Tow Ready Custom Fit Vehicle Wiring - 20135
Tow Ready Replacement 7-Way Flat Pin and 4-flat Combo Adapter Harness for Vehicles with a Factory Socket
- Ability to tow trailers with different style trailer connectors
- Durable plastic shell
- Provides both a 7-Way and a 4-Way covered trailer connector
- Mounting bracket included
- Replacement socket for the following vehicles with a factory 7-Way:
- 2007-2008 Chrysler Aspen
- 2004-2008 Chrysler Pacifica
- 2000-2009 Dodge Dakota
- 2000-2008 Dodge Durango
- 2000-2008 Dodge Ram 1500
- 2000-2009 Dodge Ram 2500 and 3500
- 2001-2003 Dodge Van
- 2003-2007 Dodge Sprinter Van
- 2003-2007 Freightliner Sprinter Van
- 2006-2010 Jeep Commander
- 2000-2010 Jeep Grand Cherokee
- 2005-2008 Jeep Liberty
- 2006-2008 Mitsubishi Raider
20135 7-Way and 4-Way Multi-Plug T-One Connector Assembly
This Product Fits The Following Vehicles
2000 - 2002 Dodge Ram Pickup 1500 with factory 7-way connector
2009 - 2009 Dodge Ram Pickup 2500 and 3500 Pickup with factory 7-way connector
2000 - 2002 Dodge Ram Pickup 2500 with factory 7-way connector
2000 - 2002 Dodge Ram Pickup 3500 Pickup with factory 7-way connector
2007 - 2008 Dodge Ram Pickup Pickup with factory 7-way connector
2006 - 2010 Jeep Commander with factory 7-way - excluding Rocky Mountian Edition
2006 - 2010 Jeep Commander with factory 7-way - Rocky Mountian Edition
2007 - 2008 Chrysler Aspen with factory 7-way connector
2000 - 2008 Dodge Dakota with factory 7-way connector
2000 - 2007 Dodge Durango with factory 7-way connector
2000 - 2009 Jeep Grand Cherokee with factory 7-way connector
2005 - 2008 Jeep Liberty with factory 7-way connector
2004 - 2008 Chrysler Pacifica with factory 7-way connector
2006 - 2009 Mitsubishi Raider with factory 7-way connector
2003 - 2006 Dodge Ram Pickup with factory 7-way connector
2003 - 2009 Dodge Sprinter with factory 7-way connector
2003 - 2009 Freightliner Sprinter with factory 7-way connector
2001 - 2003 Dodge Van with factory 7-way connector
Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...
Ask the Experts about this Tow Ready Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?
- How to get a 7-Way and 4-Way Connector for a 2000 Ford F250 Super Duty with Damaged 7-Way
- The two parts you will need to replace your damaged 7-way on your 2000 Ford F-250 and add a 4-flat connector to the rear of your vehicle is the Tow Ready Custom Fit Vehicle Wiring for the 2000 Ford F 250 and F 350 Super Duty, # 118243, and the Hopkins Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End, # HM40975.
The Tow Ready harness # 118243 is an exact replacement for the damaged OEM Wiring Harness and connects directly to the Standard OEM Connector. It comes
view full answer...
- What Connector Is Needed To Get 7-Way And 4-Way On Back Of 2003 Chevy Silverado
- The Tow Ready Multi-Plug T-One Connector Assembly for 7-Way & 4 Pole Trailer Connector, # 20135, that you have referenced is not the correct part for your 2003 Chevy Silverado. It is for Chrysler/Dodge vehicles.
The part you would need is the Hopkins Replacement Multi-Tow 7-Way and 4-Way Trailer Connectors for Ford, GM Trucks with Factory 7 Way, # 30955, that will connect to the OEM connector which is above the spare tire. That will give you a 7-Way and a 4-Way connector on the back of your t
view full answer...
- Wiring 2003 Pontiac Montana with a7-Way Trailer Connector
- The Tow Ready Multi-Plug T-One Connector Assembly, part # 20135 is a replacement for Chrysler, Jeep, Freightliner and Mitsubishi OEM trailer connectors.
For your Montana, I would recommend using T-1 Connector, part # 118355 in conjunction with part # ETBC7 if you are wanting to install a brake controller. The Brake Controller Install Kit, part # ETBC7 includes everything necessary to install a brake controller, as well as the adapter to convert the 4-pole provided by part # 118335 to a 7-way.
view full answer...
- Will The Tow Ready T-One Connector Assembly, # 20135, Work On A 2001 Jeep Grand Cherokee
- The Tow Ready Multi-Plug T-One Connector Assembly, # 20135, will work on your 2001 Jeep Grand Cherokee if you have a factory 7-Way connector on the vehicle now. It is a replacement part that will change your factory 7-Way to a 7-Way and 4-Pole trailer connector.
It will connect to the factory connector located under the rear of the vehicle and the 7-Way and 4-Pole will mount into the space where the 7-Way was located.
If you do not have the factory 7-way connector on your vehicle then you
view full answer...
