Custom Fit Vehicle Wiring > 2010 > Nissan > Frontier

2010 Nissan Frontier Custom Fit Vehicle Wiring Tow Ready 118263

Tow Ready Custom Fit Vehicle Wiring for the 2010 Nissan Frontier

Rating: rating rating rating rating rating
43 reviews

Code: 118263

Retail:$18.52

Price:$16.95

Shipping Weight: 1 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Trailer Wiring Harness Installation - 2012 Nissan Frontier - Video
Trailer Wiring Harness Installation - 2007 Nissan Frontier - Video

Replacement OEM Tow Package Wiring Harness with 4-Flat for Nissan - 2010 Nissan Frontier

Tow Ready Replacement 4-Way Wiring Harness for Nissan

Exact replacement for damaged OEM wiring harness
Installs in seconds on Nissan Frontiers not factory pre-wired
Connects directly to standard OEM connector
Fits the following:
- 2005 - 2012 Nissan, Frontier Pickup, w/Factory Tow Package
- 2005 - 2012 Nissan, Pathfinder, All Styles
- 2005 - 2012 Nissan, Xterra, w/Factory Tow Package
- 2009 - 2012 Suzuki, Equator, w/Factory 7-Way

118263 Tow Ready OEM Replacement Wiring Harness

Video of Replacement OEM Tow Package Wiring Harness with 4-Flat for Nissan

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video install trailer wiring 2012 nissan frontier 118263

Trailer Wiring Harness Installation - 2012 Nissan Frontier

Video wiring install 2007 nissan frontier

Trailer Wiring Harness Installation - 2007 Nissan Frontier

Video Transcript for Trailer Wiring Harness Installation - 2012 Nissan Frontier

Today in our 2012 Nissan Frontier, we'll be installing the tow ready T1 connector part number 118263. First, we'll need to locate the manufacturer's plug located on the inside of the drivers side frame rail. As you can see here, there are two plugs. We are going to remove the cap off the gray plug. Now with the cap removed we can go ahead and take our new inaudible harness and plug it directly into the manufacturer's wiring. As we install our plug we'll make sure, we have it firmly pressed into the connector and locked in place.

Now with the plug installed we can go ahead and run our wire over to the center of the hitch and secure it with some black zip ties. All right now with our wires secured we'll just go ahead and take our side cutters and cut back the excess in the zip ties. Now this will complete the install of our new tow ready T1 connectors part number 118263 on our 2012 Nissan Frontier.

2010 Nissan Frontier Owners Who Purchased This Custom Fit Vehicle Wiring Also Bought...

Ball Mount 3/4" Rise or 2" Drop, 7,500 lbs $17.20

Mounting Bracket 4-Pole Flat $3.59

Pin and Clip For Class III, IV and V Trailer Hitch Receiver $5.16

American Flag 2" Trailer Hitch Receiver Cover $14.95

Trailer Hitch Receiver Lock - Padlock Style for Class III, IV and V Trailer Hitch Receiver $12.99

Ask the Experts about this Tow Ready Custom Fit Vehicle Wiring

Installing T-1 Harness, Part # 118263 on 2005 Xterra Without Tow Package
In order to use the T-1 Harness, part # 118263 on an Xterra without the factory tow package, in addition to the relay, you will also need the jumper harness. The harness is a dealer supplied part. Once you purchase the T-1, the relay, and the jumper harness you will have spent quite a few dollars, when you could purchase the Hopkins Custom Fit Vehicle Wiring Harness part # 43605. You would spend a bit more time installing it, but it would probably be less expensive.
view full answer...

Trailer Wiring Harness Recommendation for a 2005 Nissan Frontier without Factory Tow Package
Since your 2005 Nissan Frontier did not come with a tow package, I recommend the Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit, # 119176KIT. This is a circuit protected converter that draws most of the power needed by the trailer from the vehicle battery rather than through the tail light wiring. I have included a link to the installation details and a video showing a typical installation for you to view.
view full answer...

Replacement OEM 4-way Harness for a 2011 Nissan Frontier Recommendation
If the window sticker of the 2011 Nissan Frontier that you are looking at says that it has the factory trailer wiring you should already have the Replacement OEM Tow Package Wiring Harness, part # 118263, that you referenced. This product is for people who have either damaged their OEM harness or had a Nissan that did not have the wiring from the factory. The truck you are looking at should already have a factory 4-way if its says it is pre-wired and you should not need this product.
view full answer...

