See What Fits Your Vehicle
customer service | view cart  View Cart

Hitch Cargo Carrier > Flat Carrier > Folding Carrier > Fits 2 Inch Hitch > Class 3 > 6.7 Square Feet > Steel > 500 lbs > 20 x 48 Inch > Draw-Tite

20x48 Folding Cargo Carrier For 2" Trailer Hitch Receiver

Draw-Tite Hitch Cargo Carrier

Rating: ratingratingratingratingrating
12 reviews


Code:   6502

Retail:$245.49

Price:$180.95

Shipping Weight: 50 pounds

Shipping Special
Quantity: 




Draw-Tite Hitch Cargo Carrier - 6502

This cargo carrier tilts up for easy installation and storage, and offers license plate relocation holes if the carrier obscures the license plate.

Features:

  • Tilts up for easy installation and storage
  • Mesh floor for easy cleanup
  • Raised lip helps retain cargo
    • Includes attachment holes for tie-down straps
  • Angled design for maximum ground clearance
  • Black powder coat paint resists corrosion
  • Hitch pin and clip included
  • Reflector tape included for extra safety

Specs:

  • 500 lbs capacity
  • Actual carrier weight: 48 lbs
  • Measures 13" from the center of the hitch pin hole to the closest edge of the carrier
  • When folded up, distance measures 7-1/2" from the center of the hitch pin hole to the closest edge of the carrier
  • Side lip measures 3" tall

6502 folded up




Video of 20x48 Folding Cargo Carrier For 2" Trailer Hitch Receiver


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video review tilting cargo carrier 6502
Pro Series 20 by 48 Folding Cargo Carrier Review

Video Transcript for Pro Series 20 by 48 Folding Cargo Carrier Review

Today we are going to show you the Pro Series 20 by 48 folding cargo carrier for 2 inch hitches, part number 6502. The carrier measures 13 inches from the center of the hitch pin hole to the closest edge of the carrier platform. When folded up, the distance measures 7-1/2 inches from the closest edge of the carrier to the hitch pin hole. The Pro Series 20 by 48 cargo carrier uses a step shank to add extra ground clearance behind the carrier. To utilize the folding feature remove the pin, tilt the carrier all of the way to the upright position and re the pin in the lower securing hole. The carrier is folded up and secure out of the way. The carrier is finished with a black powder coat paint. 0:44

There is a 3 inch tall lip that goes around the entire floor of the carrier. Along the lip are several predrilled mounting locations that you can use, as well as holes for license plate brackets if you need to move the license plate off your vehicle. Make sure that when you use your bungee cords to not attach them to the floor of the carrier itself. When you load the carrier, make sure you place the heavier items over the center of the carrier where the shank is and put your lighter items towards the outside. Today we are going to be using an elastic cargo net to secure our load on the cargo carrier. And there you have it for the Pro Series 20 by 48 folding cargo carrier, part number 6502.


Customers compare 6502 to these similar products





Customers Who Purchased This Hitch Cargo Carrier Also Bought...






Customer Reviews

20x48 Folding Cargo Carrier For 2 - 6502

Average Customer Rating:  ratingratingratingratingrating5.0 out of 5 stars   (12 Customer Reviews)




- 6502

ratingratingratingratingrating by: Bill S.07/14/2012

Is this review helpful?


