Select Your Vehicle
view cartView Cart

Mud Flaps > 2010 > Ford > F-150

WeatherTech Mud Flaps for the 2010 Ford F-150

WeatherTech Mud Flaps

ratingratingratingratingrating (6 reviews)


Code:   WT110002

Price:$39.95


Shipping Special

Shipping Weight: 3 pounds

Quantity: 






WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front Pair - 2010 Ford F-150

These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your Ford F-150 and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.

Features:

  • Install easily
    • No drilling or tire removal
    • Attach securely with "Quick-Turn" stainless steel fasteners
  • Molded from high-quality thermoplastic resin
  • Contoured digitally to fit your Ford F-150
  • Protect your Ford F-150, your trailer and other motorists from dirt and debris
  • Quantity: 2 front flaps
  • Made in the USA


Mud Flaps

Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless. Patent-pending QuickTurn stainless steel fasteners makes installation quick and easy - no drilling required.



110002 WeatherTech No-Drill, DigitalFit MudFlap - Front Pair



Video of WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front Pair


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video install weathertech mud flaps 2013 ford f150 wt110002 120002
WeatherTech Front and Rear Mud Flap Installation - 2013 Ford F-150

Video Transcript for WeatherTech Front and Rear Mud Flap Installation - 2013 Ford F-150

Today on this 2013 Ford F150, we'll be installing the WeatherTech no-drill mud flaps for the front and rear, part number WT110002-120002. Before we start our install, we're going to go ahead and turn the wheels to one side to make it easier to get to the fasteners. Now there are two fasteners on the bottom edge of the fender wells towards the bottom. We'll go ahead and remove these two screws. At this point, it would be a good idea to have a test fit of the mud flap against the fender well to see how it fits against it. You also want to make sure the attachment point on top is in its unlocked position.

Once you know how it fits up against the fender well, we can go ahead and reinstall the existing factory fasteners. The mud flap is marked with and indicator of locked and unlocked position. We'll press it against the fender well, and then take the included Allen key and go ahead and tighten down the screw. You'll see it slide over to the locked position as it grabs the edge of your fender well and tightens down. We'll go ahead and continue tightening down until it's nice and snug.

Then we'll go ahead and tighten down the other two screws on the bottom. With that, our driver side is done and we can go ahead and repeat the same process over on the passenger side. Now we can move on to the rear flaps. The first thing we need to do is go ahead and locate the two fasteners that are at the bottom of the fender well. There are two plastic rivets that we have to remove.

We'll start them off with a screwdriver. Then we'll pull the remainder out with needle nose pliers. With those pulled out, we can go ahead and take the mud flap and do a quick test fit to see how it fits up against the fender well. So now I'll take the new hardware that comes with the mud flap, the stainless steel screw and washer. We'll run it through the outside to the inside, and on the inside we'll install the black flange nut.

We'll install two of these through two holes and leave them together loose. Next, we'll work with the fastener up on top. Now if you'll notice, there's an indicator built in onto the mud flap, which is a locked and unlocked position. We'll go ahead and push it up against the edge of the fender well, and then using the provided Allen key, we'll go ahead and tighten it down. When we tighten it down, you'll see the indicator move over to the locked position. Once it's there, go ahead and tighten it down further until it's nice and snug. With those few steps, our mud flap is already installed. We'll go ahead and repeat the same process for the passenger side. Okay, and with that, that will finish it for our install of part number WT110002-120002, on our 2013 Ford F150.


2010 Ford F-150 Owners Who Purchased This Mud Flaps Also Bought...






Customer Reviews

WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front Pair - WT110002

Average Customer Rating:  ratingratingratingratingrating4.3 out of 5 stars   (6 Customer Reviews)




- WT110002

ratingratingratingratingrating by: Art Hetzel10/30/2013

Is this review helpful?


My initial order was placed in error when I transposed a number. However, the service to exchange the item and receive the correct model was excellent and very timely! Great customer-based company and my after-market parts fit like a glove!!! Thanks so much!!!105686



- WT110002

ratingratingratingratingrating by: Tyrone Penick03/06/2013

Is this review helpful?


Did not installecause of gap it would leave at top between flap and fender. Item was suppose to be custom fitted.69211



- WT110002

ratingratingratingratingrating by: Paul A.01/09/2014

Is this review helpful?


Fits great , installed in minutes . 112307



- WT110002

ratingratingratingratingrating by: Gary03/15/2013

Is this review helpful?


The WeatherTech FIT My F150 PERFECTLY. Literally 10min to install. This product MADE IN USA, makes me PROUD to enhance my truck with AMERICAN INGENUITY.70832



- WT110002

ratingratingratingratingrating by: max02/11/2013

Is this review helpful?


installed on a 2012 F150, excellent fit and finish, easy no drill job.65771



- WT110002

ratingratingratingratingrating by: Shane S.08/14/2012

Is this review helpful?


These were super easy to install and function as expected.51656



Ask the Experts about this WeatherTech Mud Flaps
Expert Answers about WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front Pair - WT110002                                          Do you have a question about this Mud Flaps?



Ford F-150 Accessories


Info for this part was:


Test Fit:
Joe V

Video Edited:
Zack K

Video by:
Andrew K

Written by:
Lindsey S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email



Only 12 Hours 51 Minutes Remaining

etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com