MagnaFlow Stainless Steel Cat-Back Exhaust System - Gas

MagnaFlow Exhaust Systems - MF16702

This cat-back exhaust system improves engine performance and durability by boosting horsepower and torque. Its technologically advanced, Mandrel bent tubing and straight-through muffler allow the exhaust to flow more freely through the system.

Features:

• Improves engine performance by increasing horsepower, torque and fuel efficiency and decreasing exhaust gas temperature
  • Mandrel bent tubes allow for unrestricted airflow by maintaining the same diameter through every curve
    • Unrestricted airflow decreases back pressure ("exhaust turbulence")
  • Straight-through muffler has a stainless steel perforated core that runs straight through, end to end
    • Layer of stainless steel wool insulates the perforated core to absorb noise, shield high exhaust temperatures and prevent blowouts
    • Contains no baffles, chambers or louvers that restrict airflow
• Signature sound is deep and throaty on throttle but quiet inside the vehicle
• All materials made with 100% stainless steel
• Clamps and hangers included for installation
• Lifetime warranty

Specs:

• Tubing diameter: 2-1/2"
• Muffler dimensions: 5" tall x 8" wide x 24" long
• Tailpipe diameter: 2-1/2"
• Tip diameter: 3-1/2" x 4-1/4" oval tip
• Number of tips included: 1
• Single exhaust system
• Rear exit position

The cat-back system is the portion of the exhaust system from the outlet of the catalytic converter to the tailpipe. MagnaFlow systems have Mandrel bent tubes that allow for unrestricted airflow by maintaining the same diameter throughout every curve. This curvature leads to decreased back pressure.

MagnaFlow mufflers have a stainless steel perforated core that runs straight through the muffler, end to end, with no baffles, chambers or louvers that restrict airflow. A layer of stainless steel wool insulates the perforated core to absorb noise, shield high exhaust temperatures and prevent blowouts.

Together, the Mandrel bent tubes and straight-through muffler increase horsepower, torque and fuel efficiency and decrease exhaust gas temperature. MagnaFlow's signature sound is deep and throaty on throttle but quiet inside vehicles. All materials are made with 100 percent stainless steel. Clamps and hangers are included for installation. It includes a lifetime warranty.

This dyno chart displays the differences in power and torque between OEM (blue) and MagnaFlow (red) exhaust systems. The darker red and blue lines represent the torque measurements; the lighter red and blue lines represent the power measurements.

16702 MagnaFlow Cat-Back Exhaust System

This Product Fits The Following Vehicles

2007 - 2011 Dodge Nitro R/T with V6 4.0L Engine

2007 - 2011 Dodge Nitro V6 3.7L Engine

Ask the Experts about this MagnaFlow Exhaust Systems
Do you have a question about this Exhaust Systems?

• What are the Power and MPG Increases for the MagnaFlow Cat-Back Exhaust on a 2010 Dodge Nitro
  
• I spoke with my contact at MagnaFlow and the Stainless Steel Cat-Back Exhaust System, # MF16702, will give you a 10 percent increase in horsepower and torque. For your 2010 Dodge Nitro 4.0L you will be looking at a 9 to 15 horsepower increase and an additional 14 ft lbs of torque. He also told me that they do not measure the level of fuel efficiency for their exhaust systems. Fuel efficiency is more of a by product of this system since it improves your engine performance. There are many facto
  view full answer...