Okay. Here’s the scoop on the Draw-Tite 20x48 Folding Cargo Carrier For 2" Trailer Hitch Receiver. I bought it since it looked like the best choice to carry camping cargo on my 2010 RAV4. I believe I was right and that it was and is the best choice. In the “up” position it clears the rear door-mounted spare tire. No extension is needed to get it to clear the rear spare tire. I thought that the 48” width was perfect and that a 60” wide carrier was a too wide for my RAV4. Also, the #59102 (waterproof) Rola Expandable Cargo Bag, 9.5 to 11.5 cubic feet fits PERFECTLY in this cargo carrier I had no need for a larger carrier. I just use it for camping and carrying extra gear so the back of the RAV4 is not loaded with stuff. When I’m at my destination I empty the Rola bag contents, put it inside the back of the RAV4 and put the carrier in the “up” position until I’m ready to break camp, re-load the Rola bag and move on. I use a Draw-Tite Receiver that I mounted on my RAV4. So to hold the 2” shank firmly in the Draw-Tire receiver and keep it from rattling I got a #63201 Draw-Tite J-Pin Stabilization Pin and Barrel Lockset from etrailer. It you do not have a Draw-Tite Receiver, then this stabilization pin may or may not fit. If it doesn’t fit then—at least—you can get a #SR25219 Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches from etrailer. It looks like it will accomplish the same thing if the Draw-Tite J-Pin Stabilization Pin will not fit your receiver. The Draw-Tite J-Pin Stabilization Pin is a little easier if you take the Draw-Tite 20x48 Folding Cargo Carrier on and off a lot, but it is no big deal. Anyway, the Draw-Tite 20x48 Folding Cargo Carrier folds up when you’re not using it and down when you’re using it so the point is that it is the kind of carrier that someone would get when you don’t want to be putting the carrier on and taking it off your vehicle a lot. I suggest using Draw-Tite J-Pin Stabilization Pin or the Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin, or something similar to hold the shank firmly. But the Draw-Tite 20x48 Folding Cargo Carrier would still rattle ALL THE TIME as I drove down the road. It didn’t matter if it was in the “up” or “down” position. The reason is that the outer two holes that the included ½” safety pin goes through (this is the pin that you remove and reinsert every time you want to lower or raise the cargo carrier platform) are bigger than ½”. This is the cause of the rattle. What was the cure? I bought a 3-1/2” x ½” hex-head bolt (not a carriage bolt!) at Home Depot. (3” is too short.) I also got a ½” nut, two ½” flat washers and one ½” split lockwasher. This replaced the included safety pin. That way I could snug down the nut on the ½” bolt and every bit of the rattle went away. This “cure” cost about $1.60. I also recommend torquing the pivot bolt as much as you can. You’d have to be a competitor in the 'Worlds Strongest Man' competition to be able to over-torque it. Granted, I now have to carry a pair of wrenches to tighten or loosen the nut and bolt whenever I want to raise or lower the cargo carrier platform. But on long rides it keeps me from going crazy from rattle noise. No rattle at all. 47911

comment on this review


- 6502

ratingratingratingratingrating by: Guy Townsend05/11/2012

Is this review helpful?


Put it on my 2003 Jeep Wrangler. Looks great. I'll be using it to carry stuff to the beach. 40037

comment on this review


- 6502

ratingratingratingratingrating by: Karen12/30/2012

Is this review helpful?


Purchased receiver and cargo carrier for son's Christmas. Shipped the very same night as I ordered and they upgraded my FREE shipping so we received the items even quicker. Plenty of time for Santa's helpers to wrap. Great customer service, highly recommend.62254

comment on this review


- 6502

ratingratingratingratingrating by: DRC12/29/2012

Is this review helpful?


- Cargo carrier packaged well for shipping, no issues with parts Well built product, excellent performance on first road trip - Cargo bag kept internal contents dry as a bone through an extremely heavy rainstorm - Paid slightly more at Etrailer than at least one competitor but service and satisfaction was well worth it. 62237

comment on this review


- 6502

ratingratingratingratingrating by: Steve C.11/19/2012

Is this review helpful?


Worth the extra money! Well built, solid feel, great value!59666

comment on this review


- 6502

ratingratingratingratingrating by: C Keen11/15/2012

Is this review helpful?


Everything arrived quickly and just as described59469

comment on this review


- 6502

ratingratingratingratingrating by: Don T.09/11/2012

Is this review helpful?


Great product - just what I needed. This will complement my Jeep and it looks great. Sturdy and easy to assemble. The Rola expandable cargo bag fits perfectly and is a great compliment to the folding cargo carrier. Our trips to the beach will now leave the sand outside!54258

comment on this review


- 6502

ratingratingratingratingrating by: Larry H06/28/2012

Is this review helpful?


