This plain-finish cam-lock is for all van bodies, trucks and trailers. Ideal for side door and rear door enclosed cargo trailer applications, the lock can be installed on flush to 3/4" offset doors. Call 800-298-8924 to order Redline Enclosed Trailer Parts part number 383200 or order online at etrailer.com. Free expert support on all Redline products. Guaranteed Lowest Price and Fastest Shipping for Universal Cam-Door Lock for Enclosed Trailers. Enclosed Trailer Parts reviews from real customers.
$30.95
Select Your Vehicle

View Cart

Enclosed Trailer Parts > Doors > Door Hardware > Door Lock > Cam Door Lock > Redline

Universal Cam-Door Lock for Enclosed Trailers

Redline Enclosed Trailer Parts

(44 reviews)


Code:   383200

Retail:$35.32

Price:$30.95


Shipping Special

Shipping Weight: 6.28 pounds

Quantity: 






Redline Enclosed Trailer Parts - 383200

This plain-finish cam-lock is for all van bodies, trucks and trailers. Ideal for side door and rear door enclosed cargo trailer applications, the lock can be installed on flush to 3/4" offset doors.


Features:

  • A bridge-type keeper prevents accidental opening and ensures safe locking action
  • The positive double-action handle gives dual protection against in-transit jarring
  • Uses 3/4" I.D. Pipe (not supplied)


Specs:

  • 3/16" Thick bearing covers
  • 1-3/4" Maximum lock protection
  • Square padlock or seal eye: 1/2"
  • Width of keeper: 1-7/8"
  • Width of mounting bracket: 5"
  • Mounting hole diameter for pipe brackets and holders: 13/32"
  • Handle measures 13-3/4" long and gets welded to the pipe (not included)


Product shown with lock (lock not included)

Product shown with lock (lock not included).

Replaces 5654X



5654X Universal Cam-Door Lock for Enclosed Trailers







Video of Universal Cam-Door Lock for Enclosed Trailers


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.



Video Transcript for Redline Enclosed Trailer Parts 383200 Review

Today we're going to review part number 383200. This is the Redline Universal CamDoor Lock for enclosed trailers. This part will contain all these pieces I have laid outhere, and I've pretty much laid them out in how they would be attached to the trailer.Basically it comes with two of the cam locks. It comes with four brackets, front andback - one, two, three, four; it comes with the handle; and it comes with the bridge-keeper latch. And basically what you would do is, you would need to supply a 3/4"inside diameter pipe, which would fit on these two cam locks and run through thebrackets. The handle would need to be welded to that pipe.

This plain finish cam lockis for all van bodies, trucks and trailers. It's ideal for side-door and rear-door-enclosedcargo trailer applications. This lock can be installed on flush doors or 3/4" offsetdoors. This bridge-type keeper prevents accidental opening and ensures safe lockingaction, and the positive double-action handle gives dual protection against in-transitjarring, and again this would be welded to the pipe that you would supply. Oncethat's...

you would just pull the door closed, slide it into the latch, put that down, andrun a lock through there. The brackets and the cam locks all have mounting holediameters of 1330'. The handle itself will measure an overall length of 13-3/4". Andthat should do it for our review on part number 383200.




Customer Reviews

Universal Cam-Door Lock for Enclosed Trailers - 383200

Average Customer Rating:  4.8 out of 5 stars   (44 Customer Reviews)

This plain-finish cam-lock is for all van bodies, trucks and trailers. Ideal for side door and rear door enclosed cargo trailer applications, the lock can be installed on flush to 3/4" offset doors.


- 383200

by: Danny H.03/15/2014


I purchased two of the Universal Cam-Door Lock for Enclosed Trailers - 38320. I used them to close barn doors that are 80" by 80" each. The cam -Door Lock works great for these doors. All the parts are very heavy duty. The Cam-Door Locks closes the doors very firmly against the frame from top to bottom, keeping the doors even and level. I have also used this kit to close doors on a wood drying kiln where the doors have to tightly seal. Again, they work great to apply the needed amount of closing pressure to engage the weather seals. This kit is a good buy where you need to close doors with firm pressure. 120809





Comments

The Cam Door Lock works great. I am still very pleased with the product. I have recommended it to a number of people.

