See What Fits Your Vehicle
customer service | view cart  View Cart

Hitch Bike Racks > Hanging Rack > 3 Bikes > Fits 1-1/4 Inch Hitch, Fits 2 Inch Hitch, Fits 1-1/4 and 2 Inch Hitch > Frame Mount - Anti-Sway > Class 2, Class 3 > Tilt-Away Rack, Folding Rack > Steel > Bike and Hitch Lock > SportRack

SportRack Evader 3 Bike Carrier for 1-1/4" and 2" Hitches - Tilting - Hitch Mount

SportRack Hitch Bike Racks

Rating: ratingratingratingratingrating
9 reviews


Code:   A30403XT

Retail:$249.95

Price:$179.95

Shipping Weight: 30 pounds

Shipping Special
Quantity: 




SportRack Hitch Bike Racks - A30403XT

Anti-rattle, anti-sway, anti-theft - this rack avoids pretty much all things bad when it comes to carrying your bikes. Evader sports anti-sway cradles; an anti-wobble, threaded hitch pin; and locks for both the bikes and the bike rack.

Features:

  • Hitch-mounted 3-bike carrier
  • Soft rubber anti-sway cradles
    • Prevent bike-to-bike and bike-to-vehicle contact
    • Hold bikes in place without damaging paint
    • Secure bikes with rubber straps
    • Slide along arms to accommodate many types of bikes
  • Dual arms offer stability for bikes during transport
    • Arms fold down with the pull of a pin for convenient storage
    • Bike adapter bar may be required to mount some bikes on the rack
  • Upright mast tilts forward for rear-of-vehicle access
    • Release the mast by removing pin and clip from base
  • Integrated cable lock in rack arm secures bikes to carrier
  • Receiver bolt locks carrier to hitch
    • No-wobble threaded hitch pin prevents rack sway and rattle
  • Adapter sleeve enables bike rack to fit both 2" and 1-1/4" receivers


Specs:

  • Capacity: 3 bikes
  • Overall carrier length: 36"
  • Arm length: 21"
  • Measures 12-1/2" from center of hitch pin hole to back of upright bar
  • Application: 1-1/4" x 1-1/4" (Class II only) and 2" x 2" trailer hitch receivers
  • Capacity: 132 lbs
  • 1-Year limited warranty


SportRack Evader integrated cable lock

The SportRack Evader three-bike carrier offers premium anti-theft protection for a hitch mount. The rack includes an integrated cable lock that secures your bikes to the rack and stores inside the arm when not in use.

Thule Evader locking, anti-wobble threaded hitch pin

Evader includes a locking, anti-wobble, threaded hitch pin that secures the rack to your vehicle and prevents rack sway and rattle in the hitch during transport.

Thule Evader soft rubber anti-sway cradles

This rack has soft rubber anti-sway cradles that hold your bikes firmly in place without damaging the paint. The cradles slide along the dual arms to provide proper spacing and to accommodate many bike types.

Thule Evader folding arms

Simply remove a pin to fold down the dual arms for storage or to drive without bikes loaded.

Thule Evader pull pin for tilting rack

Evader tilts away from your vehicle with the pull of a pin for convenient rear-of-vehicle access without having to remove the rack.

Thule Evader adpater sleeve for 2" hitches

An included adapter sleeve fits easily over the rack shank and allows Evader to fit 2" hitches. Remove the sleeve for use with 1-1/4" (Class II only) hitches.



A30403XT SportRack Evader Hitch-Mounted 3-Bike Rack - 1-1/4" and 2" Hitches





Video of SportRack Evader 3 Bike Carrier for 1-1/4" and 2" Hitches - Tilting - Hitch Mount


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video Review Sportrack Evader Bike Rack
SportRack Evader Three Bike Hitch Bike Rack Review
Video install sportrack evader 2012 acura rdx a30403xt
SportRack Evader Hitch Bike Rack Review - 2012 Acura RDX
Video install sportrack evader3 2012 buick enclave a30403xt
SportRack Evader Hitch Bike Rack Review - 2012 Buick Enclave
Video install sportrack evader 2012 chevy malibu a30403xt
SportRack Evader Hitch Bike Rack Review - 2012 Chevrolet Malibu
Video install sportrack evader 2012 chevrolet suburban a30403xt
SportRack Evader Hitch Bike Rack Review - 2012 Chevrolet Suburban
Video install sportrack evader 2012 gmc canyon a30403xt
SportRack Evader Hitch Bike Rack Review - 2012 GMC Canyon
Video install sportrack evader 2012 toyota sienna a30403xt
SportRack Evader Hitch Bike Rack Review - 2012 Toyota Sienna