From start to finish the transation was excellent. This was my third purchase from etailer. Everyone of these purchases has been an excellent experiance. This cargo carrier was exactly as I expected it to be and as the sales rep represented. The sales rep was very knowledgable of the product. I highly recommend etrailer.com for any of your needs of this type.46032

comment on this review


- 6502

ratingratingratingratingrating by: Bill B05/20/2011

Is this review helpful?


Just received my cargo carrier yesterday. Unpacked it and it looks good. Received it when you said I would, held it up to my jeep and I think it is just what I wanted. I plan on using it to carry items to the Sierra Nevada Mountains which is near by and go 4-wheeling and camping. I have 2 grandaughters living with us and needed the space to carry cargo since my Wrangler dont have alot of room inside. Thanks for everything Bill B.14921

comment on this review


- 6502

ratingratingratingratingrating by: Kevin M.04/18/2011

Is this review helpful?


The cargo carrier attached easily. My only issue is that when tightened to the point there is no rattle to raise or lower the carrier floor the 3/4 bolt has to be loosened to align the hitch pin. Also the instruction enclosed was confusing and appeared incorrect. Your video showed the correct way to put it together. This is what I used.11920

comment on this review


- 6502

ratingratingratingratingrating by: Bob W.01/26/2011

Is this review helpful?


Product was better than I expected and the order and delivery process was outstanding. I would recommend you folks to anyone.6150

comment on this review


- 6502

ratingratingratingratingrating by: Jeep Wrangler12/30/2009

Is this review helpful?


Works with my spare tire I love this cargo carrier. The 13 inches is just enough clearance for the spare tire on my Jeep Wrangler. I was a bit worried about the back door clearing the rack, but found that if I remove the pin completely and let the carrier drop below its normal level, that I can also open the back door. In the regular flat position, the tire doesn't clear the lip of the rack. Works great if you don't mind undoing the pin to open the back door. I move mine around all the time. I recommend getting locking bolts to hold the license plate on so they don't rattle off. 2616

comment on this review


Ask the Experts about this Draw-Tite Hitch Cargo Carrier


  • Clearance for the 20x48 Folding Cargo Carrier when in the Folded Position
  • When the 20x48 Folding Cargo Carrier For 2 Trailer Hitch Receiver part # 6502 - is folded up, you will have 7-1/2 inches of clearance from the center of the pin hole on your receiver to the edge of the carrier closest to your vehicle. Simply measure rearward 7-1/2 inches from your receiver hitch pin hole to see if this distance will clear your spare tire.
    view full answer...

  • Recommendation for Securing a Cargo Carrier and Items On It to the Vehicle
  • You are correct the Draw-Tite Hitch Cargo Carrier, item # 6502, could be removed from the shank that installs in the receiver with the proper tools. The best method I know of the secure the carrier and the parts on it is to use the Trailer Hitch Receiver Lock with Integrated 8 foot Cable by Master Lock, item # 1470DAT. This cable and hitch pin lock will secure the carrier shank in the hitch of the vehicle and the cable can be used to secure any items on the cargo carrier. If you already ha
    view full answer...

  • Will a Full 48 Inch Long Box Fit in the Draw-Tite Hitch Cargo Carrier # 6502
  • Yes, the inside dimensions of the Draw-Tite Hitch Cargo Carrier, item # 6502, are 20 inches by 48 inches so as long as the box is not over 48 inches it will fit. If you feel that these dimensions are a bit tight, we have a couple of larger folding carriers you may want to check out. First is the SportRack Folding Cargo Carrier for 2 inch Trailer Hitches, item # A30850, which is 20 inches by 60 inches inside dimensions. Next, the Surco Products Hitch Cargo Carrier, item # 52018F, has 24 inc
    view full answer...

  • What Is Dimension Of Hitch Pin Hole to Closest Edge Of The Carrier On Draw-Tite Cargo Carrier, #6502
  • On the Draw-Tite Hitch Cargo Carrier, # 6502, has two different measurements, because the 13 inches from the center of the hitch pin hole to the closet edge is measuring with the carrier down. So with the carrier down it is measuring to the side lip of the carrier. When the carrier is folded up you have the 3 inch tall lip of the carrier and the width of the shank (2-1/2 inches) on the bottom of the carrier going back towards the vehicle. So they are both correct measurements, one is for t
    view full answer...

