Erickson Over-The-Cab Truck Bed Ladder Rack - Steel - 1,000 lbs
Item # EM07707
Retail:$882.34
Our Price: $840.91
You Save: $41.43
Confirmed to Fit
1998 Dodge Dakota
6-1/2 Foot Bed
8 Foot Bed
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (33)
- Q & A (0)
- Photos
- Used (1)
1998 Dodge Dakota - Erickson Over-The-Cab Truck Bed Ladder Rack - Steel - 1,000 lbs
- Truck Bed
- Fixed Rack
- Erickson
- No-Drill Application
- Over the Cab
- Fixed Height
This steel ladder rack with an over-the-cab extension lets you haul ladders, pipes, lumber, and other long cargo on your truck. Side rails provide extra load support and multiple tie-down points. Easy, clamp-on installation. Fits most truck beds.
Features:
- Extended-length truck bed ladder rack lets you haul ladders, lumber, and more with ease
- Over-the-cab extension allows you to carry longer loads
- Front crossbar adjusts to accommodate different size cargo
- Side rails provide multiple tie-down points and extra load support
- Convenient tie-down cleat on each upright provides additional place to anchor your cargo
- Curved grab-handles on rear of rack provide extra leverage for loading cargo
- Aerodynamic design reduces drag and wind noise
- Easy installation with patented clamps - no drilling required
- Bed rail clamps are pre-drilled for optional permanent installation - hardware not included
- Universal system adjusts to fit most truck bed widths
- Sturdy steel construction
- Black powder coat finish resists corrosion, chips, and scratches
- Corrosion-resistant, yellow-chromate-plated hardware
- Compatible with bed liners and toolboxes
- Toolbox installation requires some modification on truck beds without bedliners
Specs:
- Weight capacity: 1,000 lbs
- Dimensions: 135" long x 54-13/16" wide x 32-7/8" tall
- 90-Day limited warranty
Notes:
- Due to the size of this item it ships via truck freight and only to the contiguous United States.
- Will not work with tonneau covers. If your truck has a bed liner some alteration may be required to properly install this ladder rack.
Over-The-Cab Ladder Rack
This Erickson ladder rack extends over the roof of your truck to maximize your carrying capacity. It has integrated side rails for load support and for tying down your gear. The extra coverage allows you to carry longer loads without having to worry about overhang. And the added surface area for cargo helps to evenly distribute load weight.
Easy, Clamp-On Installation
Sturdy, user-friendly clamps let you mount this rack to your truck bed without drilling or other modifications. Simply position the bases at the corners of the truck bed and clamp them to lips of the truck bed rails. Assemble the upper portion of the rack and attach it to the uprights, then bolt the uprights to the bases. The rack can be installed on short-bed or long-bed trucks.
There are holes in each bed rail clamp that allow you to permanently bolt the rack to your truck bed. Permanent installation will require drilling. Hardware not included.
If you are installing the rack on a truck bed without a bed liner, the bolts for the mounting clamps may cause interference when installing a toolbox. To install a toolbox on a truck bed without a bed liner, trimming of the clamp bolts may be necessary for the toolbox to sit flush on your truck's bed rails.
Load Support and Security
The ladder rack has integrated side rails that provide load support and multiple tie-down points for securing your cargo. A moveable crossbar in the over-the-cab extension helps provide extra support for the front end of a load. There is a convenient tie-down cleat on each of the rack's 4 vertical uprights to provide additional anchoring points for your truck's load. There is also a handle on each side of the rack at the rear to provide additional leverage and support for easier loading and for accessing that hard-to-reach cargo.
Sturdy Steel Construction
Steel is highly durable, maintains structural integrity, and does not age or decay as quickly as other materials. A black powder coat finish has been added to help resist corrosion, chips, and scratches, and to keep the rack looking new. The nuts and bolts have a yellow chromate plating that helps prevent corrosion.
