See What Fits Your Vehicle
customer service | view cart  View Cart

Hitch Accessories > Hitch Adapter > Hitch Expander > Fits 1-1/4 Inch Hitch > 1-1/4 Inch to 2 Inch > 7-1/4 Inch Long > Steel > Brophy

Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver

Brophy Hitch Accessories

Rating: ratingratingratingratingrating
60 reviews


Code:   HTAD

Price:$49.95

Shipping Weight: 7 pounds

Shipping Special
Quantity: 




Brophy Hitch Accessories - HTAD

Need to put a 2" bike rack or cargo carrier in your 1 1/4" hitch receiver? No worries. Simply insert this adapter and off you go. It cannot get any easier to use and is certainly less expensive than buying another hitch!

Features:

  • Convert any 1-1/4" (Class I and II) receiver to a 2" receiver (not to be used for towing or with snow plows)
  • 1-1/4" shank is solid
  • 2" shank is hollow
  • Has powder coated black finish


Specs:

  • Capacity: 300 lbs tongue weight
    • Note: Tongue weight capacity of hitch will be reduced by 50% with use of adapter
  • Measures 7-1/4" from pin hole to pin hole
  • Hitch accessory (bike rack, etc.) cannot be more than 3-3/8" long from the center of the hitch pin hole to the end of the shank (part that slides into the hitch)
  • Requires hitch pins and clips (sold separately)
    • Requires 5/8" pin for 2" receiver (PC3)
    • Requires 1/2" pin for 1-1/4" receiver (PC2)







Video of Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video review of hitch adapter HTAD
Brophy Trailer Hitch Adapter Review

Video Transcript for Brophy Trailer Hitch Adapter Review

This product converts your 1 1/4 inch receiver hitch up to a 2 inch receiver hitch for certain applications such as cargo carriers or bike racks. Well show you how it gets installed on the hitch, its pretty simple. It just plugs in like so, install your pin and clip and youre good to go. A couple of things you want to take note of, the adapter itself is rated at 350 pounds of tongue weight. However, when its plugged into your hitch you want to limit your hitch to about 175 pounds tongue weight. Basically it cuts it in half. So if you have 350 pounds of tongue weight originally, with this adapter its going to cut it in half to about 175 pounds of tongue weight to deal with. Typical applications of this are bike racks, two inch cargo carriers will work on this, however you want to be careful how much weight you put on there. That pretty much covers it for part number HTAD, the 1 1/4 inch to 2 inch adapter bar.


Customers compare HTAD to these similar products





Customers Who Purchased This Hitch Accessories Also Bought...






Customer Reviews

Hitch Adapter 1-1/4 - HTAD

Average Customer Rating:  ratingratingratingratingrating4.6 out of 5 stars   (60 Customer Reviews)




- HTAD

ratingratingratingratingrating by: T Zimmerman01/10/2012

Is this review helpful?


Product was of excelent quality and exactly as described. The good dimensional infomation on eTrailer was most helpful in determining whether this product would work for me. Because of the excellent engineering info on eTrailer, I was able to determine the loading that I will able to carry and I learned a lot about the different class hitches and their ratings which was most helpful. Product arrived very quickly. I am using this product with a bike rack on my 1-1/4" car hitch. Great website and great service. What could be better. I would buy here again. Thanks eTrailer!!29471

comment on this review


- HTAD

ratingratingratingratingrating by: Rick T02/28/2011

Is this review helpful?


Great, strong quality, but I wish it wasn't so long. My deer hauling hitch tray now hangs a foot off/away from the back of my little 2 door hatchback and with only 4"-6" of ground clearance. Really looks like an odd set-up. I should have measured better before ordering; now will have to only shoot small deer to haul.:-)8104

comment on this review


- HTAD

ratingratingratingratingrating by: James02/20/2013

Is this review helpful?


Product was exactly what I needed and to tell the truth, was quite a bit more heavy duty that I had envisioned. I am very enthusiastic and extremely satisfied with the operation of the company and the product.67056

comment on this review


- HTAD

ratingratingratingratingrating by: Norbert02/05/2013

Is this review helpful?