  • Will The Draw-Tite Hitch Cargo Carrier # 6502 Clear The Rear Swing Door On My 2004 Isuzu Rodeo
  • I walked out to our warehouse and assembled the Draw-Tite Hitch Cargo Carrier, part # 6502. From the top of the shank to the top edge of the carrier I measured 6-5/8 inches when the carrier is not folded up. Yes, you will be able to open the rear door on your 2004 Isuzu Rodeo when the Draw-Tite Cargo Carrier is attached. Part # 6502 comes with a hitch pin to secure to your hitch, for added security we have the Trailer Hitch Receiver Lock, part # 7683. I have linked a picture I took and use
    view full answer...

  • Can I Use 1 1/4 to 2 Inch Hitch Adapter With Draw-Tite 2 Inch Cargo Carrier # 6502
  • I cannot recommend using a 1-1/4 to 2 inch adapter with the Draw-Tite Hitch Cargo Carrier, because of the reduced weight capacity when using an adapter. When you use a hitch adapter, you reduce the tongue weight capacity of your hitch by half. The reason for this is that the cargo carrier will sit further out away from the vehicle putting more torque and stress on the hitch. This could potentially damage the hitch and/or the vehicle. I would recommend using the Draw-Tite Hitch Cargo Carrier,
    view full answer...

  • Will Draw-Tite Trailer Hitch Mount Cargo Carrier 6502 Clear the Spare Tire on a 2002 Jeep Wrangler
  • First, to determine what size hitch you have, measure the inside width of the receiver. If it is 1-1/4 inches, you have a Class I or II hitch. If it is 2 inches, you have a Class III or IV. I have included a link to an FAQ on hitch classes for you. To determine how much clearance an accessory will need to clear the spare tire on the 2002 Jeep Wrangler, measure from the center of the hitch pin hole back to the distance required to clear the spare tire. We have done this measurement on a 2006 m
    view full answer...

  • Recommendation For Hitch Cargo Carrier To Clear Spare Tire on 2005 Jeep Liberty
  • We have done a hitch installation on a similar model Jeep Liberty (2007) and have measured the clearance needed for a hitch accessory to clear the spare tire. The measurement from the center of the hitch pin hole on the hitch to the farthest part on the back of your vehicle, which would be your spare tire, is 14-1/2 inches. I am including a link to the video of the installation and it will show the measurement at the 2 minute and 25 second mark on the video. To be sure of the clearance on you
    view full answer...

  • American Made 20x48 inch Cargo Carrier Recommendation
  • The 20x48 Cargo Carrier # 52017 by Surco is made in America and should work very well for you. Check out the review video I attached for this product.
    view full answer...

  • Can Cargo Carrier 6502 Be Used on a 5th Wheel Trailer with Bike Adapter 6505
  • I checked with the manufacturer, and you would be able to use the # 6502 cargo carrier on the back of a fifth-wheel trailer as long as your cargo is within the listed capacities for the carrier and the hitch on the trailer. I am sorry, but they do not list the # 6505 bike adapter as a fit for the # 6502 cargo carrier. We do offer some bike racks that are rated for the use on the back of a trailer. The # PS63134 rack would be a good choice to carry 2 bikes, and it can handle the additional s
    view full answer...

  • Will Draw-Tite Trailer Hitch Mount Cargo Carrier # 6502 Fit a 2001 Honda Odyssey
  • There is an important measurement you are going to want to take prior to choosing any hitch mounted accessories. On your trailer hitch, measure from the center of the hitch pin hole straight back to the distance required to clear the rear bumper. On Class III hitches we have installed on the same generation Odyssey as yours the measurement was approximately 5 to 6 inches. For the Draw-Tite cargo carrier # 6502 it measures 13 inches from hitch pin hole to the closest part of the carrier when i
    view full answer...


Info for this part was:


Written by:
Lindsey

Edited by:
Leah

Test fit by:
Patrick

Video by:
Zack

Expert Research
Bob

Expert Research
Mike H

Expert Research
Jeff

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com