Derale Engine Oil Coolers - D15603
13" Wide x 4-9/16" tall x 2" deep, super-efficient, stacked-plate cooler core comes with a sandwich adapter and all necessary installation hardware, making it easy to prolong the life of your engine and improve its overall performance.
- Prolongs life of engine oil, reducing number of necessary changes
- Improves overall functioning and performance of engine
- Reduces oil temperature by as much as 50 degrees
- Cools effectively through use of super-efficient, stacked-plate core
- Most efficient cooling system with the large surface area of the stacked plate design and turbulator technology
- Furnace-brazed aluminum construction for great heat dissipation
- Provides external lines, via sandwich adapter, for simple installation of oil cooler without having to reposition oil filter
- Stacked-plate cooler core
- Sandwich adapter
- High-temperature, high-pressure rubber hose with stainless steel clamps
- Brass hose-barb adapters
- Complete mounting kit
- Made in USA
- Heat exchanger:
- Inlets: -8 AN
- Overall dimensions: 13" wide x 4-9/16" tall x 2" deep
- Distance between inlets: 10"
- Distance between mounting holes: 12-1/4"
- Sandwich adapter:
- Inlet/Outlet ports: 1/2" NPT
- O-ring diameter: 3-1/2"
- Engine filter thread size: 13/16"-16
- 1-Year warranty
The stacked-plate heat exchanger included is the most effective type of oil cooler, primarily because of its increased surface area. Allowing fluid to spread out over this larger surface area decreases the time required for heat transfer to take place, resulting in ultimate efficiency.
The sandwich adapter in this kit provides the external oil lines necessary to install a cooler without requiring you to move the factory spin-on oil filter, making it even easier to extend the life of your vehicle's engine. In addition, the thermostatic bypass feature allows oil cooler than 180 degrees to bypass the heat exchanger, so your engine will warm up faster.
15603 Derale Stacked Plate Engine Oil Cooler Kit with Sandwich Adapter, Type C
Customers compare D15603 to these similar products
Ask the Experts about this Derale Engine Oil Coolers
Do you have a question about this Engine Oil Coolers?
- Engine Oil Cooler Recommendation for a 2010 Dodge Journey STX
- For your 2010 Dodge Journey, I recommend the Derale Stacked-Plate Engine Oil Cooler Kit w/ Non-Thermostatic Sandwich Adapter, # D15604. This kit comes with multiple engine filter thread sizes, one of which should fit your Journey. The kit includes the cooler, hose, sandwich adapter, and all the hardware needed for installation. I have included a link to our FAQ article on Engine Oil Coolers for reference.
view full answer...
- Engine Oil Cooler Recommendation for a 2006 Dodge Dakota 4.7L V8
- I would recommend the Derale engine oil cooler kit, part # D15602, for your 2006 Dodge Dakota Quad 4.7L V8. This oil cooler is the stacked-plate design, which is the most efficient and smallest in size. It comes with a sandwich adapter that mounts between the engine and the oil filter and supplies external lines for the oil cooler. It also has an assortment of multiple sleeve nuts to ensure proper filter thread size. It does include the correct size for your vehicle, which is the 3/4 inch - 16 e
view full answer...