
Rating: 




15 reviews
Code: 65028
Retail:$193.55
Price:$144.95
Shipping Weight: 46 pounds
Shipping SpecialEasily attach a variety of accessories to the front of your Chevrolet Suburban with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
2005 Suburban by Chevrolet Owners Who Purchased This Front Hitch Also Bought...
Average Customer Rating: 



4.9 out of 5 stars (15 Customer Reviews)




by: Eric B07/03/2009
Is this review helpful?
Fast shipping and easy install Had to trim about 1/2 inch of plastic off on my 2500HD but it bolted up perfect.2088




by: Kim10/23/2007
Is this review helpful?
prompt del, would order again product ordered fit perfect.No Problems 461




by: Dennis C05/08/2013
Is this review helpful?
This bolted right up to the frame. I had factory towing hooks so it was just as easy as removing four bolts and replacing them with the included longer bolts. Just need to support the hitch while you start the bolts. It took about forty five minutes. Product was shipped fast and was packaged very well. Good follow up from etrailer.79438




by: Robert J03/22/2013
Is this review helpful?
The product 65028 fit my truck perfectly the instructions and diagrams were very easy to read and follow. I would recommend it to anyone.71984




by: Russell02/01/2013
Is this review helpful?
Finally warmed up enough to get the unit installed. Everything worked as planned. Now to try it out and move my boat down the ramp with ease. Have to wait for lake to thaw first. Thanks for handling my needs. Will recommend your site to others and also use again for my wish list. RDH64761




by: Frank12/06/2012
Is this review helpful?
The Draw-Tite Front Mount hitch is exactly what I needed. It is a perfect fit and was relatively easy to install (once I went and purchased an 18mm wrench). Etrailer.com's service, price, and speedy delivery were outstanding. I will definitely keep them in my list of preferred vendors for future purchases.60818




by: craig10/20/2012
Is this review helpful?
just installed today easy to follow instructions and very easy to understand took around 25 minutes to install great product and i didnt have to hack into my frame to make holes i would recemend this to my friends and coworkers 57761




by: Dan10/08/2012
Is this review helpful?
Product was delivered timely and installed easily, perfect fit, as advertised, no trimming was required on front fascia as it fit on top of the receiver56657




by: Robert Huseby06/13/2012
Is this review helpful?
etrailer had a very good price on my Draw-Tite front mount hitch, Delivery was fast and efficient.43927




by: John M11/14/2011
Is this review helpful?
Went on easily. And I was able to keep the factory tow hooks on the vehicle. So far, so good. Now I get to see how well it works backing my 25 ft boat up a twisting driveway...26953




by: E.B05/30/2009
Is this review helpful?
Great Item Great product. all the bolt holes lined up perfectly, truly a no drill install. Trimming the fascia was not nessesary on my 2005 2500HD 4x4. (I just wish I would have known that before hand..)1910




by: Louie08/13/2008
Is this review helpful?
Fit well. It took about an hour to install. You really don't have to remove to recovery hooks. Just the bottom and inside bolts.It looks great on my 2005 Chev HD and I didn't have to trim the fascia.1165




by: 00Silverado04/15/2007
Is this review helpful?
Excellent Receiver Very easy to install, less than 20 min to install, I have and aftermaket valance witch had to be trimmed but if you take your time it looks like a professional did the job.131




by: TK04/13/2007
Is this review helpful?
Simple! Great and Simple!128




by: joe fox06/01/2011
Is this review helpful?
great product and great service very easy to install. thank you joe fox15891
Ask the Experts about this Draw-Tite Front Hitch
Related Products...
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.