Call at 800-298-8924 for expert service. We are your Chevrolet front hitch experts, and offer a lowest price guarantee. carries a complete line of Draw-Tite products for your Chevrolet S-10 Pickup 1997. Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" part 65004 from Draw-Tite can be ordered online at Complete front hitch installation instructions and technical support.
5 1

Price: $123.95

zoom in icon
zoom out icon
pop out icon
replay 360 icon
Draw-Tite Draw-Tite

1997 Chevrolet S-10 Pickup Draw-Tite Front Mount Trailer Hitch Receiver 2"

Draw-Tite Front Hitch

(1 reviews)

Code:   65004


Price: $123.95

Shipping Special

Shipping Weight: 31 pounds


1997 Chevrolet S-10 Pickup - Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Easily attach a variety of accessories to the front of your Chevrolet S-10 Pickup with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.


  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your Chevrolet S-10 Pickup
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design


  • Line pull: 9,000 lbs
  • Vertical load: 300 lbs
  • Gross trailer weight: 3,000 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

65004 Draw-Tite Front-Mount Trailer Hitch Receiver

65004 Installation InstructionsInstallation Details 65004 Installation instructions

Front Mount Capacity
Line Pull:
9,000 lbs.
300Vertical Load:
# 300 lbs.

No drilling required Manufacturer Estimated Installation Time

Tech Tip

Application includes ZR2 models. No drilling required for installation , Trimming of front air dam and/or fascia may be required for installation

Customer Reviews

Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 65004

Average Customer Rating:  5.0 out of 5 stars   (1 Customer Reviews)

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

- 65004

by: Bob S04/17/2014

Received product as described and quickly. Product was easy to install. I installed by myself. Bolt patterns matched and all hardware was included. 125686


Ask the Experts about this Draw-Tite Front Hitch
Do you have a question about this Front Hitch?

  • Which Front Hitch Fits a 2002 Chevy Blazer ZR2 4 Wheel Drive
  • I have a solution for you, but the Curt # 31021 does not fit the ZR2 models of the 2002 Chevy Blazer. The Draw Tite Front Hitch part # 65004 is designed to fit the ZR2 models though and would be what you need.
    view full answer...

  • Front Mount Trailer Hitch Receiver for a 1998 2-Door 4x4 Chevy Blazer ZR2
  • I checked with Draw-Tite and the Draw-Tite front mount hitch # 65004 fits the 1995 to 2005 Chevy Blazer, downsize, all models so that would include the ZR2s and 2 door models. I have included a link to the installation instructions for you to view.
    view full answer...

  • Trailer Hitch Recommendation for a 2001 Isuzu Trooper
  • The trailer hitch you referenced, # 65004, is a front mount hitch. If you need a replacement front mount we do not carry any options. But, if you need a rear mounted hitch, we do have several hitches that will fit your 2001 Isuzu Trooper. I have included a link to them for you. The most popular hitch for your vehicle is Curt trailer hitch # C13098. One benefit of this hitch is that the cross tube is sealed on both ends to prevent moisture from getting in and rusting the inside of the...
    view full answer...

  • Does Draw Tite #65004 Front Mount Receiver Fit 2001 Isuzu Trooper LTD?
  • The Draw-Tite Front Mount Trailer Hitch Receiver, part # 65004, is a front-mount hitch receiver for the Isuzu Hombre. It is not suitable for use on your 2001 Trooper. The required installation hardware and instructions are included with this product when it ships new, but we do offer a replacement hardware kit, part # RHK. I spoke to my technical contacts at Draw-Tite, Reese and HiddenHitch and confirmed that only rear-mount hitch receivers are available for your vehicle. No front-mount...
    view full answer...

  • Trailer Hitch and Bike Carrier Recommendations for a 1999 Mercedes CLK 320 Convertible
  • First, if your 1999 Mercedes CLK 320 convertible does not already have a trailer hitch you will need to install one using # C11815. It fits Coupe and Cabriolet Convertible models but only if they are built on the 208 chassis. It looks like in 1999 they were all the 208 chassis so no worries. For a bike carrier you will need one that is compatible with a Class I trailer hitch. The VeeMe, # VME-V2 is a great option since it weighs just 12-1/2 pounds and holds the bikes at the wheels making...
    view full answer...

  • Front Mount Hitch Recommendation for 2012 Dodge Ram 2500 With 500 lb Vertical Load Capacity
  • A 500 lb rated front mount hitch for your 2012 Dodge Ram 2500 is the Draw-Tite # 65063. This will fit your truck if it has factory tow hooks. I have the installation instructions attached. The hitch will bolt to the tow hook brackets with the included hardware and then you will re-install the tow hooks over the hitch. This will sandwich the hitch between the tow hooks and tow hook brackets. This hitch has 9,000 lb line pull and 500 lb vertical load weight capacity limits. Please check...
    view full answer...

Do you have a question about this Front Hitch?


At we guarantee:

Highest quality front hitch for the best price.

Real product know-how.

  • We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. This helps you get the right product the first time.
  • Every day our teams test, review, assemble and install our products. Our modern installation facilities allow our expert installers and customer service representatives to actually install and use the items we sell, so you can get real advice, from a real person who has the knowledge and expertise needed to solve your problem.

Most detailed, accurate front hitch information available.

  • Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.

Information for this part was:

Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Adam R
Updated by:
Laura H
Expert Research:
Lori W

Installations, made easy.

  • We love helping people.
  • We have the most highly trained customer service, hands-on experience, step by step videos and installation instructions. We are prepared to answer any question, give advice, or troubleshoot any problem you come across.

Fast shipping.

Personalized service for life.

  • We provide one-on-one, personalized service from the ordering process through the life of your product.

Trusted since 1946.

  • We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.

Info for this part was:

Written by:
Lindsey S

Expert Research:
Michael H

Expert Research:
Adam R

Updated by:
Laura H

Expert Research:
Lori W

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

About Us
photos and videos

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.


Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.