07707 Erickson Universal Contractor Pickup Truck Bed Rack - Steel - 1,000 lbs
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Customer Reviews
Erickson Over-The-Cab Truck Bed Ladder Rack - Steel - 1,000 lbs - EM07707
Average Customer Rating: 4.6 out of 5 stars (33 Customer Reviews)
This steel ladder rack with an over-the-cab extension lets you haul ladders, pipes, lumber, and other long cargo on your truck. Side rails provide extra load support and multiple tie-down points. Easy, clamp-on installation. Fits most truck beds.by: David10/17/2023
Great value full size ladder rack. Very impressed with the quality and how durable the steel frame is. 1-year in, haven't had any issues with rusting or loose bolts, which is what I have experience in the past from similar racks. Would highly recommend if you need a full-size ladder rack for a small to mid-size truck.
by: Chris 08/08/2022
Easy assembly and installation I had to modify the J-bolts or buy different ones for my bed, but they were readily available at the hardware store.
I use it for hauling lumber, steel, kayaks. It has been a terrific addition to my truck.
by: jcole03/18/2019
Used it for mounting roof top tent onto utility trailer.
Also used to attached water jugs, propane tank, water tank, cree lights, etc.
Also used to carry kayak and atv.
Rack is high enough from trailer to carry atv and still carry tent on top.
by: Stuart 01/25/2024
This is a quality built rack, fit precisely with little effort, will buy again when needed.
by: Robert 02/08/2024
2022 Ford Ranger
Very easy to put together, seems sturdy and well made.
by: Chris 02/07/2024
2010 Chevrolet Colorado
Easy Ordering and Fast Shipping
by: Sue02/14/2019
2006 Ford F-150
This ladder rack has been great. Very sturdy construction, easy to put together, no issues with rusting, so the coating is holding up well. The only small issue we had with it is that it seems to sag in the middle where the front and the back join just a little bit. We can't quite seem to get it level. It's very possible that is due to how we put it together, but we can't quite seem to fix it. It wouldn't matter much except that we are hauling boats and having the cross bars be level with each other would be helpful.
Sue
2/18/2020
Still a great product! Has held up really well. Weve taken it off and put it back on multiple times. It takes 2 people to lift it off, but is extremely easy. Definitely a great product
by: Bryan S.09/10/2020
The process with etrailer was very easy and I received the items quickly. I've had the ladder rack for about a year. The rack has helped out and has save me a lot of money on delivery fees for 16'-20' length materials. I've had this thing loaded down and it worked great. I travel about an hour to the job site each day and do a lot of highway driving. Around town there isn't any difference but, on the highway, the rack adds a lot of noise which is expected. No complaints there but, just so you're aware. I think the only con I have is after about 6 months, I started to notice rusting around the welds and bolt holes. After about a year I am noticing more but, it appears to just be on the very surface so I don't see where it will affect the integrity of the load allowance. I'll probably end up getting an outdoor spray covering to spray over the rust spots after I sand them down before winter. One workaround that I had to do while installing the rack was in regards to my toolbox that goes across the front of the bed. I had to drill thru the inside of the toolbox so the bolts would slide thru. All in all this product has been worth every penny and, for me, paid for itself after about 3 months. I'd recommend it.
by: Don11/17/2022
Paint falling off rack in multiple area. Use is in the mountains, not due to roas salt.
Jenny N.
11/21/2022
You mentioned that the paint was falling off in places. I recommend using a rust resistant paint such as Rustoleum to touch up the rack.
by: Marty 07/07/2023
2012 Ford F-150
Easy assembly, heavy duty, and just a good product
by: Mel05/25/2021
The kit came timely, assembled easily and adjusted to my pickup with no issues. This is a sturdy product and I expect to get years of service from it.
by: K.01/26/2018
Excellent build.
Sturdy ladder rack.
Easier to have 2-3 people assembling the ladder rack as opposed to 1 person.
Only issue is the rear top bolt may occasionally come loose, but that may be an error on my end.