Video Transcript for SportRack Evader Three Bike Hitch Bike Rack Review

Today we are going to review part number A30403XT, the SportRack Evader three bike carrier for 1-1/4 and 2 inch hitches. This anti-rattle, anti-sway and anti-theft rack avoids pretty much all things bad when it comes to carrying your bikes. The evader sports anti-sway cradles as mentioned before, as well as an anti-wobble threaded hitch pin and locks for both the bikes and the bike rack. This is a hitch mounted rack and the adapter sleeve enables the bike rack to fit both 2 inch and 1-1/4 inch receivers. And it has soft, rubber anti-sway cradles which prevent bike-to-bike and bike-to-vehicle contact. It holds bikes in place without damaging paint and secures bikes with the rubber straps. The cradles also slide along the arms to accommodate many different types of bikes. And the dual arms offer stability for bikes during transport. The arms pull down with the pull of a pin, for convenient storage. And a bike adapter bar may be required to mount some bikes on the rack. The upright mast tilts forward to get into the back of your SUV or trunk, as needed. And the integrated cable lock in the rack arms secures the bikes to the carrier. Now, the receiver bolt comes along with just a regular anti-rattle hitch bolt and another one that also accompanies a lock that you can use to secure your rack to the vehicle itself. 1:24

We will go ahead and show you all of these features and more in greater detail as we place this bike into the rack. Now, first off I am going to show you how this switches from a 2 inch to 1-1/4 inch hitch. You will notice that there is a little cross section here. And this is actually a sleeve that goes over the 1-1/4 portion of it and simply just slides off the top like so. And now it is ready for a 1-1/4 inch application. And since we are going to be using a 2 inch hitch today, we will go ahead and put the shim back on. 1:54

Now we will go ahead and actually place it into the 2 inch hitch and show you the anti-rattle bolt. Alright, we will go ahead and set this into the hitch. Line up the holes and then we will go ahead and install our locking anti-sway bolt. One shake test and it is ready to go. And once the locking hitch pin is installed, just go ahead and take the lock and lock it into place. Next we are going to show you the tilt feature. Now, to do this there is a pin at the base of the center mast. You just pull that clip out of the other side. Pull the pin and it will come and tilt towards you. This way you can get into the back of your SUV or trunk. Next we are going to show you how the arms themselves fold down for easier storage. What happens is there is a pin that you just unsnap, pull out and then let the arms fall down. And then reinstall the pin to make sure they stay secure as you store. 3:05

Now we will go ahead and show you the cradles of the bike rack. As I have stated before, these do move front and rear. You simply maneuver them like so and they will stay in place. They also come with an anti-sway cradle, shown here, and the rubber straps which secure the bike to the actual rack. Moving forward, you see the second lock here. We have installed it and it is just a cable lock you pull out like so. You wrap it around your bikes and on the other side is the actual locking mechanism itself, or the locking pin, which you simply put on like so. And then lock it into place. Before we put the bike onto the rack, let us go ahead and undo all of the straps and get it ready. And before we install the bike, I am going to go ahead and bend the cradles down just to make the install of the bike a little bit easier. Now that we have shown off a little bit of the features here, let us go ahead and put a bike on this rack and show you how it works. And you just swing the cradles up. You can see that the groves inside the cradles here are actually housing the cables really well. Then we just strap it down. And then we put down the anti-sway cradle here. Tighten it down as well. Now your bike is secure and ready for transport. But before we go, we are going to go ahead and lock this down too, just for a little bit of added security. Pull out the cable lock like so. And depending on how many bikes you have, you wrap it around the frames of those. You bring it back and lock it on this, here. And it is secure. And to unlock it, there is the key lock there and that is how you get them off. And there you have it for part number A30403XT, the SportRack Evader bike rack.


