Swagman Hitch Bike Racks - S64351
Need to get into the back of your truck? No problem for this sturdy bike rack by Swagman. The folding mechanism at the base of the upright bar allows access to the rear of any vehicle, while the accommodating cradles securely keep your bikes in place.
The simple design on this original three-bike rack offers riders basic carrier functionality. Its steel construction provides lasting toughness. Kraton vinyl cushioning helps protect frames and offers additional gripping power. The top plate accommodates several different frame sizes, and turning knobs secure bikes to the arm. Keep your bikes safe by adding a couple of optional padlocks. This rack fits 1-1/4" and 2" trailer hitches.
Features:
- Carries up to 3 bikes
- Capacity with Class I hitch: 2 bikes only
- Steel construction
- Kraton vinyl cushioning helps protect frames and offers additional gripping power
- Flexible top plate accommodates several different frame sizes
- Turning knobs with top plate secure bikes to the rack
- Bikes can be locked to the rack with 1 padlock or with locking knobs (sold separately)
- Rack tilts forward to allow easy access to vehicle's rear cargo area
Specs:
- Fits 1-1/4" x 1-1/4" (Class I and Class II) and 2" x 2" trailer hitches
- 9-3/4 inches from center of pin hole to the upright bar
- Holes for optional padlocks are 5/8" in diameter
- Includes threaded pin and clip to secure the rack into the trailer hitch
- Can be locked with Swagman anti-rattle lock (S64029)
- Limited lifetime warranty
Each cradle contains grooved, kraton vinyl cushioning to offer additional gripping power and prevent bikes from sliding during transit.
64351 Swagman Original Folding 3-Bike Rack
Customers compare S64351 to these similar products
Customers Who Purchased This Hitch Bike Racks Also Bought...
Ask the Experts about this Swagman Hitch Bike Racks
Do you have a question about this Hitch Bike Racks?
- Will the Swagman Original Folding 3 Bike Rack Fit the 2008 RAV 4 with Spare Tire Mounted
- To the back of the upright from the center of the hitch pin hole the measurement is 9-3/4 inches. This rack should work fine on your 2008 Toyota Rav4. To control sway of the bike rack you could use a anti rattle device, item # 93347, on the hitch and to keep the bikes from swaying a simple tie down strap, item # EM34409, can be used.
view full answer...
- Replacement Top Plate for Swagman Bike Rack S64351
- The Replacement Top Plate, # P112 is designed for the 1999 - 2008 Swagman Original Series 3 bike racks that came with a weld nut on the bottom of the bottom plate. If your bike rack has this style of attachment the # P112 should be the correct plate for you.
If your bike rack has studs welded on the underside of the bottom plate and sticking up for a top plate and internally threaded wing nuts then the P120 top plate is the original design, but the P112 can be used, by taking out the wing bol
view full answer...
- How High Will Bicycles Sit From The Ground On Swagman Folding 3 Bike Rack on 2011 Toyota Sienna
- I walked out to our warehouse, pulled part # S64351 and assembled it. I measured the distance from the center of the hitch pin hole to the center of the lowest bar mount on the top of the bike rack and it measured 40 inches. So you will need to measure the distance from the ground to the center of the hitch pin hole, then add 40 inches to that distance, which will give you the height that the cross bar on your bicycle will be at.
While your bike is on the ground, measure down from the cente
view full answer...
- Trailer Hitch and Bike Rack Recommendations for a 2003 Toyota Avalon
- There are bike rack solutions for your 2003 Toyota Avalon but a bike rack with a 2 inch shank will not fit. In order to use a trailer hitch mounted bike rack with a 2 inch shank, you would need a trailer hitch with a 2 inch receiver. All of the hitches available for your 2003 Toyota Avalon are Class II with a 1-1/4 inch trailer hitch receiver so a 2 inch bike rack will not fit.
If your Avalon does not already have a trailer hitch, I recommend the Draw-Tite Class II Receiver # 36293. With this
view full answer...
- Locking Knob Needed to Secure the Top Plate on the Swagman Original Folding 3 Bike Rack # S64351
- If your Swagman Original Folding 3 Bike Rack, # S64351, has studs that come out of the base of the top plate and take a wing nut style knob then you will need the Replacement Locking Knob, # P1040 for 2009 and Newer bike racks, and for bike racks built from 1999 to 2008 you will need the Replacement Locking Knob, # P1009. These knobs are not interchangeable between the model years of the bike racks so you will need to determine when the bike rack was made or purchased.
If you are purchasing t
view full answer...
- Hitch and 4 Bike Rack Recommendation for a 2004 Toyota Avalon
- For a hitch I would recommend getting a Draw-Tite Hitch # 36293. This hitch is a Class II hitch that can carry a bike rack with 4 bikes on it as long as the total weight of the bikes and rack are less than the tongue weight capacity of the hitch and the capacity that is listed in your owners manual.
For a quality 4 bike rack that will not break the bank I would recommend you get a Swagman Trailhead 4 Bike Carrier # S63380. This rack tilts to give you access to the cargo area of your vehicle a
view full answer...
by: Derek05/14/2013
Installation Details