Replacement OEM Tow Package Wiring Harness # 118263 for a 2007 Nissan Frontier
For your vehicle you will need a Replacement OEM Tow Package Wiring Harness, part # 118263. I am not sure what you bought at your local parts store but the # 118263 is designed to simply plug into the tow harness that is located underneath your Frontier. The harness on your 2007 Nissan Frontier is located under the vehicle, behind the rear bumper on the driver side, along the frame rail. See the picture to the right for further clarification. I attached installation instructions for this p
view full answer...

Providing 12-volt Accessory Circuit on a 2009 Nissan Frontier to Maintain a Trailer-Mounted Battery
Which trailer connector does the trailer use? Typically a 7-way connector is used on a trailer in the event that the trailer requires additional circuits other than the directionals, brake lights and running lights provided by the 4-pole connector. If the trailer has a 4-pole connector, the correct way to provide a 12-volt circuit to maintain the battery would be to remove the existing 4-pole connector from the trailer, and replace it with a 7-way like part # HM48500. The wire leading to the
view full answer...

Troubleshooting No Trailer Running Lights 2011 Nissan Frontier Using a Tow Ready 4-Way # 118263
The first thing I would check would be the tail light circuit of the Replacement OEM Tow Package Wiring Harness # 118263 that you just installed for voltage on the brown wire when the headlights are on. This will determine if the problem is in the truck or the trailer. If there is not voltage on the brown wire I would recommend that you check the connection of the # 118263 to your 2011 Nissan Frontier. Try unplugging it and inspecting the connector and then plug it back in snugly to see if th
view full answer...

Troubleshooting Trailer Tail Lights Not Working with a 2009 Nissan Frontier
If you are using the Tow Ready Wiring Harness, # 118263, you may need a relay that is available through a Nissan dealer. This wiring harness was designed to work on Nissan Frontier trucks that came with the factory tow package. If your 2009 Nissan Frontier did not come with a factory tow package, you will need to use a different harness. The correct harness is Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit, # 119176KIT. I have incldued a link to the installation det
view full answer...

Installation of Tow Ready OEM Tow Package Wiring Harness # 118263 on 2007 Nissan Xterra
If your 2007 Nissan Xterra has the factory tow package, you will use the Tow Ready Replacement OEM Tow Package Wiring Harness, part # 118263. This wiring harness will plug into the gray 6-pin plug, which is located under the vehicle, behind the rear bumper on the driver’s side, along the frame rail. With the factory tow package the OEM relay harness is normally already installed on your vehicle. You would only need to purchase the OEM relay harness from Nissan if your vehicle does not have a
view full answer...

Troubleshooting Non Functioning Trailer Running Lights with a Tow Ready OEM Wiring Harness
The first thing I would test would be the pin that the brown wire runs to on the 4-way of this Replacement OEM Tow Package Wiring Harness # 118263 for voltage when the running lights are activated on your vehicle. If there is voltage there with the running lights on then you know the problem is somewhere in the trailer wiring. I would recommend you trace the wiring back on the trailer looking for any corrosion or exposed wire and fix as necessary. If there was no voltage on the brown wire
view full answer...

Hooking Up Brakes On a Trailer w/4-Way To My 2007 Nissan Titan w/ 7-way
What you would need to do is replace the 4-way connector on your trailer with a 7-way connector. For this you will want to use Hopkins 7-Way, part # H20046. To install, you would begin by cutting off the 4-way connector and installing the 7-way. You will need to connect the appropriate wires from the 4-way to the 7-way (see linked Wiring FAQ). Then, you would need to run wiring from each brake assembly to the Blue Wire on the 7-way (see trailer brake video). Make sure that each brake assembly
view full answer...

No Power to Running Light Pin on 7-Way Vehicle Connector on a 2007 Nissan Frontier
If you are using the Tow Ready Wiring Harness, # 118263, you may need a relay harness that is available through a Nissan dealer. The relay harness will include the relays that are needed to safely run the running lights on your vehicle. The Tow Ready wiring harness was designed to work on Nissan Frontier trucks that came with the factory tow package. If your 2007 Nissan Frontier did not come with a factory tow package, you will need to use a different harness. The correct harness is Tow Ready
view full answer...