- What do I Need to Operate the Trailer Brakes Behind a 2000 Ford F250 With Factory 7-Way
- You will need a brake controller in order to send brake power through the 7-Way to the trailer brakes. With a factory 7-Way, you will have a brake controller port underneath the dash that will make installing a brake controller a snap.
I would recommend the Tekonsha Prodigy P2 with the harness for your F-250, part # 90885-3035P. This kit is the brake controller and harness that plugs into the port. I have added a link to the kit as well as the instructions and a video of this kit being instal
view full answer...
- Availability of an OEM Replacement 7-Way Trailer Connector and Wiring Harness for a 2003 Ford F-250
- While there is not a specific harness for the 2003 Ford F-250 that is an OEM replacement, I do have a solution for you. Since your truck came with a factory installed 7-Way trailer connector, you can use the Draw-Tite Fifth Wheel and Gooseneck Wiring Harness, # 20110. Instead of installing it in the bed of the truck, you would just route it to the back. I have included a video link that might help with installation.
view full answer...
- Finishing Brake Controller Output Circuit on 2003 Dodge Ram with 4-Pole Trailer Connector
- As your Ram is not equipped with the 7-way connector, the brake output and 12-volt accessory circuits are not ran to the rear of the truck.
You will first need a 4-pole to 7-way adapter like part # 37185 that will plug into your existing 4-pole. You will need to run a length of 10 gauge wire from the blue lead of the adapter under the vehicle to the engine compartment. Make sure to avoid any moving parts like the suspension and steering components and anything hot like the exhaust. In the eng
view full answer...
- Installation of 7-Way Connector on 2001 Dodge Ram B2500 Van
- The Tow Ready Multi-Plug T-One Assembly, part # 20135, you have referenced will only fit the 2001 Dodge Ram Van that has an existing factory 7-Way connector on the vehicle. It is to be used as a 4-Way and 7-Way replacement for the factory 7-Way on the vehicle.
If your 2001 Dodge Ram Van has the factory square plug for the wiring harness at the rear of the vehicle, you will need the Tow Ready T-One Wiring Harness, part # 118381, and the Hopkins Adapter, part # 37185.
You will need to plug
view full answer...
- Parts Needed to Add a 7-Way and 4-Way Trailer Connector to a 2003 Jeep Grand Cherokee
- In order to add a 7/4-Way to your 2003 Jeep Grand Cherokee you will start by adding a 4-Way using # 118369. I have linked installation instructions and a video showing a typical installation for you. Next you will need a 4 and 7-Way installation kit using # ETBC7. This connector has a 7 and 4-Way connector like you are wanting and comes with all the wiring needed to install it. I have included some links that will explain the ETBC7 installation.
The installation instructions for the ETBC7 als
view full answer...
- Will Tow Ready T-One Vehicle Wiring Harness # 118369 Fit On 2004 Jeep Grand Cherokee
- It sounds like, for your setup, you will need a 7-way adapter. I recommend the Installation Kit for 7-Way and 4-Way Wiring # ETBC7. This kit includes everything you will need for a 7-way and gives you the option for installing a trailer brake controller if you need one down the road. I have provided a link to a video review of this product and a link to a video showing the typical installation of this item.
I have also included a link to our FAQ page on the ETBC7.
The Tow Ready T-One Conn
view full answer...
- 7-Way and 4-Way Replacement Connector for a 2003 Dodge Ram 1500
- I am sorry, but I am not showing that part Multi-Plug T-One Connector, part # 20135, is a fit for your 2003 Dodge Ram 1500. You need the 7-Way and 4-Way Replacement Connector for Dodge Trucks, part # 42145, for your truck. It will plug directly into a receptacle under the bumper on your Dodge. All you have to do is mount the connector, and you are ready!
view full answer...
- Replacement Trailer Connector for 2007 Ford F-150
- The Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket - Vehicle End, part # PK11893, is an exact OE replacement for your vehicle-end trailer connector. I have included a link to the part below.
view full answer...
- Parts Needed for Setting up a 2003 Dodge Ram 1500 For a Trailer with Electric Brakes
- If your 2003 Dodge Ram 1500 came with a 7-Way trailer connector from the factory it is pre-wired for a brake controller. If this is the case, all you would need is a brake controller and the wiring harness to plug the controller into the port under the dash. Our most popular brake controller is the Tekonsha Prodigy P2. It is a pretty easy controller to use and is quite effective. Part # 90885-3020P is the Tekonsha Prodigy and the proper wiring harness for a 2003 Ram with factory 7-Way. The whole
view full answer...
- Trailer Connector with 4-pole and 7-way, Part # HM40975 for 2003 Chevy Silverado 1500
- We have exactly what you are looking for. The 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, part # HM40975 has both the 4-pole and the 7-way trailer connector. This item would plug in to the socket located above the spare tire, it is very easy to install.
view full answer...
4.9 out of 5 stars (7 Customer Reviews)
by: Dwight02/21/2013
Installation Details
