Hitch Bike Racks > Hanging Rack > 3 Bikes > Fits 1-1/4 Inch Hitch, Fits 2 Inch Hitch, Fits 1-1/4 and 2 Inch Hitch > Frame Mount - Standard > Class 2, Class 3 > Tilting Rack > Single Arm > Bike Lock > SportRack

SportRack 3 Bike Hitch Mounted Folding Rack w Frame Mount Cradles for 1-1/4" & 2"

Rating: rating rating rating rating rating
1 reviews

Code: A30703FB

Retail:$269.47

Price:$184.66

Shipping Weight: 38 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

SportRack Three Bike Folding Hitch Bike Rack Assembly - Video
SportRack Folding 3 Hitch Bike Rack Review - Video

SportRack Hitch Bike Racks - A30703FB

Carry three bikes with this versatile bike rack. Includes padded cradles and locking knobs. Also, this rack tilts down for easy access to any cargo area and collapses for storage or when not in use.

SportRack Tilting Trailer Hitch Mounted 3 Bike Carrier

Features:

Carries up to 3 bikes
Large padded cradles individually rotate
- Accepts bikes with frames up to 2-1/4" in diameter
- Cradles have height adjustment slots to carry bikes with larger diameter frames
- Works with most alternative and larger tube frame bikes
Powder coated to resist corrosion
Bike rack tilts down allowing access to the rear of the vehicle
Top support arm also collapses for travel without bikes or for storage
Bike rack includes a locking knob to secure the bikes to the rack

Specs:

Fits 1-1/4" x 1-1/4" (Class II only) and 2" x 2" trailer hitches
Shank measures 6-1/2" or 4-1/2" from the center of the hitch pin hole to the upright bar of the rack
Weight capacity: 132 lbs.
- Maximum single bike weight is 45 lbs.
Accepts bikes with frames up to 2-1/4" in diameter
Cradle measures 6" wide
Normal hitch locks are not compatible with this bike rack due to the built-in anti-rattle device.
- Use A30901LHP hitch lock to secure the rack to the hitch.

Putting the locking cradle on the end will secure all the bikes behind it.

This bike rack can be folded back when not carrying bikes.

The shank converts to fit 1-1/4" x 1-1/4" and 2" x 2" trailer hitches.

The shank can also be folded back onto the bike rack for easy storage.

Valley # 91330

Video of SportRack 3 Bike Hitch Mounted Folding Rack w Frame Mount Cradles for 1-1/4" & 2"

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video assembly sport rack 3 bike carrier a30703fb

SportRack Three Bike Folding Hitch Bike Rack Assembly

Video review of sportrack 3 bike carrier A30703FB

SportRack Folding 3 Hitch Bike Rack Review

Video Transcript for SportRack Three Bike Folding Hitch Bike Rack Assembly

This rack as you can see comes with minimal assembly required. Basically it only has two parts that need to be attached together, a couple nuts and bolts, and some caps. This will go together for you real fast. This is how it will appear after you unpack it from your box. Before we start assembly, you have one option to choose from. You have to determine if you have a 2 inch receiver hitch, or 1-1/4 inch receiver. One of the nice features about this rack is that you can switch it over to both sizes. Well actually show you how to switch it over to the 1-1/4 inch hitch today. To convert the shank over to 1-1/4 inch, its just a simple matter of unscrewing one screw and popping off the plastic sheath around it.

Now well start the assembly of the bicycle rack by starting by inserting the shank into the receiver hitch and installing it and securing it into place with the provided threaded in hitch pin. Next step is to go ahead and install the superstructure into the shank. Starting the pin and clip first at the pivot point. Then well follow that up by installing the permanent bolts. One nice detail this sport rack provides with this bicycle rack is the nice caps for the ends of the bolts. It makes a nice finish to it, a nice detail. The last thing we need to do is basically unfold the rack in order to support the bikes. There you have it for the assembly of part # A30703FB.

Customers Who Purchased This Hitch Bike Racks Also Bought...

SportRack Anti-Rattle Bike Rack Hitch Lock $29.95

SportRack Hitch and Cable Lock - Keyed Alike $49.95

Rubber Tube Cover 1-1/4" $4.29

Swagman Easy-Out Women's and Alternative Frame Bike Adapter for Hitch Bike Racks $25.20

American Flag 2" Trailer Hitch Receiver Cover $14.95

Replacement parts available for this product

Replacement Non-Locking Knob for SportRack Hitch Mounted Bike Racks $7.99

Replacement Locking Knob for SportRack Bike Racks $14.95

Customer Reviews - Write a review about this product

SportRack 3 Bike Hitch Mounted Folding Rack w Frame Mount Cradles for 1-1/4 - A30703FB

Average Customer Rating: rating rating rating rating rating 5.0 out of 5 stars (1 Customer Reviews)

SportRack 3 Bike Hitch Mounted Folding Rack w Frame Mount Cradles for 1-1/4 - A30703FB

rating rating rating rating rating by: Tom C.03/29/2011

Is this review helpful?

This is a very sturdy rack, solidly built and easy to operate. It is quite heavy, but I find this reassuring. It might not be the best choice for a woman because of the weight. I put this on my 2001 Subaru Outback Wagon.10588

Ask the Experts about this SportRack Hitch Bike Racks
Expert Answers about SportRack 3 Bike Hitch Mounted Folding Rack w Frame Mount Cradles for 1-1/4" & 2" - A30703FB Do you have a question about this Hitch Bike Racks?

Will the Trailer Hitch Mount SportRack 3 Clear the Spare Tire on a 2009 Jeep Wrangler Unlimited
It is possible that the SportRack 3, # A30703FB will work on your 2009 Jeep Wrangler Limited. You will have to do a little measuring to be sure. Measure from the center of the hitch pin hole to the furthest point of the spare tire. If that measurement is less than 6-1/2 inches, the rack will work. I have included two videos for this rack below. The 3 bike rack with the most clearance is the SportRack Escape 3, # A30403. It measures 12-1/4 inches from the center of the hitch pin hole to the ba
view full answer...

Are Replacement Parts Available For SportRack 3 Hitch Bike Racks, # A30703FB
I do have the cradle assembly available for your SportRack 3 Hitch Bike Rack, # A30703FB. It is the SportRack Hitch Mounted Bike Rack Replacement Top and Bottom Plate Assembly, # 05-0031-000. It includes the top and the bottom assembly, but does not include the knob. The clamps are sold together as top and bottom assembly. The knob would be SportRack A3070x Hitch Mounted Bike Rack Replacement Knob, # A307KNOB, and the locking knob would be the SportRack Locking Replacement Knob, # A32017.
view full answer...

Custom Fit Trailer Hitch