Customers compare A30403XT to these similar products





Customers Who Purchased This Hitch Bike Racks Also Bought...



Replacement parts available for this product






Customer Reviews

SportRack Evader 3 Bike Carrier for 1-1/4 - A30403XT

Average Customer Rating:  ratingratingratingratingrating4.7 out of 5 stars   (9 Customer Reviews)




- A30403XT

ratingratingratingratingrating by: Tim08/07/2011

Is this review helpful?


Great bike rack for the price! Has all the features I wanted. Should be shipped separately from trailer hitch, box was damaged and one of the parts bags was ripped open. Luckily all the parts were there. Plenty of clearance from the spare tire for 2011 Rav4. Can actaully open the rear door over 1/2 way when the bike rack is tilted down. 21277

comment on this review


- A30403XT

ratingratingratingratingrating by: Beatriz's (husband03/16/2012

Is this review helpful?


I’m taking this time to write a review on the Sports Rack Evader 3 Bike Carrier for 1-1/4" and 2" Hitches - Tilting - Hitch Mount - A30403XT , we just received 2 hours ago. Assembly was a breeze. All parts were in the shipping box, and it arrived in a very timely manner, and is already on the 2011 Camaro SS V8. The overall bike rack, is very strong and sturdy. I was a little leery it might not keep the bike steady as I drove, because when standing beside the bike, in the rack and secured, you can shake it pretty well. Yet when you go to actually drive, you’d swear the bike was welded to the rack: only moving ever so slightly, which is necessary, if you know about that kind of thing. In the past, I had the kind of bike rack where the wheels rode in their pans, and it shook all over the place. I’d seen this kind of rack before, but always thought they wouldn’t be secure, but let me tell you, this thing is amazing. You’d never know you even have a bike behind you. Upon placing our order, we received immediate emails thanking us, and the next day another with a tracking number. I highly recommend this company and this particular rack. I give it and the company a 6.5 stars on a one to 5 star rating. Very, very pleased. 34079

comment on this review


- A30403XT

ratingratingratingratingrating by: Chelsea G.03/03/2012

Is this review helpful?


Durable and reliable. Easy to understand instructions and self assembly. 33076

comment on this review


- A30403XT

ratingratingratingratingrating by: Brian J.12/26/2011

Is this review helpful?


I am very happy with the Evader 3 bike carrier. It's easy to assemble and works well. It's great to be able to lock the rack to the car and the bikes to the rack. I use it with a 1 1/4" hitch, so can't comment on how it works with the 2" hitch adapter. As a side note, I was VERY impressed with how quickly etrailer shipped it to me. I recommend both the rack and the etrailer.28729

comment on this review


- A30403XT

ratingratingratingratingrating by: Paul P.03/15/2011

Is this review helpful?


The Sportrack Evader bike carrier is very solid and securely holds the bikes. It was straight forward to assemble and install on my Subaru Outback. The rack is solidly built and when bikes are installed on it they are very secure. The rack works well with my 2 inch Draw-Tite hitch, the rack sits close to the hatch when upright but folds away nicely so that the hatch can open. Order processing and shipping from etrailer was lighting fast. 9379

comment on this review


- A30403XT

ratingratingratingratingrating by: Dennis C in Ohio02/22/2011

Is this review helpful?


The Sportrack Evader bike carrier is very well made. Installed on a Volvo XC90, the carrier easily clears the hatch when tilted away. The verticle bars fold down and lock in place easily to allow the carrier to stay on the vehicle when not holding a bike. The anti-sway cradles and rubber straps grip the bike firmly without marring the finish. I use the carrier to transport 2 Giant touring bikes, with room for a third. 7628

comment on this review


- A30403XT

ratingratingratingratingrating by: Sam Jackson05/16/2012

Is this review helpful?


like the rack. would like a better way to attach instead of with bolt and nut40636

comment on this review


- A30403XT

ratingratingratingratingrating by: tom01/11/2012

Is this review helpful?


Really good. Quick delivery. 29504

comment on this review


- A30403XT

ratingratingratingratingrating by: steve06/30/2011

Is this review helpful?


its ok not has good has they make it out to be18336

comment on this review


Ask the Experts about this SportRack Hitch Bike Racks
Expert Answers about SportRack Evader 3 Bike Carrier for 1-1/4" and 2" Hitches - Tilting - Hitch Mount - A30403XT                                          Do you have a question about this Hitch Bike Racks?