Not the most elegant workmanship but sturdy and functional for its intended purpose to support a hitch bike rack. Service was excellent as product was at my doorstep within 3 days of order with regular shipping.65098

comment on this review


- HTAD

ratingratingratingratingrating by: Phil W08/31/2012

Is this review helpful?


Description was perfect on website. I spent hours running around to Home Depot, Menards, Walmart, Ace and all I could find was a hitch adaptor with a hole 3 and 1/4 when I needed 3 and 3/8. I had no idea that there would be a company that was on the internet that sold specialized adaptors. This was handy because the original bike rack I was trying to attach isn't made anymore. Also, the bike rack manufacturer apparently didn't want to have its 2 inch opening reduced to 1 and a 1/4 because of the weight limits for the rack. Your site explains that the weight for the rack should be adjusted for this change, so all is good.53692

comment on this review


- HTAD

ratingratingratingratingrating by: Ken P.02/02/2012

Is this review helpful?


easy to find and order, good product, good price, thanks30843

comment on this review


- HTAD

ratingratingratingratingrating by: Richard05/26/2011

Is this review helpful?


Just what I needed to make the bike rack fit the small car15489

comment on this review


- HTAD

ratingratingratingratingrating by: Dave L.01/27/2011

Is this review helpful?


Nice product. Solves my need, Speedy Delivery, All Good!6216

comment on this review


- HTAD

ratingratingratingratingrating by: STN08/14/2008

Is this review helpful?


Solid piece This works great for a bike rack adaptation... helps to extend the bike rack from the hatch even.1174

comment on this review


- HTAD

ratingratingratingratingrating by: Chucks.05/08/2013

Is this review helpful?


Does the job, but overpriced. 79499

comment on this review


- HTAD

ratingratingratingratingrating by: ar15gator04/21/2013

Is this review helpful?


Nice USA made hitch adapter. Highly Recommend adapter, and etrailer77136

comment on this review


- HTAD

ratingratingratingratingrating by: Mike04/08/2013

Is this review helpful?


Perfect. I was afraid I was going to have to buy a new bike carrier but this works perfectly. Go etrailer.com!!!74745

comment on this review


- HTAD

ratingratingratingratingrating by: Joseph03/08/2013

Is this review helpful?


I am very pleased with the Hitch Adapter that I just received from etrailer.com. It is exactly as pictured online and well made. I have already installed it on my car. Until I went on your website I was not even aware that this item existed. It solved a problem for me to be able add an accessory to my car hitch that I needed. I also appreciate the timely manner that it was delivered. 69735

comment on this review


- HTAD

ratingratingratingratingrating by: Dennis R.01/30/2013

Is this review helpful?


This hitch adapter is of very high quality and etrailer.com service gets a 5 star rating from me because they kept me informed of my order status right up to it's delivery. I really recommend this site!64551

comment on this review


- HTAD

ratingratingratingratingrating by: Jose L.01/13/2013

Is this review helpful?


Have used the converter and it works we ll.62847

comment on this review


- HTAD

ratingratingratingratingrating by: Melissa01/13/2013

Is this review helpful?


Just what we needed--and extremely fast shipping. 62825

comment on this review


- HTAD

ratingratingratingratingrating by: Ian H12/26/2012

Is this review helpful?


This thing is very nice! American made with nice fiancé and nice welds! Definitely recommend. 61927

comment on this review


- HTAD

ratingratingratingratingrating by: W.A.Beaver12/10/2012

Is this review helpful?


It is what I ordered. Thank you. I have sent photos previously. I thought I was going to get Free Shipping as per your flashing banner. Did not. Bill Beaver61084

comment on this review


- HTAD

ratingratingratingratingrating by: Rocky L.11/16/2012

Is this review helpful?


Received every thing on Wednesday by 6:00 Pm and installed all on Thursday morning in about 1 hour awesome product and shipping!59544

comment on this review


- HTAD

ratingratingratingratingrating by: Dennis S.11/15/2012

Is this review helpful?


