T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Tow Ready Custom Fit Vehicle Wiring - 118398

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.

Features:

• Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
  • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
• Connects quickly and easily - no cutting or splicing of wires
  • Locate connection points behind tail lights
  • Plug in T-connector
• Constructed of 16-gauge bonded wire
• Comes with dust cap for 4-way flat connector

Specs:

• Maximum amperage: 7.5 amps per circuit
• 1-Year limited warranty

Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove some interior carpeting and the tail light assemblies to access this harness.

Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.

It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.

118398 Tow Ready T-1 T-Connector - 4 Wire

This Product Fits The Following Vehicles

2007 - 2010 Pontiac G5 Pursuit 4-Door

2005 - 2006 Pontiac Pursuit 4-Door

2005 - 2010 Chevrolet Cobalt Sedan

2008 - 2008 Chevrolet Cobalt Sedan, except Sport

2005 - 2010 Chevrolet Cobalt Sedan, except SS

2008 - 2008 Chevrolet Cobalt Sport Sedan

2005 - 2010 Chevrolet Cobalt SS Sedan

Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...

Hitch Ball with 2" Diameter and Short Shank, 3,500 lbs GTW - Chrome $6.49

Sportframe Drawbar 2-1/8" Rise or 2-3/4" Drop 2000# Kit $21.95

Hitch Ball with 1-7/8" Diameter and Short Shank, 2000 lbs GTW - Chrome $6.49

Wire Frame Clip $0.17

1/2" Bolt Leader $1.05

Ask the Experts about this Tow Ready Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?

• Wiring a 2008 Pontiac G5 Sedan to be Towed Behind an RV
  
• To wire your Pontiac G5 Sedan to be towed behind a RV, you will need to use the Tail Light Isolating Diode System with Wiring Harness, item # 38955, which includes 4 diodes that keep the RV system from feeding back on the towed vehicles wiring. The diodes are wired inline with the towed vehicles left turn/brake, left taillight, right turn/brake and right taillight circuits. You could also use the RoadMaster Tail Light Wiring Kit with Bulbs, item # RM-155, which requires enough room in the tow
  view full answer...


• Which Trailer Wiring Harness Will Fit a 2006 to 2011 Chevy HHR
  
• We do have a wiring harness for the 2006 to 2011 Chevy HHR. Take a look at Tow Ready Custom Fit Vehicle Wiring, # 118407. I have included a link to the installation details and a video showing installation of the harness on a 2007 Chevy HHR. The T-One Vehicle Wiring Harness with 4-Pole Flat, # 118398, is not designed to fit the Chevy HHR. It is designed to fit compact Pontiac and Chevy sedans and coupes like the Cobalt.
  view full answer...


• Which Wiring Harness Fits the 2007 Chevrolet Cobalt Coupe VS the Sedan Model
  
• The correct Wiring harness for the 2007 Chevrolet Cobalt Coupe is the Custom Fit Trailer Wiring, item # 118407. This harness is designed specifically for the 2 door model. The T-One Vehicle Wiring Harness, item # 118398, has different connectors to match the connectors on the 4 door sedan models of the Cobalt.
  view full answer...