Comparing the Trailer Wiring Harness Options for a 2006 Nissan Frontier
The Tow Ready Wiring Harness, # 118263, is designed to fit your 2006 Nissan Frontier as long as it has the factory tow package. On the other hand, Hopkins lists the # 33525, as a fit for all models of the 2006 Nissan Frontier. From what we have found, though, if the vehicle does not have the tow package, you will still need a relay available from the dealer in order to allow it to function. If your Frontier does not have the tow package, I recommend using the Tow Ready Harness, # 118525, w
view full answer...

CURT Nissan Relay Recommendation for a 2010 Nissan Frontier
If you do not have the relays already installed in your 2010 Nissan Frontier you will need them to make the 4-way at the rear of your vehicle fully functional. You will want the Curt Relay Kit # C57000 to complete your trailer wiring. If you needed the entire kit including the relays and 4-way you would have wanted a Tow Ready Custom Fit Vehicle Wiring # 118525. I included installation instructions for this product for you to check out also.
view full answer...

Not Getting Power to the Factory Trailer Wiring on a 2007 Chevy Silverado
If you test the trailer connector on your 2007 Chevy Silverado and it is not providing power when the lights are on, that would indicate there is a problem in the tow package wiring and you will need to trace the wiring towards the front of the vehicle to see if there are breaks anywhere. If the problem is occurring on the trailer side, the problem could be a dirty or corroded trailer connector or a bad ground on the trailer at the connector or the lights. Grounds should be attached to clean
view full answer...

How to Determine if a 2009 Nissan Xterra has a Factory Tow Package to Add Trailer Wiring
The easiest and definitive way to determine if your 2009 Nissan Xterra has a factory tow package is to give the VIN to a dealership and have them determine what options it came with from the factory. A another way would be to use a circuit tester, like # 3808 if needed, and test the factory connection point under the vehicle. It should show signals when the brakes are applied, lights are turned on, and turn signals engaged. However, even if it shows signals it does not necessarily mean t
view full answer...

Parts to Install a 4-Pole and 7-Way RV Trailer Connector at the Rear of a 2008 Nissan Frontier
Since you already have a working 4-Way wiring harness installed on your 2008 Nissan Frontier you can install a 7-Way and 4-way electric trailer brake controller installation kit, # ETBC7, on your truck by utilizing the wiring you installed. Once completed you will have a working 7-Way RV connector and a working 4-Way connector at the rear of your Frontier. We have detailed instructions, see link, for installation of this kit, and we have a video that shows the installation of this kit on a 20
view full answer...

Running Lights Stopped Working on a Trailer Towed by a 2005 Nissan Pathfinder with Tow Package
It sounds like you may have a ground problem either on the trailer, on the Pathfinder, or both. A ground problem can cause the lights not to work properly. It can appear suddenly or gradually, and appears usually when the system is under load (running lights are on). First, make sure that the trailer side and vehicle side connectors are free of dirt and corrosion inside and in the backs of the plugs. You can then use a a circuit tester like # 3808 if needed to make sure the 7-Way has power o
view full answer...

Are Relays Required to Activate the Trailer Wiring Harness on a Nissan Frontier
On the Nissan Frontier and other Nissan vehicles, if the vehicle did not come with a factory tow package it will not have a functioning wiring harness even if one, like # 118263, is added. There will be relays that will need to be inserted to make the trailer wiring harness fully functional. If your Nissan did not come with a factory tow package, you would need to use wiring harness # 118525. This harness comes with the relays needed and the wiring required to make everything functional. I ha
view full answer...

Trailer Running Lights Not Working When Connected to a 2006 Nissan Frontier
First, you can verify if your 2006 Nissan Frontier came with a factory tow package by having a dealership run the VIN number to tell you what options it came with. If it did come with a factory tow package, it could be that the relays associated with the tow package running lights needs to be replaced. If it did not come with a tow package then that relay may be missing. You can check the locations of the relays in the owners manual. You can use a circuit tester like # 3808 if needed to test
view full answer...

Troubleshooting Taillights Not Illuminating on a Trailer Towed by a 2009 Nissan Frontier
It sounds like there is a short on the trailer and that is what caused the lights to stop working after a brief amount of time. If you plan on towing with this trailer again I would recommend you go over the wiring of the trailer looking for an obvious shorts in the circuitry and fix as necessary. I did some research out on the internet and read one post where a guy had your exact problem and he unplugged all of the trailer relays and harnesses and then plugged them back in and started workin
view full answer...