Draw-Tite 25K Gooseneck Trailer Hitch

Draw-Tite Gooseneck - 6002

25K Gooseneck Trailer Hitch by Draw-Tite and Reese

• 25,000 lb. capacity
• Mounts to Fifth Wheel Rails
  • Fits Curt, Draw-Tite, Hidden Hitch, Reese and Valley brand rails
• Easy installation and removal with pins and clips
  • Allows full access to truck bed
• Durable powder coat, black paint finish
• 2-5/16" heat treated ball

Tab Measurements:

• Tab measures 15/32" x 1-1/2"
• Distance between the tabs left to right (same rail): 8-1/2"
• Distance from outside to outside of the tabs left to right (same rail): 11-1/2"
• Distance from center of one tab to the center of the other tab (left to right): 10"
• Distance between the tabs front to back (opposite rails): 21-15/32"
• Distance from outside to outside of the tabs front to back (opposite rails): 22-13/32"

Reese # 58079

Customers compare 6002 to these similar products

Pro Series 25K Gooseneck Plate for Fifth Wheel Rails by Draw-Tite, Hidden Hitch and Reese$170.95

Reese Above-Bed Gooseneck Trailer Hitch - 25,000 lbs$219.95

Curt Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails, 25,000 lbs GTW$237.20

Reese Elite Series Above-Bed Gooseneck Trailer Hitch - 25,000 lbs$556.62

Hide-A-Goose Underbed Gooseneck Trailer Hitch with Installation Kit$357.90

Customers Who Purchased This Gooseneck Also Bought...

Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt $124.95

Reese Safety-Chain Attachment for Gooseneck Hitches on 5th Wheel Rails $72.95

7-Way Connector 7' Loop $36.95

Reese Universal Base Rails for 5th Wheel Trailer Hitches - 10 Bolt $99.95

Reese 5th Wheel Tube Spacer Kit for Dodge Ram $10.99

Ask the Experts about this Draw-Tite Gooseneck

• Will the Draw Tite 6002 fit in the Rails for the DrawTite 5th Wheel Trailer Hitch
  
• The Draw-Tite 25K Gooseneck Trailer Hitch, item # 6002, will install in the rails that your fifth-wheel hitch sets in. If you need the gooseneck to be set further back in the hitch, for turning clearance, you could use the Pro Series 25K Gooseneck Plate for Fifth Wheel Rails, item # 49080, which is offset toward the rear rail in the bed of your pickup. The center of the ball is 10-1/2 inches from one end of the plate and 14-1/2 inches from the other end. There is not a sliding gooseneck
  view full answer...


• Is the Ball on Draw-Tite 25K Gooseneck Trailer Hitch Offset
  
• The ball on the Draw-Tite 25K Gooseneck Trailer Hitch for Fifth Wheel Rails, part # 6002, is centered front to back and side to side. Whether or not the ball sits centered over the axle will depend on the rails in your truck bed. It will fit Valley rails. In order to find out whether or not it will fit Husky rails, you will need to measure. The Tab measurements for the hitch are at the bottom of the product page. The pins used to attach this hitch to the fifth wheel rails are the same same as
  view full answer...


• Recommended Gooseneck Hitch to Fit Fifth Wheel Rails on 2002 GMC Sierra
  
• Since you already have the rails installed in the bed, I would recommend the Reese Above-Bed Gooseneck Trailer Hitch, part # RP58079. This hitch would easily mount to the existing fifth wheel rails and would allow you to easily switch back and forth between gooseneck and fifth wheel trailers. I would recommend this hitch over the part # 6002 that you were looking at, due to the integrated safety chain loops offered by the RP58079. I will include a link below to the installation instruction
  view full answer...


• Gooseneck Trailer Hitch that Will Fit in Place of a Reese 5th Wheel Trailer Hitch
  
• The gooseneck plate that you have referenced, # 6002, fits in above the bed rails like # RP58058. It almost sound like you have the power puck system (underbed) for wither a Signature series or Elite series 5th wheel trailer hitch. If this is the case, you would need # RP30845. I have included a link to the instructions for both plates.
  view full answer...


• Will the Draw-Tite Gooseneck Hitch # 6002 Work with My Existing Bed Rails
  
• If you are wanting to use the Draw-Tite Gooseneck hitch you referenced, part # 6002, I would recommend that you measure your existing rails, and compare them with the photo I edited for you. If the holes in the rails that you have installed match those shown in the photo, the # 6002 would be compatible with your existing rails.
  view full answer...


• What 5th Wheel Rails Will Accept Draw-Tite Gooseneck Hitch 6002 On a 2002 Dodge Ram
  
• The Draw-Tite gooseneck trailer hitch # 6002 will fit Curt, Draw-Tite, Hidden Hitch, Reese, Husky, and Valley above the bed rails. If you are not sure which rails you have you can take some measurements to determine fit. The standard above the bed rails will measure approximately 22 inches apart on center. There are 3 sets of mounting slots on each rails. The inner most set is 10 inches apart on center. The next set out is 20-1/2 inches apart on center, and the last set is 29 inches apart on
  view full answer...