T-One Vehicle Wiring Harness with 4 Pole Trailer Connector - Chrysler PT Cruiser

Tow Ready Custom Fit Vehicle Wiring - 118462

Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese

• Provides a 4-pole flat trailer connector for the vehicle
• Quick and Easy
• No Cutting, Splicing or Taping
• Just Plug in the T-One Connector and You're Ready to Tow
• Solid One Piece Construction
• 16 Gauge Bonded Wire w/ 4-Flat Plug
• Factory Appearance
• Connector is Equipped with an Upgraded Circuit Protected Taillight Converter
  • Protects itself and the tow vehicle against harmful electrical shorts and mis-wire situations.
• Simple Do-It-Yourself Instructions on Every Package

Can be used with 5-pole, 6-pole or 7-pole adapters.

Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.

Video of T-One Vehicle Wiring Harness with 4 Pole Trailer Connector - Chrysler PT Cruiser

This Product Fits The Following Vehicles

2001 - 2010 Chrysler PT Cruiser All Models

Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...

Ask the Experts about this Tow Ready Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?

• T-One Vehicle Wiring Harness for a 2002 PT Cruiser
  
• We do have a T-One Vehicle Wiring Harness, item # 118462, for the 2002 PT Cruiser. This T-connector requires you to run one wire to the vehicles positive battery post through a inline 10 amp fuse to protect the vehicles sensitive electronics and wiring.
  view full answer...


• Trailer Hitch Attachment Bolts for a Chrysler PT Cruiser
  
• Yes, all of the trailer hitches for the 2004 PT Cruiser come with the mounting hardware. Keep in mind that depending on the hitch you pick you may need to purchase the ball mount, pin and clip. Also you will need to purchase the appropriate sized hitch ball. You may also be interested in a wiring harness. Part number 118462 is a custom fit for your vehicle.
  view full answer...


• How to Install Wiring Harness On a 2006 PT Cruiser
  
• When you remove the taillight on the passenger side there will be two wire connectors connected to the back of the assembly. The connector connected to the turn signal circuit will connect inline with the wiring connector that has the green wire in it and to the turn signal connector on the taillight. The connector with the red and brown wire will be connected to the connector that operates the brake lights and running lights and will then be connected to that connector on the taillight. The con
  view full answer...


• Why Does Tow Ready Harness 118462 Need a 12V Power Wire Run to the Battery
  
• This is a common occurrence on many vehicles. Vehicle tail lights have changed over the years and they use less current than they used to. Trailer lights have not progressed as quickly. What could happen with an older traditional harness that does not have the added power source is that the trailer, with the older, less efficient lights and depending on the number of lights, could over draw the tail light circuits on the vehicle causing fuses to blow. Additionally if the trailer were to ever sho
  view full answer...


• Left Brake and Turn Signal Not Working On T-One Wiring Harness # 118462, 2007 Chrysler PT Cruiser
  
• I would begin by checking the tail light connectors of the T-One Vehicle Wiring Harness # 118462. I would also check the bulb if you have not already done so. Typically though, when the running light comes on, and the brake and turn signals do not work on one side, that is an indication of a ground problem. I would check the ground connection of the # 118462 harness. You will also want to check to make sure the tail light on the trailer has a good ground connection to a clean metal surface. I
  view full answer...