  • What is the Difference Between SportRack Escape 3 # A30403 and Evader3 A30403XT
  • The A30403XT has an integrated cable lock built into the arms of the carrier to secure the bikes to the carrier. The A30403XT also includes a locking anti-rattle hitch pin, where as part # A30403 includes an anti-rattle hitch pin with a lock sold separately.
    view full answer...

  • Comparing and Contrasting the Thule Helium and SportRack Evader 3 Bike Racks
  • I went out to the warehouse and pulled one of each of the bike racks, assembled them, and measured. On the Thule Helium 2 Bike Carrier, # TH970XT measures 36 inches from the center of the hitch pin hole to the end of the arms when in the out position. With the arms folded down, it is 16-1/4 inches. The SportRack Evader 3, # A30403XT, measures 29-1/4 inches from the center of the hitch pin hole to the end of the arms in the out position. With the arms folded down, it is 14-3/4 inches. Havin
    view full answer...

  • Can the Bike Cradles be Removed from the SportRack Evader 3 Bike Rack # A30403XT
  • Yes, the bike cradles can be removed completely or positioned at any point along the arms of the SportRack Evader 3 Bike Carrier for 1-1/4 inch and 2 inch Hitches - Tilting - Hitch Mount, item # A30403XT. To remove one set of the cradles you will need to remove the end caps from the end of each arm. There is a small set screw that holds the end cap in place under each arm. Once the end caps are removed you will have to slide the cradles off the end of the arms. A small amount of soapy water o
    view full answer...

  • Will The SportRack Evader 3 Bike Carrier # A30403XT Fit My Toyota FJ Cruiser
  • To determine if you will have clearance from the spare tire to the bike rack on your Toyota FJ Cruiser you will need to take a measurement. You will need to measure from the center of the hitch pin hole straight out to the farthest edge of the spare tire. If this measurement is less than 12 inches, you will be able to mount to the SportRack Evader 3 Bike Carrier # A30403XT. The Evader measures 12 inches from the center of the hitch pin hole to the upright bar. The SportRack Evader 3 Bike Carr
    view full answer...

  • Comparing the Sportrack 3 Bike Rack # A30403XT and Swagman XP 3 Rack # S64950
  • All things considered the I believe the Sportrack 3 Bike Rack # A30403XT has the advantage because of its ability to be folded up for storage. However, there are a few differences between these racks. The Sportrack model has a higher capacity at 132 pounds/45 per bike. The Swagman is at 120 pounds. The Swagman also has a distance of 11 inches from the center of the hitch pin out to the nearest upright bar of the rack while the Sportrack has a distance of 12-1/2 inches. I also attached inst
    view full answer...

  • Trailer Hitch, Bike Rack and Roof Rack Recommendation for a 2012 Mazda 3 Carrying 3 Bikes
  • I would recommend going with the Draw-Tite Class I Sportframe Trailer Hitch, # 24843, for your 2012 Mazda 3 Hatchback without LED taillights. This hitch can carry any bike rack that is designed for use in a Class I hitch and would allow you to tow a small trailer, should your needs change in the future. With a Class I hitch you will be limited to 2 bikes because the weight of the 3rd bike that for out from the rear of the vehicle will allow too much torque to be applied to the hitch, much li
    view full answer...

  • Can 3 Bikes Be Used on a Class I Hitch if the Weight is Less than the Tongue Weight Rating of Hitch
  • As long as you do not exceed the tongue weight capacity listed by the hitch manufacturer, the tongue weight capacity listed in the owners manual of your 2010 Infiniti EX35, and never put more than two bikes on the rack you would be fine. The reason you could not put three bikes on this rack even if the total weight was less than the tongue weight capacity is because of the distance of the weight of the third bike away from the hitch opening. The further the weight is away from the hitch the m
    view full answer...


Info for this part was:


Written by:
Ty

Edited by:
Fran

Test fit by:
Rick

Test fit by:
Matt

Video by:
Zack

Video by:
AJ

Expert Research
Bob

Expert Research
Mike H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com