Select Your Vehicle
view cartView Cart

Free Shipping on Orders Over $99

Only 17 Minutes Remaining



Front Mount Hitch > 2014 > GMC > Sierra

Curt Front Hitch for the GMC Sierra, 2014

Curt Front Hitch

ratingratingratingratingrating (10 reviews)


Code:   C31012

Retail:$262.56

Price:$157.54


Shipping Special

Shipping Weight: 36.34 pounds

Quantity: 







Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - GMC Sierra, 2014

Easily attach a variety of accessories to the front of your GMC Sierra with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your GMC Sierra
  • Precision, robotic welding maximizes strength and improves fit
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Made in USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 500 lbs
  • Gross trailer weight: 5,000 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



31012 Curt Front-Mount Trailer Hitch Receiver




GMC Sierra, 2014 Owners Who Purchased this Front Hitch Also Bought...








Customer Reviews

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31012

Average Customer Rating:  ratingratingratingratingrating4.6 out of 5 stars   (10 Customer Reviews)

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.


- C31012

ratingratingratingratingrating by: Gregg H.04/10/2012


Here are a few pictures of the hitch on my 2012 Avalanche. The ones from underneath didn't come out as nice as I had wanted. 36753






- C31012

ratingratingratingratingrating by: Steve Y.07/01/2012


So far so good! Looks and feels like a high quality product, the welding looks great, everything was fabricated square and accurately. The first thing I did was remove the lower black fascia from my truck so it is easier to properly locate the hitch. Once properly located on frame of truck and mounting are holes are marked all you have to do is simply drill four 17/32" holes and fish bolts thru frame. The fish wire that is provided to pull the bolts through the frame was ingenious, someone was really thinking when they designed this. This was truly a breeze to install. 46385






- C31012

ratingratingratingratingrating by: Kris W.10/29/2013


e-trailer service and shipping were fantastic! As far as the Curt front receiver for 2007 Tahoe, the product is very well made and the install took about 1 hour. The ground clearance is not good. Ground clearance on my 2007 Tahoe is 7 inches and the angle of approach is half what it used to be. Angle of approach with my receiver winch is unacceptable. I also purchased the Roadmaster 10,000 pound 6 inch high/low hitch adapter and that helps to get the winch up, but the receiver is still plowing through mud. If you have a 2007+ Tahoe, get the Curt front mount skid shield to avoid catching the receiver hitch on rocks or driveways. I'd rather have a receiver through the license plate area or higher for better ground clearance and no loss on angle of approach - so I'm looking to custom build one since I can't find a manufacturer that makes one. 105679






- C31012

ratingratingratingratingrating by: Randal Creel, Sr03/21/2011


I ordered my Front Receiver for my Suburban back in January and received it about 3-4 days later. I was extremley pleased with the order process. I finally got around to puting it on in March???? Installation was a breeze, you do have to drill 4 holes but it was no big deal. Then I thought the hard part was going to be fishing the bolt/washers into the drilled holes but it was a piece of cake and actually was kinda fun. The "fishing" lines provided in the kit were great and they are now in my tool box in case I ever need to go "fishing" again. The Hitch works great and makes moving my trailers around a snap. I chose not to trim the front spoiler because it looks fine to me. I also now have a really neat step to get under the hood and I am going to add a winch stand and other toys to it. Thanks the product is great!!!!!!!!! 9984






- C31012

ratingratingratingratingrating by: AO12/17/2010


Good Product/Install, Loss of Ground Clearance Install directions were detailed and straight foward. Having the right drills, bits, and sockets make the project easy. I spent 1.5 hours verse the recommended 45 minutes as a non-professional installer. Very pleased with the product, but instead of having to trim any fascia, the lowest part of the receiver sits below the fascia, making this the lowest point of the vehicle. I was hoping the receiver would maintain the vehicles stock ground clearance, but it is just too low. I installed this to carry a portable mounted winch and it may be too low to do this job effectively. 4283






- C31012

ratingratingratingratingrating by: Gary S10/06/2014


Super fast shipping,but could use better packing.Hitch actually made a large hole in box,UPS driver had me check to see if anything was missing.Easy install,but try finding a 17/32" bit. After seeing how big the front opening is I just used a 1/2" bit. I think it took longer to remove, trim and reinstall the front spoiler than the rest of the job. Looks great installed 154795






- C31012

ratingratingratingratingrating by: Jack S.02/28/2014


Hitch was ordered, delivered in a timely manner. Suggest you offer 17/32 drill bits as I have visited Lowes, Home Depot, and 5 independent Hardware stores, no one has this size drill bit. I do not wish to use a readily available 9/16 drill bit, but may have too!!! 118018






- C31012

ratingratingratingratingrating by: Tom01/10/2014


Love it! It was very easy to install. 30 minutes max. The fish wire worked great. This will make it very easy to maneuver my boats into tight garage. 112495






- C31012

ratingratingratingratingrating by: Tom Chase11/07/2013


high quality product, mounted pretty easy. It was delivered quickly and in perfect shape. I would buy from etrailer again 106660






- C31012

ratingratingratingratingrating by: Trent S11/25/2011


Fit was perfect, installed easy. Save $ when you do it yourself. 27370




15
15


Ask the Experts about this Curt Front Hitch
Expert Answers about Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31012Do you have a question about this Front Hitch?