Danny H - 03/23/2015

10266



- 383200

by: SW07/17/2014


Patrick, We have used the Cam-Lock for three generations of our Rapid Deployment Units (RDU Trailers). These RDUs are shipped all over the world and as often as not are deployed into challenging environments. The Cam-Lock system proved to be a rugged and reliable way to protect and secure the hatches over the battery compartments. SW 141761






- 383200

by: John M08/12/2014


Everything is well constructed however i will not be able to use them as the add did not have enough info and they will not fit the trailer i have. I ordered 3 sets and the add states will work on any enclosed trailer however they will not fit in place of the old ones as the bolt holes do not line up. I was only replacing as mine were rusted and i do not want to drill holes in a trailer that is only 3 years old just because the old ones are rusted. 146368






- 383200

by: Michael F.08/24/2013


I think the cam lock assemblies are jut the ticket. They are just what I needed for the trailer/toy hauler I built. I do wonder why the great big box for two little boxes? LOL I will definately think of ya'll when I need parts in the future. I do have one question. Do you carry add-on electric barkes that would fit on a common car hauling flatbed 16' trailer? 96674






- 383200

by: Paul Phelps09/21/2012


As a class project our students were designing and building a canoe hauling trailer for a local outreach camp. This kit worked great and looks great too. 55377






- 383200

by: Vincent Cianci03/17/2015


great kit to replace your worn out latch. obviously it doesnt come with the cross bar and this is NOT something you can just snap together in your driveway, well thats unless your home garage is a mini shop! simple to install works great, would recommend to a friend for sure. Thanks Etrailer! 179316






- 383200

by: Carl K.02/24/2015


I bought a used Pace trailer with a broken lock latch. Could not find anyone in Northern Michigan to fix it. Went on line at Pace, received the part in a few days. Very pleased. A lot more parts in the package than I needed but the price was still great. 175925






- 383200

by: Steve O.05/16/2012


A great product. Installed it on a side door of a Wells Cargo trailer to provide some security while the trailer is out of the lot. I would definitely buy this product again. Sorry, I didn't take any pictures and the trailer is on the road already. 40734






- 383200

by: JBS06/30/2015


Product was delivered within a couple of days and was exactly as described. I only needed the bottom piece so I wish I could have found just that, but as soon as I would have ordered that my guys would have broke something else!!!! 208428






- 383200

by: Matt melvin02/08/2011


It was nice to have a store that actually sells parts that you need for a change. The dealers don`t want to sell parts these days, just new units. Parts were shipped fast and usually when you need parts you need them asap. thanks. 6833






- 383200

by: R Wilson03/10/2011


Etrailer is my pro trailer parts store. They are quick to ship and even upgraded my delivery at no charge. They are the best and I would recommend to anyone needing trailer parts. R Wilson Ft Worth, TX 8974






- 383200

by: Jimmy C02/25/2014


This is a reasonably priced kit. It has everything needed. Also a snap to install. I know where I will be purchasing my trailer parts from now on. They even got it to me a day earlier than expected. 117639






- 383200

by: John H.07/06/2011


Purchased hinges and door latch. Good quality material.Made my custom built trailer look like factory built. Fastest shipping i have ever encountered,wouldn't hesitate to order from you again. 18737






- 383200

by: Bruce E.05/31/2012


Just received your Universal Cam- Door lock took less than 48 hours to arrive. Parts are of good quality and should be simple to install, however directions would have been helpful. 42208






- 383200

by: Earl Albee04/03/2012


Is a very good product. Strong and function is great. Makes a great closer for doors. It is simple to mount, but some instruction might be helpful. Great product. 35997






- 383200

by: Minnesota02/24/2012


All products worked great. Price was good. Fast delivery kept my project moving on schedule. Next project, etrailer.com will be the first place I look for parts. 32410






- 383200

by: Ben Rogge08/14/2013


I have ordered from etrailer before and again they have done a wonderful job getting exactly what I ordered. I will order again from them when the need arises 95074