The adapter fit perfectly with the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" which I also purchased from etrailer. There was no need to scrape paint or grind metal to make it fit.The customer service from etrailer was excellent.59468

comment on this review


- HTAD

ratingratingratingratingrating by: Jonathan F.10/18/2012

Is this review helpful?


Solid product from a great company. 100% satisfied all around. Fast shipping!57543

comment on this review


- HTAD

ratingratingratingratingrating by: John Mackey Jr09/18/2012

Is this review helpful?


Works great! 55060

comment on this review


- HTAD

ratingratingratingratingrating by: Charles08/31/2012

Is this review helpful?


The product fits great and shipped fast! This allowed me to fit a cargo carrier to my vehicle. I will continue to purchase from etrailer as they have provided great products and services everytime.53676

comment on this review


- HTAD

ratingratingratingratingrating by: BILL Y08/27/2012

Is this review helpful?


SOLID PIECE OF STEEL! 53215

comment on this review


- HTAD

ratingratingratingratingrating by: Jon K.08/05/2012

Is this review helpful?


I recieved the product in a very timely manner. It was exactly as described and well constructed. I recommend eTrailer and this brand of product. Jon50585

comment on this review


- HTAD

ratingratingratingratingrating by: Michael C.08/02/2012

Is this review helpful?


It’s a tight fit on the 1-1/4" side. I had to scrape off some paint, but it works just as advertised. This adapter lets me use my carrier on bike rack on a small car hitch.50336

comment on this review


- HTAD

ratingratingratingratingrating by: Alan07/10/2012

Is this review helpful?


Arrived quickly. Fit perfectly. Very STURDY piece. The pin and clip were easy to use. This adapter should enable me to use my 2 inch diameter bike rack (which had plenty of life left in it) on the 1 1/4 inch Class I hitch that came with our new car. The seller kept me apprised of the progress of my order and delivery details. Exemplary transaction all around.47436

comment on this review


- HTAD

ratingratingratingratingrating by: geoff07/05/2012

Is this review helpful?


not too expensive but some play in the attachment to the 1 1/4 sixde46827

comment on this review


- HTAD

ratingratingratingratingrating by: Bill G.06/29/2012

Is this review helpful?


Does what it says and fits perfectly. 46145

comment on this review


- HTAD

ratingratingratingratingrating by: Felix06/22/2012

Is this review helpful?


Strong holds great and looks great. 45315

comment on this review


- HTAD

ratingratingratingratingrating by: Jon P06/09/2012

Is this review helpful?


The hole in the hitch adapter was not centered and I had to drill out the hole in the trailer hitch (about 1/16th) to get the pin inserted. It took about an hour to get right. I'm not very happy with your QA department.43456

comment on this review


- HTAD

ratingratingratingratingrating by: John McK05/27/2012

Is this review helpful?


Bought this for conversion of 1-1/4" hitch to accomadate my bike rack. Extemely easy to use and very happy with purchase and rapid delivery.41791

comment on this review


- HTAD

ratingratingratingratingrating by: Ron C.05/26/2012

Is this review helpful?


This adapter worked great. However it was etrailers customer service that really made the online site win me as a loyal customer.I need this delivered in 2 days for a upcoming trip and despite a late in the day order their Team was able to get it shipped so I could receive it in 2 business days! They were reachable by phone and asisted professionally. Hats off to etrailers!41751

comment on this review


- HTAD

ratingratingratingratingrating by: Rocco B04/19/2012

Is this review helpful?


Good price. 37721

comment on this review


- HTAD

ratingratingratingratingrating by: Brad04/14/2012

Is this review helpful?


Works to adapt my daughters 1-1/4" reciever to a 2" reciever for her bike rack installation on her Corolla. Works well but is pricey for no more than it is.37237

comment on this review


- HTAD

ratingratingratingratingrating by: John R DeBow04/13/2012

Is this review helpful?