  • Front Mount Hitch Receiver Location on a 2007 Chevrolet Tahoe LT3 Z71
  • I spoke with my contact at Curt and he told me that there is only one mounting option for the Curt Front Hitch, # C31012. This hitch was designed to mount to the underside of the frame rails, hanging below the frame as it is pictured (see photo). He also told me that this hitch was not designed or tested to mount in any other orientation and doing so could not only cause damage to the hitch and your vehicle, but would void the warranty of the hitch. If you would like to determine where...
    view full answer...

  • Fascia Trimming Required to Intstall Curt Front Mount Receiver Part # C31012
  • To install the Curt Front Mounted Receiver, part # C31012 the lower portion of the front bumper fascia will either need to be removed or trimmed. The instructions provided for this receiver are very specific and comprehensive complete with color photos and a diagram showing where the fascia piece needs to be trimmed as well as the dimensions for the trimmed portion. I have included a link to the instructions for you to examine. Step number 9 of the instructions shows a very good color...
    view full answer...

  • Front Hitch Recommendation for a 2011 GMC Yukon SLT
  • The recommended front mount hitch for your 2011 GMC Yukon is the Curt Front Hitch # C31012. I attached installation instructions for this hitch for you to check out also. The # 31042 front hitch you referenced is designed to fit an older model Yukon and would not work for you.
    view full answer...

  • Can I Install a Base Plate Kit and Front Mounted Trailer Hitch on a 2007 GMC Yukon XL
  • The Roadmaster MX Base Plate Kit, # 3154-3, is one of the correct base plate kits for a 2007 GMC Yukon XL 1500. I have included a link to all the base plate kits for the Yukon XL in case you have different model. I spoke with my contact at Curt about the Front Hitch, # C31012. He stated that it will fit your 2007 GMC Yukon as long as it is a 1500, and not a hybrid model. There are no front hitches available for the 2500 or hybrid models. I have included a link to the instructions for...
    view full answer...

  • What Needs to Be Removed to Install a Curt Front Mount Trailer Hitch # C31012, 2009 Chevy Suburban
  • To install the Curt Front Mount Trailer Hitch # C31012 that you referenced you will need to either remove the lower fascia or trim it. Check out the picture I attached to see how it would need to be trimmed.
    view full answer...

  • How Much Ground Clearance is Lost with Curt Front Hitch Installed on a 2007 Chevy Suburban
  • To determine the ground clearance with Curt front mount receiver # C31012 installed on your 2007 Chevy Suburban you will need to take some measurements. At the very front of the vehicle at the bottom of the front fascia measure down 1 inch. This is approximately where the bottom of the receiver will be once installed. Measure from the ground to this point to determine ground clearance. You should only be loosing an inch or so. I have included a link to the installation instructions for you.
    view full answer...

  • What Size Holes Need to be Drilled to Install Curt Front Mount Hitch on a 2014 Chevy Silverado
  • I am not sure why the instructions are not opening for you so I can email them to you in a separate email. But in the instructions step 4 says to drill four 17/32 inch holes. There is some fascia trimming required to install the hitch also shown in the instructions so you will need to compare them to your truck to see if the crash avoidance system or parking assist system will get in the way. Based on pictures I have seen of the hitch installed on customers trucks I do not believe it...
    view full answer...

  • Recommended Snow Plow for 2014 GMC Serria All Terrain
  • You can certainly use a snowplow on your 2014 GMC Sierra 1500. I recommend the Agri-Cover SnowSport HD Snowplow, # A40040HD. I recently saw a demonstration of this plow and was impressed by its ease of installation, durability and its ability to take on hard snow banks, hidden stumps and curbs. I also recommend getting the Agri-Cover SnowSport Hold Down Strap, # A60220, to keep the blade down when meeting those hardened snow banks. I have included links below to the installation details...
    view full answer...


Expert Answers about Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31012Do you have a question about this Front Hitch?



GMC Sierra Accessories



Front Mount Capacity
Line Pull:
9,000 lbs.
Vertical Load:
lbs.

Front Hitch Installation Instructions C31012 Installation instructions C31012 Installation Instructions

Tech Tip
Drilling required for installation,Trimming of front air dam and/or fascia may be required for installation,,

Manufacturer Estimated Installation Time

Most Popular Balls:

1-7/8" hitch ball - 19260


2" hitch ball - 63845


2-5/16" hitch ball - 63847


If you have any questions you can contact our customer service department.

Info for this part was:


Expert Research:
Michael L

Written by:
Lindsey S

Expert Research:
Michael H

Expert Research:
Jameson C

Expert Research:
John H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.










Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email





Free Shipping on Orders Over $99

Only 17 Minutes Remaining


etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com