Call at 800-298-8924 for expert service. We are your Toyota headlight lens protectors experts, and offer a lowest price guarantee. carries a complete line of Husky Liners products for your Toyota Matrix 2010. Husky Shield Headlight Protectors - 1 Pair part HL07927 from Husky Liners can be ordered online at Complete headlight lens protectors installation instructions and technical support.
Select Your Vehicle

View Cart

Lamp Guards > 2010 > Toyota > Matrix

2010 Toyota Matrix Husky Shield Headlight Protectors - 1 Pair

Husky Liners Headlight Lens Protectors

(6 reviews)

Code:   HL07927



Shipping Special

Shipping Weight: 1 pounds


2010 Toyota Matrix - Husky Shield Headlight Protectors - 1 Pair

Keep your headlights looking their best for the long haul. These durable, UV-resistant guards help prevent damage caused by rocks, road debris, salt and oxidation, all of which reduce brightness and overall effectiveness of your Toyota Matrix's lights.


  • 8-mil-Thick, impact-resistant urethane film helps to prevent damage to headlight lenses
    • Guards against road debris, salt, sand and oxidation caused by UV rays
  • Custom-made, pre-cut pieces perfectly fit your Toyota Matrix's headlights
    • Virtually invisible film maintains sleek, factory look
  • Fast, easy installation with included tools and instructions
  • Made in USA
  • 5-Year limited warranty

Layout of Husky Shield headlight protectors on Toyota Matrix

Note: The glowing outlines in the image above show how the included headlight guards are formed and where they will install on your Toyota Matrix's headlamp assemblies. The headlights on your Toyota Matrix should resemble those pictured above.

Every day your headlights face the damaging effects of rocks, sand, dirt and road debris. In the winter, they may take a beating from salt-laden slush. And all day long, they suffer from exposure to harsh UV rays. With Husky Shield headlight guards, this damage can be a thing of the past. The impact-resistant urethane material is thin and flexible enough to glide easily onto your Toyota Matrix's headlights, yet it is thick and durable enough to withstand rocks and flying debris. The film also has UV inhibitors that minimize the oxidation caused by sunlight, preventing yellowing of the lenses.


Note: It is recommended that you apply Husky Shield headlight guards after polishing your lenses. Most polishing kits on the market work to remove damage, but they also remove the thin, hard-coat protective layer that sits atop acrylic and polycarbonate lenses. Applying this urethane film over just-polished headlights will seal the lenses while they look their best and prevent future damage by creating an impact- and UV-resistant barrier.

Husky Shield Installation Solution

After thoroughly cleaning your headlight lenses, apply the included solution to one of the lenses, to your hands and to the film itself. This solution not only lets you easily position the guards on your lights, but it also keeps the film free from fingerprints and other contaminants. The film must remain wet throughout the installation process to ensure proper placement.

Husky Shield Squeegee

Once you have the protector in place on the headlight lens, set the film by squeegeeing out the solution. Make sure that the outside of the film remains saturated during this process so that the included application card can slide smoothly along its surface. If you are not happy with the position of the film, gently peel it back while wetting the adhesive side with additional solution, and reset.

07927 Husky Liners Husky Shield HeadLite Guards

Customer Reviews

Husky Shield Headlight Protectors - 1 Pair - HL07927

Average Customer Rating:  4.0 out of 5 stars   (6 Customer Reviews)

Keep your headlights looking their best for the long haul. These durable, UV-resistant guards help prevent damage caused by rocks, road debris, salt and oxidation, all of which reduce brightness and overall effectiveness of your vehicle's lights.

- HL06707

by: Gerardo C09/02/2014

Review from a similar Husky Liners Shield in Headlight Lens Protectors

I installed the film about 2 months ago. I'm pleased so far. I hope the film lasts the 5 year rated period. Attached are photos with the product I ordered. 149522


1 year in and still looks like the day they were installed. Im still pleased with results and protection.

Gerardo C - 09/02/2015


- HL06209

by: Gar06/29/2014

Review from a similar Husky Liners Shield in Headlight Lens Protectors

I rated this good, not because of the product, but because of the extreme difficulty to apply this product. Two of us read the instructions, then ALSO watched the 9 minute video on the Husky web site to see how it's done. So two people reviewed two types of instructions. We spent 2 hours (supposed to take 1) trying to get this to lay correctly without bubbles/fingers, and we could not do it on a 2012 Silverado. I'm no stranger to working on cars (I'm a past mechanic). If you buy this product, you will like it. But our advice is: DON'T INSTALL IT YOURSELF. We could not get the lower/bottom edge to be even with the hood -- just when laying it down at the start (yes, the adhesive side was down). The amount of stretching to get it to even start to be even with the hood-line was phenomenal...and that still didn't work. complaint's against the product. It is not easy as it looks to apply it. We pulled it off the truck and tossed it because it just didn't do what we knew it should do and it looked poor. It pained us to toss that $$. 138257

- HL07247

by: Lisa S. - Employee11/24/2014

Review from a similar Husky Liners Shield in Headlight Lens Protectors

Installation was easy, and we're happy with these headlight protectors. We've had them on our Corvette for a few months, and they still look great. 162349

- HL07967

by: Cesar02/28/2013

Review from a similar Husky Liners Shield in Headlight Lens Protectors

Not good at all, they should make some cuts in the middle of the protector in order to fit in round part of the headlight. I followed all the spetps but still, I couldn't fit the front adhesive protector. It's a good idea but they should make some test before putting each design in the market. 68156


I just had the same problems - I wish I had seen this review earlier! The round headlight on the Jeep Wrangler makes installation [difficult].

comment by: Russ J - 07/02/2014


- HL06987

by: Frank10/15/2014

Review from a similar Husky Liners Shield in Headlight Lens Protectors

Shields look thick enough to provide advertised protection. Take your time during application. If doing outside, wait for a calm day and watch for bugs trying to land on lights while your laying the sheet down. Process is easy and sheets allow for adjustment while wet. Getting the few bubbles out not hard. Once everything dries about 2 hours later, you can't see that they are on. 155906

- HL07817

by: JPC06/06/2013

Review from a similar Husky Liners Shield in Headlight Lens Protectors

Easy to install just read the instructions & follow it. It takes us between 15-25 mins to do it. Looks like nothing was put in the headlamp to protect it. I should have known the product when my truck was brand new ( 1 yr & 7 months now) but anyway no regrets a very good product that fits on my Toyota Tundra SR5. 83618


Ask the Experts about this Husky Liners Headlight Lens Protectors
Do you have a question about this Headlight Lens Protector?


    At we guarantee:

    Highest quality headlight lens protectors for the best price.

    Real product know-how.

    • We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. This helps you get the right product the first time.
    • Every day our teams test, review, assemble and install our products. Our modern installation facilities allow our expert installers and customer service representatives to actually install and use the items we sell, so you can get real advice, from a real person who has the knowledge and expertise needed to solve your problem.

    Most detailed, accurate headlight lens protector information available.

    • Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.

    Information for this part was:

    Written by:
    Lindsey S

    Installations, made easy.

    • We love helping people.
    • We have the most highly trained customer service, hands-on experience, step by step videos and installation instructions. We are prepared to answer any question, give advice, or troubleshoot any problem you come across.

    Fast shipping.

    Personalized service for life.

    • We provide one-on-one, personalized service from the ordering process through the life of your product.

    Trusted since 1946.

    • We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.

    Info for this part was:

    Written by:
    Lindsey S

    At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

    Stay Connected

    Subscribe to email newsletter


    privacy - we don't send unsolicited email

    All images, layout and content copyright