5/5 star ladder rack.
by: Paul M12/11/2016
2012 Nissan Frontier
This rack exceeded my expectations. The quality is second to none. Installation was quick and if required, removal is even quicker. Adding this rack to my Nissan Frontier has given me much more functionality and increased capability.
Delivery took a little longer than expected, but customer support at etrailer kept me informed and sought alternatives if I couldn't wait. I wouldn't hesitate to recommend this product or the good folks at etrailer to get it to you.
by: Justin 02/03/2022
2012 Nissan Frontier
Fits my 2012 Nissan Frontier perfectly! I did have to remove the utilitrack system in order for the J hooks to install properly, but that’s a small sacrifice in order to have rack up top!
by: Tim S07/01/2017
Love the product, fits just about any truck and is easy to take off. The only thing I didn't like was the assembly instructions. Very hard to read and understand what went where.
Tim S.
7/3/2018
Works great. The Erickson ladder rack works great for my business. The only issue was understanding how to put it together, but once that was figured out I’ve had no problems with it.
by: Rick12/18/2018
We have 2 of this item on our trucks and they have been awesome! This has been an excellent product, build right and does what it is suppose to do... They are still looking as good as the day we installed them on our trucks... We will order more as the time comes that we need them! The company had lots of farther up emails along the way of ordering and after the product was installed. Great company to do business with.....
by: Junk06/17/2020
After owning it for a year I would highly recommend getting a single piece ladder rack. For the money this isn't worth it, it rusts at all welds and doesn't line up correctly. Spend the time and money on a one piece.
by: Mike06/29/2017
1971 Chevrolet C/K Series Pickup
Fits my 71 C10 great. Looks good and can carry everything I need. Best looking rack out there in my opinion
by: Barbara 08/23/2022
Great product!
by: Charles07/31/2021
2015 Ram 2500
great
Charles
8/1/2022
great
by: Vern 09/13/2021
Great rack! Strong! Installs pretty easy, might need one other person (I did it by myself).
by: Paul03/16/2018
There are a few rust spots already
by: Happy C01/06/2022
2004 Ford Ranger
Very well built, heavy duty, high quali ty.
by: Paul 01/07/2024
by: 02/19/2024
25
33
Show More Reviews
See what our Experts say about this Erickson Ladder Racks
- Option for 2015 Nissan Frontier for Ladder Rack/Roof RackWhile we don't offer single upright ladder racks we do have ladder racks that fit your 2015 Nissan Frontier like the Erickson part # EM07707 which basically gives you a ladder rack for the truck bed with an over the cab extension that extends forward of the cab to create basically a roof rack for the truck as well.
view full answer... - Will Erickson Over the Cab Ladder Rack EM07707 Clear Truck Cab of 2016 Chevy Silverado 2500I can assure you that the Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 will fit your 2016 Chevy Silverado 2500 and clear the cab of the truck. The height from the underside of the lower tube of the rack down to the top of the truck bed rails is 32-7/8 inches. I also attached a picture of a 2015 Silverado that has the same cab height as yours and you can see there is plenty of clearance between the overhang of the rack and the truck cab.
view full answer...
- Recommended Truck Bed Ladder Rack for a 2013 Ford LGT CONVTNL F-150I do have ladder rack options for your 2013 Ford LGT CONVTNL (F-150) but none of them will reach all the way to the nose of the truck. Instead, we have what are known as "over-the-cab" ladder racks which as the name states, extends over the cab of the vehicle. For this, I recommend using the Erickson Over-The-Cab Truck Bed Ladder Rack part # EM07707. This rack will fit F-150's with the 5-1/2', 6-1/2', and 8' beds. It has a 800 lb weight capacity, aerodynamic design to reduce drag, and...
view full answer... - Will the Erickson Over-The-Cab Truck Bed Ladder Rack Fit a 2023 Ram 2500 Long BedThe Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 does not have a difference in bed styles since it will work with both the 6 1/2' and 8' bed models of the 2023 Ram 2500.