Just as advisertised fast shipping THANKS37081

comment on this review


- HTAD

ratingratingratingratingrating by: Brian S.04/01/2012

Is this review helpful?


Product seems to fit and work well. I was worried about the amount of play between the two hitch but the adapter fit very snug with almost no play.35831

comment on this review


- HTAD

ratingratingratingratingrating by: Jerry Schimelfening03/29/2012

Is this review helpful?


This looks to be a very well made part. I received it sooner than they said so I was pleasantly surprised. I will definitly use them again.35508

comment on this review


- HTAD

ratingratingratingratingrating by: dp03/29/2012

Is this review helpful?


Seems to be a solid product for our purposes. We already had a 2" receiver type bike carrier, but the wife's car can only handle a 1-1/4" hitch. This adapter saved us a good chunk of money on a new bike carrier. It slid in a little tight on the first go, but nothing a little grease couldn't solve. Highly recommended for this type duty. Oh yeah, etrailer.com had what we needed in stock (hitch for a 2010 Malibu LTZ & this adapter) and shipped immediately. Their tracking software was slick, best I've seen. 35463

comment on this review


- HTAD

ratingratingratingratingrating by: Albert C.03/21/2012

Is this review helpful?


Exactly what I needed; fits perfectly. 34628

comment on this review


- HTAD

ratingratingratingratingrating by: Mark M.12/03/2011

Is this review helpful?


Excellent product -- very good fit and finish.27638

comment on this review


- HTAD

ratingratingratingratingrating by: Colorado09/12/2011

Is this review helpful?


WARNING: Does not fit a standard 1-1/4 hitch reciever... at least not without grinding the paint off. It appears the manufacturer cast it to the correct size, then painted it which added just enough so it will not fit. Pulling out the grinder this weekend to resolve the problem. Otherwise seems to be of sturdy construction.23811

comment on this review


- HTAD

ratingratingratingratingrating by: Dimitri08/24/2011

Is this review helpful?


Excellent product and fast free shippin g!22628

comment on this review


- HTAD

ratingratingratingratingrating by: Bob H.08/19/2011

Is this review helpful?


Does what's advertised! 22293

comment on this review


- HTAD

ratingratingratingratingrating by: Jim G08/17/2011

Is this review helpful?


Handy attachement for the bike rack. 22018

comment on this review


- HTAD

ratingratingratingratingrating by: Brandon Sturgis07/23/2011

Is this review helpful?


Product is exactly what I need. Packaging for shipment could use a substantial improvement.20022

comment on this review


- HTAD

ratingratingratingratingrating by: Rich Burgess07/08/2011

Is this review helpful?


Everything was delivered as pictured, service was fast and received in 5 days. This is going to be used for a bike carrier. Bike Carriers are more common in the 2", class IV (4) size that the Class III size of 1:1/4. I would use e-trailer again without question. Thanks for ordering so simple. 18958

comment on this review


- HTAD

ratingratingratingratingrating by: Darren M04/12/2011

Is this review helpful?


This product is built with great quality. I look forward to years of service from it.11559

comment on this review


- HTAD

ratingratingratingratingrating by: Jim Broadhurst03/15/2011

Is this review helpful?


Sturdy and does it's job well. 9370

comment on this review


- HTAD

ratingratingratingratingrating by: Dennis02/06/2011

Is this review helpful?


Good fit. 6708

comment on this review


- HTAD

ratingratingratingratingrating by: Paul H.03/16/2012

Is this review helpful?


Everything arrived in good order. The person who assembled it said the instructions were very clear.34138

comment on this review


- HTAD

ratingratingratingratingrating by: Mick N.01/19/2012

Is this review helpful?


Very good fit, I will use this company again. Great communication on order status.29910

comment on this review


- HTAD

ratingratingratingratingrating by: Nick F.07/06/2011

Is this review helpful?


Great finish and fit. Had ordered a Curt hitch for my truck in the past and is why I choose Curt again.18564

comment on this review


- HTAD

ratingratingratingratingrating by: Ronald M06/18/2011

Is this review helpful?