- 383200

by: Jana01/25/2013


We are utilizing this product in a new application. It appears that they should work fine, but additional research will be needed to prove the parts. 64110






- 383200

by: Katrina Oaklund03/23/2011


Product was as described. Appreciated the dimensions and picture on the website. Delivery was awesome! Thanks for the great experience! I'll be back! 10171






- 383200

by: Brian T.03/12/2012


Awesome Customer Service... Got order out the same day even thought it was late when we ordered... Great Job and Great Product... 33655






- 383200

by: Steve K.03/05/2015


Ordered product which arrived quickly. This was my first transaction with e-trailer and I will definitely be back. 177077






- 383200

by: Tony lawson01/04/2013


Great product and very fast delivery. Pat was very helpful and very nice? Can't wait to get it on my trailer 62468






- 383200

by: Craig m03/17/2014


Very pleased With the product and the service I received it was delivered quick and was updated on time 121059






- 383200

by: Happy Trees LLC12/16/2014


Excellent engeneering and quolity. Easy to install on doors for dumping and full size. Made for last. 165633






- 383200

by: Rick S05/18/2015


Great product, just wish I could have used carriage bolts instead of hex bolts when installing. 194164






- 383200

by: dewayne02/06/2015


fast mailing and all parts were in the box thanks for selling a great American made product 172737






- 383200

by: Daniel G06/14/2013


Worked very well. Great fitment. Can't say much more than excellent product and service. 84742






- 383200

by: Marty T03/01/2011


Parts are quality items and shipped quickly. I will purchase future items here. Thank you 8206






- 383200

by: Steve W06/10/2011


The exact product I needed and quickly processed and shipped. Thank you, great job 16677






- 383200

by: KGB06/09/2011


All items as described and pictured. Shipping and response time was very quick. 16594






- 383200

by: James03/07/2015


I use about 10 of these a year they work great and VERY fast shipping! 177446






- 383200

by: Andrew02/09/2015


Extremely well made, and a perfect replacement for the original part> 172987






- 383200

by: Dean12/14/2012


I have got numerous items in the past and always been very satisfied. 61458






- 383200

by: Larry D.12/01/2012


Excellent product, delivered in 4 days. supper company to deal with. 60396






- 383200

by: T.Clark07/23/2015


Unbelievable service. Here faster than expected and good quality 213809






- 383200

by: dan d.12/23/2013


exactly what i needed! i'll definately shop with you again. 110949






- 383200

by: AJ C.12/19/2013


Good product and priced right but no directions included. 110492






- 383200

by: Jeff V01/28/2015


Exactly what I needed and shipping was fast! 171588






- 383200

by: rod t09/18/2014


good product,good price, fast delivery. 151995






- 383200

by: D. MELLEN12/05/2013


Printed instructions would be good. 109179






- 383200

by: Bob C11/17/2012


Great service. Fast shipping. 59607






- 383200

by: Terry03/29/2013


Good quality good price. 73237






- 383200

by: Steve04/02/2014


Unit is as expected. 123408






- 383200

by: TOM C12/06/2011


FIT PERFECT 27810




44
44


Ask the Experts about this Redline Enclosed Trailer Parts
Do you have a question about this Enclosed Trailer Part?


  • Recommendations for Converting a Swing Door on a Trailer to a Door Ramp
  • Converting from a double swing doors to a ramp door can definitely be done, it will require some fabrication and ingenuity on your part. I can help you pick out some of the more important components needed for this, but I will not be able to tell you every step of the way. The first thing you will need is a ramp/door. You will want to measure the opening of the rear of your trailer to get the correct size for the ramp. Without knowing how much weight will be on the ramp it is hard to...
    view full answer...

  • Recommendations for Converting a Barn Trailer Door to a Ramp Door
  • To convert your barn door on your Wells Cargo enclosed trailer to a ramp door I would recommend you use the Universal Cam-Door Lock for Enclosed Trailers # 383200 that you referenced as well as a 3/4 diameter pipe that you will need to get from a hardware store. For a hinge mechanism, if the current hinges you have are not adequate, I would recommend you get three 1/2 inch Diameter Greasable Hinge Pins # HP12412G to use as door hinges. You might also be interested in purchasing a...
    view full answer...

