Select Your Vehicle
view cartView Cart

Gooseneck and Fifth Wheel Adapters > Adapts Fifth Wheel Rails > Fifth Wheel Rails to Gooseneck Trailer > Adapts Truck > Offset Ball > 25000 lbs GTW > Husky

Husky Gooseneck Hitch for Fifth Wheel Rails - 25,000 lbs

Husky Gooseneck and Fifth Wheel Adapters

ratingratingratingratingrating (12 reviews)

Code:   HT31368



Shipping Special

Shipping Weight: 46 pounds


Husky Gooseneck and Fifth Wheel Adapters - HT31368

Gooseneck ball designed to attach to above-the-bed fifth wheel rails. 2-5/16" ball.


  • Plate with 2-5/16" diameter ball sits in the slots in your above-bed fifth wheel rails to allow you to tow a gooseneck trailer
  • Easily mounts to above-the-bed fifth wheel rails (sold separately)
    • Fits Curt, Draw-Tite, Hidden Hitch, Reese, Valley and Husky brand rails
    • Easy installation and removal with pins and clips
    • Allows full access to truck bed when removed
  • Durable, powder coat, black paint finish
  • Safety chain attachments built in
    • Note: some states require safety chains to be attached to a separate connection point than to the hitch


  • 2-5/16" ball diameter
    • Gooseneck ball is offset 3" from center of plate
  • Plate dimensions: 24" long x 13-1/4" wide
  • 25,000 lbs GTW
  • Tongue weight capacity: 6,250 lbs
  • 5-Year limited warranty

Mounting Tab Measurements:

  • Tab measures 15/32" x 1-1/2"
  • Distance on center between the tabs, left to right: 10"
  • Distance between the tabs front to back (opposite rails): 21-15/32"
  • Distance from outside to outside of the tabs front to back (opposite rails): 22-13/32"

31368 Husky Gooseneck Hitch for Fifth Wheel Rails

Video of Husky Gooseneck Hitch for Fifth Wheel Rails - 25,000 lbs

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video Demo Husky Gooseneck HT31368
Husky Gooseneck HT31368 Review

Video Transcript for Husky Gooseneck HT31368 Review

Today we're going to review part number HT31368, this is the Husky Fixed Ball Platform Gooseneck Hitch, for the fifth-wheel rails. It has a 25,000 lbs capacity, and the part that we'll be demonstrating today is this part right here. The platform that's made to fit into the rails. For demonstration purposes, I do have a stand here with a set of above-bed fixed rails attached to it. These would be the rails like would be in your truckbed. Basically, this platform plate with this 2-5/16ths diameter ball will sit in the slots in these above-bed rails to allow you to tow a gooseneck trailer. These will easily mount to the above-bed rails that we sell separately.

The standard rails it fits, would be the Curt, the Draw-Tite, the Hidden Hitch, the Reese, the Valley and the Husky brand rails. It's a very easy installation and removal, using these pins and clips and the other mounting hardware is all included. Basically this will drop in, you could use the pins to lock into place, when you're done towing you can remove the pins, remove the plate and then you'll still have full access to your truck bed when it is removed. This part is a durable powder-coat black paint finish. If you'll notice these holes here right in the plate, these can be used as the safety chain attachments for your trailer. Now just a note, there are some states that do require the safety chains of your trailer to be attached to a separate connection point than to the hitch - so you do want to check your local laws to see if that pertains to you. This does have a 2-5/16ths ball diameter, and again the gross towing weight capacity is 25,000 lbs, the tongue weight capacity on this platform is 6250 lbs. The measurement on this plate, the overall width, 13 , overall length is 24 inches.

The measurements between these tabs, center to center is going to be 10 inches, which is usually a standard measurement. Then from the front tab to the back tab, center to center is 22 inches again, which is a standard measurement, so it will fit all those rails I mentioned earlier. One other thing I do want to show you also if you look at this - it weighs about 30 lbs - but if you look at that ball, this is an offset platform, and the reason they say that is, if you look at the ball it's about 3 inches from the center offset. The reason they do that is if you're going to use it for, for instance if I'm the cab up here and back here is the tailgate. So if you're going to put the ball closer to the cab - in the case of maybe a long-bed truck - you can drop it so that it's positioned like this, drop it right into the tabs. Now if there's a case where you have a short-bed truck and you want gain some clearance from that cab, you can actually rotate this plate, just like that, and as you notice the ball is now moved closer to the tailgate.