Great product, and right on time. The only thing I forgot was the pin to secure it in. I forgot it is shorter. It goes on my Polaris side by side to hold a bike rack while it is on a trailer. Works great. 17237

comment on this review


- HTAD

ratingratingratingratingrating by: Ken K06/07/2011

Is this review helpful?


Great for bumper racks. 16294

comment on this review


- HTAD

ratingratingratingratingrating by: OL'DUDE04/04/2011

Is this review helpful?


SOLID , I COULD HAVE SAVE A FEW BUCKS AT H--- F---- BUT IT WAS A WELDED UP JUNKY LOOKIN' THING . THIS ONE WAS DONE RIGHT .11052

comment on this review


- HTAD

ratingratingratingratingrating by: Alan L04/04/2011

Is this review helpful?


Bright for a 1 1/4 hitch on my Fiesta to put my 2 inch bike rack on the car. Solid constructions works as advertised. But.... The adapter does not fit tight in the hitch so the bike rack shakes a bit. I am looking for a locking, anti-rattle solution for it.11048

comment on this review


- HTAD

ratingratingratingratingrating by: gil john03/29/2011

Is this review helpful?


High quaility at a great price with super fast shipping. Will buy from again and tell all my friends where to buy hitch supplies etc.10646

comment on this review


- HTAD

ratingratingratingratingrating by: Tom G.03/25/2011

Is this review helpful?


great product - shipping was super fast 10405

comment on this review


- HTAD

ratingratingratingratingrating by: Bob K01/29/2011

Is this review helpful?


Easy to select, purchase and install. Fast shipping.6364

comment on this review


Ask the Experts about this Brophy Hitch Accessories
Expert Answers about Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver - HTAD                                              Do you have a question about this Hitch Accessories?


  • How Can I use a 2 Inch Bike Rack on 2008 Jetta with a 1-1/4 Inch Class I Hitch
  • We offer 1-1/4 inch to 2 inch hitch adapter, part # HTAD. However, using any adapter will lower the tongue weight capacity of your hitch by half. When using this adapter, you will only be able to carry 100lbs on the hitch, including the weight of the bike rack, the bikes you are carrying, and also anything in the trunk or cargo area of your vehicle. The best way to use your hitch at its full carrying potential would be to use a bike rack that is specifically designed to work with a class I h
    view full answer...

  • Hitch Adapter 1-1/4 Inch to 2 Inch
  • The 1-1/4 to 2 Inch Hitch Adapter, part # HTAD offers 7-1/4 inches of extension. Please note that when using the adapter, the tongue weight capacity of your hitch will be lowered by 50 percent.
    view full answer...

  • Class II Ball Mount With 3-1/2 Inch To 5 Inch Drop For Ford Explorer
  • For a 1-1/4 inch hitch receiver on your Ford Explorer, we have two ball mounts that fall within the 3-1/2 to 5 inch drop range. The first one is the Draw-Tite Class II Ball Mount, part # 36078. This ball mount has a 4-3/4 inch drop and measures 7-1/2 inches from the center of the hitch pin hole to the center of the ball mount hole. It has a tongue weight rating of 300 pounds and a towing weight capacity of 3500 pounds. The pin and clip are included with this ball mount. The second ball mount
    view full answer...

  • Inside depth of the 2 Inch Portion of the Hitch Adapter 1-1/4 inch to 2 inch, item # HTAD
  • The depth from the center of the hitch pin hole in the 2 inch receiver portion of the Hitch Adapter 1-1/4 inch to 2 inch, item # HTAD, is 3-3/8 inches.
    view full answer...

  • Can I use Hitch Adapter Part # HTAD to Use a Class 3 Scooter Carrier on my 1995 Ford Taurus
  • You can use an adapter like part # HTAD, but it will reduce your hitch capacity by 50 percent. Your hitch should have a tongue weight capacity of 350 pounds, using this adapter would reduce the hitch capacity to 175 pounds. This means that the combined weight of the scooter and carrier must be 175 pounds or less. All of the 2 inch carriers we have are 80 pounds or more. We do carry a Scooter carrier for Class II 1-1/4 inch hitches. It is part # RHWC1114, and using this carrier would not reduc
    view full answer...