  • Universal Cam-Door Lock Recommendation for Toy Hauler that the Door Does not Close all the Way
  • I believe I know what is happening. It sounds like your door latches are at the middle of your door which leaves the top of the door slightly open. You could use a Universal Cam-Door Lock for Enclosed Trailers # like what you referenced. I would run it across the top lip of your trailer ramp so that it will secure the top of the door as well. Depending on the setup you might consider leaving your current latches and then install a # 383200 as well. Or, you could move your current...
    view full answer...

  • Availability of Hidden Hasp Locks for Universal Cam-Door Lock # 383200
  • The Master Lock Hidden Shackle Padlock, part # 970DPF will work with the Universal Cam-Door Lock, part # 383200. These locks can be purchased keyed alike. When ordering, simply select the keyed alike option in the drop down menu. Unfortunately, we cannot get this particular lock keyed alike to a different padlock or tongue lock. In the future, if you decide you would need additional locks with the same key number as those you had ordered before, we could special-order them from Master...
    view full answer...

  • Door Lock Recommendation for a Ramp Style Trailer Door
  • If you have a ramp style door that swings down and becomes a ramp what I recommend you do is purchase 2 separate 36 inch Lock Side-Door Bar Lock Assemblies, part # 305736, and mount one on either side of your door. This way you will get a handle and hinge on either side of the door like you want.
    view full answer...

  • Parts Recommendation to Convert Ramp Trailer Door to Barn Doors
  • The actual door material you will need to provide yourself. If the door opening you desire is the same as what you currently have you may be able to cut your ramp in half vertically and just put hinges on the sides of both sides and you would have barn style doors on your trailer. For hinges you could use the part # 383700. Probably want at least 2 per door. I attached a review video for these hinges. For a lock assembly you could use the # 305736. For door holders to keep the doors...
    view full answer...

  • Can a Universal Cam-Door Lock for Enclosed Trailers be Used in the Horizontal Position
  • It is possible to use the cam-door lock, # 383200, horizontally but it would need to be placed up higher than the midway point to reduce the amount of stress on it when the door is closed. Take a look at the picture I have included that shows this type of set up. For a lock you could use # BLDL-80.
    view full answer...

  • Availability of a 55 inch Cam Lock Door Lock for Enclosed Trailers
  • You would need to use the Universal Cam-Door Lock for Enclosed Trailers, item # 383200, to create a bar lock assembly of 55 inches. With this item you supply the 3/4 inch inside diameter pipe to make a custom door lock. Some welding is required for installation of this kit. Due to shipping restraints we do not have a Side-Door Bar Lock Assembly longer than 36 inches at this time.
    view full answer...

  • Replacement Door Lock Latches and Cam Door Locks Recommendation
  • The old Bargman L400 series locks you have on the trailer currently haven't been made for a very long time and apparently due to their rarity and how desirable they are people sell them for quite a bit of money when they can find them. I can't help you find those. For a similar handle lock you could use the Full Size Locking Steel Flush Door Latch # L3980. Cam door latches like part # 383200 usually just lock with a padlock or something like # 970DPF and there really isn't a way to...
    view full answer...

  • Trailer Side Door Lock for a Trailer with a Side Door that Sticks Out Up to 2 Inches
  • What you could do is use the universal cam-door lock # 383200. You can then get a bar with the proper offset needed to work with your trailer door. I have included a link to a video review of this product for you to view.
    view full answer...

  • Replacement Ramp Door Handle for a Horton Enclosed Trailer
  • After doing some research on Horton trailers, it looks like most of their enclosed trailers use cam-door style lock like part # 383200. If you just need a replacement handle, I recommend using part # 158-100. This handle measures 12-5/8 inches long and works with the cam-door style locks.
    view full answer...

  • What Size Pipe is Required for the Universal Cam-Door Lock for Enclosed Trailers # 383200
  • The Redline Universal Cam-Door Lock, # 383200, will work great for your 36 inch wide doors on your trailer. You will want to use a steel pipe with an inner diameter of 3/4 of an inch and an outer diameter no wider than 1-1/8 inches. The pipe will slide over the upper and lower cam lock ends and run through the 4 brackets. We had this lock in stock, so I pulled one from our warehouse and made a short video for you.
    view full answer...

