12-Volt DC Outlet - 150 Watt - 12-Amp Safety Fuse - Bracket Mount w/ Protective Cap

Optronics Electronics - A-1201

Gain access to a cigarette-lighter-style power receptacle with this bracket-mount outlet. This 12-volt DC receptacle includes a protective cap for marine applications and operates safely up to 12 amps or 150 watts.

Features:

• 12-Volt DC, cigarette-lighter-style plug compatibility
  • Allows you to plug in your 12-volt appliances without using an adapter
• Bracket mounted
  • Easily installed with included hardware
  • Can be flush mounted, if desired
• Protective cap keeps water from outlet
• 150-Watt operation
• 12-Amp safety fuse
• Silver with red cap and red and blue wires

A-1201 Optronics 12-Volt Outlet, Bracket or Flush Mount, Protective Cap

Customers compare A-1201 to these similar products

Marine-Grade, 12-Volt DC Outlet - 150 Watt, 12 Amp - Stainless Brass w/ Black Finish$5.25

Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly$11.95

12 Volt Outlet Kit, 20 amps$22.95

Marine-Grade, 12-Volt DC, Triple-Outlet Adapter - 3' Cord - LED Indicator$14.25

Hopkins Rear View Camera with Backup Sensors - 2-1/2" LCD$149.95

Customers Who Purchased This Electronics Also Bought...

Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot $1.21

Replacement 12-Volt DC Power Plug for Optronics Lighting Products $1.95

Rectangular Trailer Clearance, Side Marker Light with Reflector- Amber $1.95

Rectangular Trailer Clearance, Side Marker Light with Reflector - Red $1.95

Trailer Dome Light with Switch and Aluminum Base $7.25

Ask the Experts about this Optronics Electronics
Do you have a question about this Electronics?

• How Does the Optronics 12-Volt DC Outlet Install
  
• To wire up this 12-Volt DC Outlet # A-1201 is pretty simple. Basically, you would just run your 12 volt power to the included red wire and then using the female spade connector attach it to the male spade connector on the copper portion of the assembly. The black wire will ground to a clean metal surface and will attach to the spade connector that is more on the outside of the assembly. Check out the picture I attached for more clarification on this. You will be able to mount it anywhere usin
  view full answer...