view full answer... - Is Rear Bar Detachable on Erickson Over-The-Cab Truck Bed Ladder RackThe Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 referenced in your question is confirmed to fit your 2007 Dodge Ram 3500 Megacab and is a great product that will provide you with 800 pounds of weight capacity. The rear bar of the ladder rack serves to stabilize the rack's construction when it is installed, making it a non-removable part. If you will be hauling taller loads in your truck bed, you may be able to fit them between the rear bar and front bar so that they can clear...
view full answer... - Can Back Rail On Erickson Over-The-Cab Truck Bed Ladder Rack Be Removed For Taller ItemsThe construction of the Erickson Over-The-Cab Truck Bed Ladder Rack, part # EM07707 uses the back rail to make the ladder rack stable and is not a removable part. I confirmed this with my contact at Erickson. You may be able to place something between the back rail and the forward rail if it happens to be taller than the ladder rack which is 32-7/6 inches tall.
view full answer... - Will Erickson Over-The-Cab Truck Bed Ladder Rack fit 2015 Chevrolet Colorado with 6 Foot BedThe Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 is confirmed to fit the 2015 Chevrolet Colorado with 6 foot bed. It is also confirmed to fit the Colorado with 5 foot beds. The ladder rack is adjustable to fit most truck bed. This ladder rack is compatible with bed liners and toolboxes.
view full answer... - Ladder Rack Recommendation for 2006 Chevy Silverado 3500 Long Bed If it were me I would go with the Erickson over the cab ladder rack part # EM07707 for your 2006 Chevy Silverado 35000 long bed. This gives you a nicer ladder rack that would do a great job carrying pipes/ladders that isn't super expensive. It also has multiple tie down points and does not require drilling to install.
view full answer... - Compatibility of the Erickson Over-The-Cab Ladder Rack on a 2016 GMC Sierra 1500The Erickson Over-The-Cab Ladder Rack, # EM07707, will fit the 5-1/2, 6-1/2, and 8 foot beds of the 2016 GMC Sierra 1500 truck. The ladder rack uses a non-drill clamping system to connect to the bed of your GMC, making for fast and easy installation. With its sturdy steel construction, the Erickson ladder rack has a maximum weight capacity of 800 lbs and this ladder rack is compatible with bed liners and some toolboxes.
view full answer... - Ladder Rack Options For A 2013 Nissan Frontier With 5 Foot Bed And Factory Utili-Track SystemYes, the Erickson Truck Bed Ladder Rack w/ Load Stops - Steel part # EM07707 is a confirmed fit for your 2013 Nissan Frontier with the factory Utili-Track System and will not require you to remove any of the factory equipment. This rack has an 800 lb weight capacity, crossbar length of 78", and upright support bar height of 33-1/2". I have attached a test course review video of this rack for you.
view full answer... - Will Erickson Over-The-Cab Truck Bed Ladder Rack Clear the Roof Rack on a 2011 Nissan FrontierOn the Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 from the top of the bed side where it mounts to the bottom of the main frame bar it is approximately 30 inches. You can measure from the top of the bed side to the highest point on the roof rack to determine if that 30 inches is enough or if you need something that is taller.
view full answer... - Will the Erickson Over-The-Cab Truck Bed Ladder Fit a 1995 Toyota Tacoma Yes, the Erickson Over-The-Cab Ladder Rack, # EM07707, is a confirmed fit on the 1995 Toyota Tacoma truck. Note that the ladder rack will not work with a tonneau cover and if the truck has a bed liner, some alteration may be required to properly install this ladder rack.
view full answer... - Design of Erickson Over-The-Cab Truck Bed Ladder RackI verified with Erickson that the design of the ladder rack # EM07707 has never changed from the original. The picture and video I've linked shows the actual design.
view full answer...