Then you can just drop it into the tabs, just like that, take your pin, run your pin through the bottom, just like that. Then put your clip right on the end in all four places and it would lock it into place. Simple as that. That should do it for the review on part number, HT31368, Husky Fixed Ball Platform Gooseneck Hitch, for the fifth-wheel rails. .

Customer Reviews

Husky Gooseneck Hitch for Fifth Wheel Rails - 25,000 lbs - HT31368

Average Customer Rating:  ratingratingratingratingrating4.8 out of 5 stars   (12 Customer Reviews)

- HT31368

ratingratingratingratingrating by: RICHARD B11/22/2013

Is this review helpful?


- HT31368

ratingratingratingratingrating by: John C.11/08/2013

Is this review helpful?

received the hitch in just 2 days, and with just standard shipping. Fits good, no problems. easy to remove and switch back to 5th wheel if needed. very happy with the gooseneck hitch.106807

- HT31368

ratingratingratingratingrating by: Mike B08/27/2013

Is this review helpful?

My package arrived at my door early and contained everything the customer rep told me I would be getting and I'm very satisfied with the product thanks again!97246

- HT31368

ratingratingratingratingrating by: LARRY DIMMICH05/05/2013

Is this review helpful?

VERY GOOD!! 79063

- HT31368

ratingratingratingratingrating by: Jerry02/06/2013

Is this review helpful?

Very happy Thank You 65220

- HT31368

ratingratingratingratingrating by: Michael01/28/2013

Is this review helpful?

My product came quick and everything was good!64350

- HT31368

ratingratingratingratingrating by: LINDSEY B.04/17/2014

Is this review helpful?


- HT31368

ratingratingratingratingrating by: Mike R.03/28/2014

Is this review helpful?

Product was installed and great fit! Has not been put in use yet so cannot comment on usage, but appears will work as intended. Thank you.122626

- HT31368

ratingratingratingratingrating by: shawn02/25/2014

Is this review helpful?

This product is well built and the price was half price of every other companies. This was a great experience 117696

- HT31368

ratingratingratingratingrating by: Tom Caldwell01/20/2014

Is this review helpful?

Great product, Very happy, wish I would have thought about it114263

- HT31368

ratingratingratingratingrating by: LutherC01/08/2014

Is this review helpful?

Great! Easy to install. It looks great in my Ford F250 truck. Great choice. Looks just like the pictures.112257

- HT31368

ratingratingratingratingrating by: Justin05/21/2013

Is this review helpful?

Perfect fit. Exactly as described and fast shipping81350

Ask the Experts about this Husky Gooseneck and Fifth Wheel Adapters
Expert Answers about Husky Gooseneck Hitch for Fifth Wheel Rails - 25,000 lbs - HT31368                                           Do you have a question about this Gooseneck and Fifth Wheel Adapters?

  • What is the Offset of the Gooseneck Ball on Husky 25K Gooseneck Hitch # HT31368 for 5th Wheel Rails
  • The Husky 25K Gooseneck Hitch # HT31368 for 5th Wheel Rails measures 24-inches long x 13-1/4-inches wide and the ball is offset from the center line by 3-inches. The Curt Spyder # 16085 has a centered hitch ball with no offset. We also offer a comparable item from ProSeries, with the same weight ratings as the Husky, but with one additional inch of offset - 4 inches rather than 3 inches. This is Pro Series part # 49080. The base on the ProSeries measures 12-1/4-inches wide x 25-inches long.
    view full answer...

Info for this part was:

Photos by:
Theodore B

Updated by:
Adele M

Expert Research:
Adam R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Subscribe to email newsletter


privacy - we don't send unsolicited email

Only 2 Hours 36 Minutes Remaining reviews

All images, layout and content copyright