Hitch Covers > OEM > Dodge, Ram > Fits 1-1/4 Inch Hitch, Fits 2 Inch Hitch, Fits 1-1/4 and 2 Inch Hitch > Light-Up > Logo > Emblem > Plastic Face > Reese

Ram LED Brake and Tail Light Trailer Hitch Cover - 1-1/4" and 2" Hitches

Rating: rating rating rating rating rating
18 reviews

Code: 86066

Retail:$39.99

Price:$34.95

Shipping Weight: 1 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Quantity:

Reese Hitch Covers 86066 Review - Video

Reese Hitch Covers - 86066

Style and safety combine in this distinctive hitch cover. It prominently features the Dodge Ram insignia with red LEDs that shine when you activate your vehicle's tail lights or brakes. Proudly display the recognized Ram symbol in unique fashion.

Features:

Officially licensed, 3-D Ram logo adds a stylish touch to your vehicle
Red LEDs light up to give your vehicle some flash and make it more visible, as well as to alert other drivers to slow down or stop when you do
- Low illumination while you're using tail lights
- High illumination when you brake or engage the hazard lights
- Energy-efficient LEDs are long-lasting
Hitch cover protects your vehicle's hitch receiver from water and dirt
Simple installation
- Cover slides into your 1/1-4" or 2" trailer hitch receiver
  - Included plastic tubing and foam gaskets ensure a snug, rattle-free fit
- Wiring harness plugs into your vehicle's existing 4-pole plug
- Pin and clip or hitch lock (sold separately) is required
Corrosion-resistant plastic construction with metallic coating that becomes transparent when lights are activated

Specs:

Application: 1-1/4" x 1-1/4" and 2" x 2" trailer hitch receivers
Face dimensions: 4-3/4" wide x 5-1/4" tall
Cord length: 16"
90-Day warranty

Reese Towpower has created this Ram LED hitch cover to look like an ordinary Dodge Ram logo in daytime, non-braking situations. When you turn on your vehicle's tail lights or activate the brakes, the cover's unique metallic coating becomes transparent, and bright red LEDs shine through. The long-lasting LED cells have two intensity settings. The red lights use low illumination when your vehicle's tail lights are on and high illumination when you activate your brakes or hazard lights.

Hitch covers are fun to show off and they look cool, but they do more than just accessorize your vehicle. Your Ram light-up hitch cover helps to keep dirt out of the receiver and deters rust, so you can easily install ball mounts and other hitch accessories when you need them. This hitch cover is a great way to protect your receiver and proclaim your loyalty to the renowned Dodge brand, all in one.

86066 LED Lighted 1-1/4" and 2" Hitch Cover by Reese Towpower - Ram Logo

Video of Ram LED Brake and Tail Light Trailer Hitch Cover - 1-1/4" and 2" Hitches

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Reese Hitch Covers 86066 Review

Video Transcript for Reese Hitch Covers 86066 Review

Today, were gonna review part number 86066. This is the Reese Dodge Ram LED Brake and Tail Light trailer Hitch Cover to fit 1-1/4 and 2-inch hitch receivers. This is an officially licensed 3D Dodge Ram logo, which will add a stylish touch to your vehicle. It uses red LED lights, which will light up to give your vehicles some flash and make it more visible as well as to alert other drivers to slow down or stop when you do. When plugged in, it has a low illumination, which will be used when youre using your tail lights and then it goes to a higher or brighter illumination when you apply your breaks or engage the hazard lights. It does use energy efficient LEDs, which are long lasting.

This hitch cover does come with a foam gasket, which will help protect your vehicles hitch receiver from water and dirt. Im going to give you a few dimensions on it. The overall width on this would be 4-3/4 inches. The height is 5-1/4 inches. This does come with a 90-day warranty.

It is made of a corrosion-resistant plastic with a metallic coating that becomes transparent when the lights are activated. Now, this part will come with the 1-1/4-inch adapter that would bolt on and a gasket to be used with that. It also comes with the 2-inch, which I have already attached to the hitch cover and the gasket for that and the mounting hardware is included. This is a simple installation. Once this is attached to your hitch cover, whichever adapter size you need, you would just then put your foam gasket on.

I got a 2-inch hitch receiver here. Slide it in until the hole would line up. Now, it does use a pin and clip or a hitch lock, which is sold separately. You just slide it in, line it up, put your pin through, and then you can plug it in. I have a power supply here, a 4-way, that Im going to plug in to give you an idea of the brightness on this hitch cover.

Okay, with that plugged in, that would be with the tail lights on, and then when you apply the brakes or the hazard lights, it would light up even more. Now, I want to give you an idea of what it would be with the overhead lights off, to give you an idea at nighttime. That would be just with the tail lights on and then when you apply your brakes or hazard lights it would light up even more. Again, this part comes with a 90-day warranty. That should do it for part number 86066.

Customers compare 86066 to these similar products