  • Availability of Trailer Side-Door Bar Lock Assembly Like # 305736 in Lengths Other Than 36-Inches
  • The Redline 36-Inch Lock Side-Door Bar Lock Assembly # 305736 that you referenced is one of two sizes offered by Redline. The other size is a 55-inch version that is being added to our website now; that part number will be # 3057-55 and this will be available for order on our site in a day or two. We also offer their Universal Cam-Door Lock for Enclosed Trailers # 383200 that does not include the required 3/4-inch inner diameter pipe. You can use this kit with a pipe length of your choice...
    view full answer...

  • Is the Universal Cam-Door Lock # 383200 Made of Steel and Mounting Hole Spacing of Cam Bracket
  • I went out to the warehouse and pulled a Universal Cam-Door Lock # 383200. I used a magnet to determine the parts are steel but the grade of steel is not listed. For the bracket that the hooks part would go into the mounting holes are 4 inches apart on center.
    view full answer...

  • Would the Master Lock Hidden Shackle Padlock fit on a Trailer Door Latch
  • Most likely yes, but to be certain I attached a picture that has dimensions for the Master Lock part # 970DPF for you to compare to the latch on your enclosed trailer to see if it would be compatible. If that doesn't fit your latch I would go with the Master Lock Stainless Steel Padlock with Shielded Shackle # ML40D. This would be pretty hard to get a bolt cutter on.
    view full answer...

  • Cam Door Lock Kit Recommendation to get a 45-1/2 inch Long Cam Door Lock for Trailer
  • Since you are looking for a cam door lock that is 45-1/2 inches in length your best option would be to get the Universal Cam-Door Lock for Enclosed Trailers # 383200. With this kit you will be able to select the exact length of pipe to use from your local hardware store so that you get the exact length of door handle you need. You will need to use a 3/4 inner diameter pipe.
    view full answer...

  • Replacement Door Handle and Latch for an Enclosed Cargo Trailer
  • The handle and latch we currently offer is the Universal cam-door lock # 383200 for enclosed trailers. The handles measures 13-3/4 inches long so it may be a little long for your trailer. If you don't have a pipe, you will need a 3/4-inch inner diameter one. If you need to hold your trailer doors open, you can use the Redline enclosed trailer part # DH100. It will create a gap between the door and trailer of 2-5/8 inches. I included a video review for you as well.
    view full answer...

  • Recommendation for Making a 45 Inch Cam Door Latch
  • I have a solution for you, but it will require you to supply your own 45 inch long 3/4 inch inside diameter pipe. You will want to get the Universal Cam-Door Lock for Enclosed Trailers # 383200. Some welding is required for installation of this kit. I would use regular steel because it is easier to weld then galvanized materials.
    view full answer...

  • Can the Universal Cam-Door Lock Be Used on 42 Inch Doors
  • The Universal Cam-Door Lock for Enclosed Trailers # 383200 that you referenced are the same kind of door latches that are used semi-truck trailers. As long as they are installed properly you should have no problem with them on your grain truck.
    view full answer...

  • Where Can I Get a 3/4 inch Bar to use with the Lock Side-Door Bar Lock Assembly # 383200
  • You will need to go to a hardware to get a 3/4 inch inside diameter pipe to complete the installation of the Universal Cam-Door Lock for Enclosed Trailers, item # 383200. Some welding is required for installation of this kit. We also have the 36 inch Lock Side-Door Bar Lock Assembly, item # 305736, that is ideal for use on trailer side doors that may be smaller than rear doors. This item is complete and does not require welding for installation. Mounting hardware to secure the assembly...
    view full answer...

  • Availability of Replacement Handle Latch for Cam-Door Locks
  • I wish we did, but the Replacement Handle Latch # 158-102 has a 4 inch distance between mounting holes and the Replacement Handle Latch # 158-101 has a 4-1/4 inch distance between holes.
    view full answer...