- Is Install Hardware of Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 PermanentThe hardware of the Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 that you referenced would not be considered temporary install hardware. As long as you install the rack according to the instructions it can be left on for as long as needed and you'd be totally fine. If you really wanted to drill through the mounting brackets and then through the bed rail to really lock it down that is something that you could do but you'd end up permanently modifying the vehicle and rack, plus...
view full answer... - Does Erickson Over the Cab Ladder Rack Fit 2022 Ram 2500 Long Bed Crew CabHey James, yes the Erickson Over the Cab Ladder Rack part # EM07707 that you referenced is a confirmed fit for your 2022 Ram 2500 long bed crew cab.
view full answer... - Does Erickson Ladder Rack EM07707 Fit 1999 Dodge DakotaThe Erickson Ladder Rack part # EM07707 is a confirmed fit for both the short and long bed versions of the 1999 Dodge Dakota. It would work well for your quad cab model.
view full answer... - Will Erickson Ladder Rack with Cab Extension Fit a 2014 Nissan Frontier SV Crew Cab Short BedThe Erickson ladder rack with cab extension # EM07707 is listed as a fit for the 2014 Nissan Frontier crew cab short bed. This is basically a universal fit item for mid-sized trucks. I have included a link to a video review of this ladder rack for you.
view full answer... - What is the Weight of the Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707The total weight of the Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 that you referenced is 167 lbs. It installs in sections though so you wouldn't be required to support all of that weight at one time with either just yourself, buffy, or bubba. In the picture I attached you can see all of the pieces of the rack laid out to show you how large of pieces you'd need to move.
view full answer...
- Does Erickson Over the Cab Ladder Rack part # EM07707 Fit 2015 GMC Sierra 3500 Long BedYes, the Erickson Over the Cab Ladder Rack part # EM07707 is a confirmed fit for your 2015 GMC Sierra 3500 with a long bed and diesel engine.
view full answer... - What Are The Dimensions Of Erickson Over-The-Cab Truck Bed Ladder RackThe Erickson Over-The-Cab Truck Bed Ladder Rack, part # EM07707 measures 135 inches long x 54-13/16 inches wide x 32-7/8 inches tall. This rack has a weight capacity of 800-lbs. This is an easy, no-drill installation by clamping to the bed rails of your truck.
view full answer...
- Does Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 Fit 2012 Ram 2500For your 2012 Ram 2500 Erickson test fit the part # EM07707 that you referenced and they found that it fit well and cleared the factory cab lights on top of the truck so it would fit and work well for you.
view full answer... - Will Erickson Ladder Rack and Cab Extension Fit a 2008 Toyota Tundra Long BedErickson ladder rack with cab-over extension # EM07707 will fit your 2008 Toyota Tundra if it does not have the factory deck rail system. You can mount a basket on the cab-over part but you will most likely need longer hardware than what comes with a basket because the diameter of the tubing on the ladder rack is too large for it to fit.
view full answer... - Will the Erickson Over the Cab Truck Bed Ladder Rack part # EM07707 Fit a 2010 Ford F-150The width of the Erickson Over the Cab Truck Bed Ladder Rack part # EM07707 that you referenced is adjustable. We checked with Erickson and this rack is a fit for your 2010 Ford F-150.
view full answer... - Over the Cab Style of Ladder Rack Recommendation for 2009 Nissan Frontier With Utili TrackI have a very similar ladder rack that does fit your 2009 Nissan Frontier crew cab with the utili track but the MaxxTow MT70232 that you referenced does not fit with the utili track. Instead you'd want the Erickson Over the Cab Ladder Rack part # EM07707 which is a confirmed fit and gives you the same style of ladder rack.
view full answer...
Do you have a question about this Ladder Rack?
Used Items Available
Condition: Surface Scratches
Notes: Item has minor cosmetic paint damage and scuffs. Otherwise new and unused.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Edited by:
Tyler C
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Alex H
Test Fit:
Jared G
Test Fit:
David F
Written by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Chris
8/9/2023
Great! I mostly use it for kayaks now that Ive retired. The only downside ive noticed is the noise from the turbulence when the rack isnt loaded.