  • Eliminating Receiver Rattle on 2006 Ford Explorer Using 1-1/4 Inch to 2 Inch Receiver Adapter
  • The No-Rattle Trailer Hitch Wedge, part # 93347 will likely reduce buy not eliminate the movement you are experiencing. Keep in mind that using the adapter will lower the tongue weight capacity of your factory hitch by 50%. If the tongue weight capacity of your hitch is 350 lbs, using the adapter will lower it to 175 lbs. This means that the hitch will only be able to withstand 175 lbs of downward force. My best recommendation for maximum safety would be to install an aftermarket hitch wit
    view full answer...

  • What is the Gross Towing Weight and Tongue Weight Capacity of the Brophy 1-1/4 to 2 Inch Adapter
  • The towing and tongue weight capacities of the Brophy 1-1/4 to 2 Inch Adapter are dependent on the hitch itself. Find the tongue weight capacity and the towing capacity of your hitch. Once you find the capacities of the hitch, reduce them by 50 percent and that will give you the weight capacities when using this adapter. Check the owner manual of your vehicle. If the tongue weight or towing weight capacity listed in the owner manual is less than the hitch, you must take 50 percent of figu
    view full answer...

  • Curt Spare Tire Carrier Rattles and Jumps with 1-1/4 Inch to 2 Inch Adapter
  • I assume you are referring the Curt Spare Tire Carrier, part # C31006 and one of the Class I hitches you purchased from us. Both of those hitches have a 200 pound tongue weight capacity. However, if you are using the HTAD adapter, the tongue weight capacity is reduced by 50 percent to 100 pounds. Now, the carrier weighs 16 pounds and you said your tire and rim weigh a combined 71 pounds. That gives you a total tongue weight load of 87 pounds, still under your 100 pound limit. What you are he
    view full answer...

  • Distance from Center of Hitch Pin Hole to Back of 2 Inch Portion of Hitch Adapter # HTAD
  • You are correct. The distance from the center of the hitch pin hole on the Adapter # HTAD, to the 2 inch to 1-1/4 inch transition point is 3-3/8 inches. On your bike rack, it the distance from the center of the hitch pin hole to end of the shank is 3-1/8 inches, you will have 1/2 inch to spare and the bike rack will fit. I have included a link to a video review of this adapter below. I must also mention that the use of this adapter will reduce the tongue weight capacity of the trailer hitch
    view full answer...

  • Is it Safe to Use a Trailer Hitch Adapter # HTAD on a Class I Trailer Hitch on a 2010 Kia Soul
  • It really depends on what you want to use the hitch for if you need an adapter. The trouble is that using an adapter like # HTAD or another adapter will reduce the tongue weight capacity of the hitch by 50 percent. The hitches for your 2010 Kia Soul are all class I hitches with a tongue weight capacity of 200 pounds. Using an adapter will cut that down to 100 pounds. If you are wanting to use a bike rack or cargo carrier, you will be limited to carrying just 2 bikes and the combined weight of
    view full answer...

  • Needing Receiver Adapter to Lower Cargo Carrier by 7 Inches
  • So you are looking for an adapter that would lower the 2 inch receiver so that the aluminum cargo carrier can be lowered by 7 inches, is that correct? We carry some Hi-Lo adapters, but they are only for flat towing a vehicle and are not intended to have any weight applied to them. The only item I have that might work for you would be the Curt Multi-Purpose ball mount, part # D210. When this is used in the drop position, it would lower your cargo carrier by 6-3/4 inches. Keep in mind that the
    view full answer...


Info for this part was:


Written by:
Lindsey

Edited by:
Leah

Test fit by:
Rick

Video by:
Zack

Expert Research
Bob

Expert Research
Mike H

Expert Research
Jeff

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com