  • Does a Pipe Get Welded to the Cam Ends of the Universal Cam-Door Lock, # 383200
  • First, the Universal Cam-Door Lock, # 383200, does not come with the pipe. You will need to provide a 3/4 inch diameter pipe. I would use regular steel because it is easier to weld then galvanized materials. The handle gets welded to the pipe but none of the other parts. I have linked a video review for you. If you want something similar that includes the pipe you can use # 305736.
    view full answer...

  • What Size Pipe is Needed to Complete the Installation of the Door Cam Lock
  • You will need 3/4 inch inside diameter pipe to complete the installation of the Universal Cam-Door Lock for Enclosed Trailers, item # 383200. Some welding is required for installation of this kit. We also have the 36 inch Lock Side-Door Bar Lock Assembly, item # 305736, that is ideal for use on trailer side doors that may be smaller than rear doors. This item does not require welding for installation.
    view full answer...

  • Can the Length of the Pipe be Adjusted on 55 Inch Lock Side-Door Bar Lock Assembly
  • The pre-assembled cam door lock # 3057-55 is already all put together and can't easily be modified and you may end up having to weld anyway. So I would just go with the universal one, # 383200, and having someone weld it all up for you for a nominal fee. There is likely a machine shop or muffler shop that can do that for you. The other option is to go shorter, # 305736, which is a 36 inch bar.
    view full answer...

  • Replacement Handle Latch for a Cam-Door Trailer Door Lock
  • It sounds like you are looking for a handle latch for your cam-door lock like part # 383200. For that you would want the part # 158-101. Only issue you may have is that the mounting holes for this are 4-1/4 inches apart. You may have to relocate the latch either to the left or to the right of your current holes.
    view full answer...

  • Does a 3/4 Inch Pipe Get Welded to the Upper and Lower Brackets of Universal Cam-Door Lock
  • No, you wouldn't weld the bar to the mounting brackets for the universal cam-door lock, # 383200. The bar needs to be able to rotate and welding it would prevent it from moving. Only the handle would be welded to the pipe. I have included a link to a video review of this part for you.
    view full answer...

  • Does the Universal Cam-Door Lock for Enclosed Trailers # 383200 Require Welding
  • For the installation of the Universal Cam-Door Lock for Enclosed Trailers # 383200 the only portion of it that requires welding is the handle to the pipe that you will supply. The rest of the assembly does not require welding for installation. The pipe you go with will need a 3/4 inch inner diameter and the cam ends will slip in there without requiring welding. The rest of the assembly is designed to be bolted to a trailer. But if you wanted to weld it there's no reason you couldn't.
    view full answer...

  • How Do the Cam Ends of the Redline Universal Cam-Door Lock # 383200 Install
  • Are you sure the pipe you have has an inner diameter of 3/4 of an inch? The cam ends of the Redline Universal Cam-Door Lock, # 383200 should fit tight into the pipe. However, since you already welded the handle to your pipe you could weld the cam ends so the pipe. You will want to make sure the outer diameter of the pipe isn't bigger than 1-1/8 inches.
    view full answer...

  • Width of Mounting Bracket for the for Cam-Door Lock part # 383200
  • I went out into our warehouse and measured the width of the bracket that accepts the cam door lock and found it to be 1-5/16 inches.
    view full answer...

  • Where Can I Get a 3/4 inch Bar to use with the Lock Side-Door Bar Lock Assembly # 383200
  • You will need to go to a hardware store to get a 3/4 inch inside diameter pipe to complete the installation of the Universal Cam-Door Lock for Enclosed Trailers, item # 383200. Some welding is required for installation of this kit. We also have the 36 inch Lock Side-Door Bar Lock Assembly, item # 305736, that is ideal for use on trailer side doors that may be smaller than rear doors. This item is complete and does not require welding for installation. Hardware will need to be provided...
    view full answer...


Do you have a question about this Enclosed Trailer Part?



Info for this part was:


Photos by:
Theodore B

Expert Research:
Robert G

Expert Research:
Michael H

Expert Research:
Jeff D

Expert Research:
Jameson C

Expert Research:
John H

Updated by:
Adele M

Expert Research:
Adam R

Updated by:
Lisa S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.










Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com