Hopkins Custom Fit Vehicle Wiring for the Nissan Frontier, 2004

Plug-N-Tow (R) Wiring Harness - Nissan Frontier, 2004

Plug-N-Tow (R) Wiring Connectors provide a no-hassle, quick and easy way to wire your Nissan Frontier.

• Each Nissan Frontier specific connector is pre-wired and uses original OEM connectors for water tight protection, a guaranteed fit, and a great look
• No cutting or taping
• 16 gauge wire
• 4-Pole connector includes dust cap
• Easy to follow instructions with pictures are included
• Converter load is a maximum of 2.1 amps per stop/turn signal (one turn signal on each side)

Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection point is located behind the rear bumper on the passenger side frame rail.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.

Hopkins # 43515

Nissan Frontier, 2004 Owners Who Purchased This Custom Fit Vehicle Wiring Also Bought...

Ask the Experts about this Hopkins Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?

• Where is the Connection for the 33515 Trailer Wiring Harness on a 2004 Nissan Frontier
  
• You will find a connection point for the Plug-N-Tow Wiring Harness, item # 33515, behind the rear bumper on the passenger side frame rail. This wiring harness has a converter installed and plugs in line with the original factory connectors.
  view full answer...


• Brake and Turn Signals Not Functioning when Taillights are Activated on a 2003 Nissan Frontier
  
• The situation you are describing sounds like a classic ground issue. When the tail lights are on the amperage draw is the greatest and if the grounding point chosen is not sufficient the lighting will not function properly. Since you have tried two harnesses from different manufacturers and have tried different grounding locations, I would try running the ground wire from the Tow Ready wiring harness, # 118362, to the negative post of the vehicle battery. If this solves the issue, you can try
  view full answer...


• Trailer Lights Not Working After Installing the Hopkins Trailer Wiring on a 2003 Nissan Frontier
  
• It sounds like the converter on your Hopkins wiring harness, # 33515, is not working correctly. The first step I would take is to use a circuit tester, like part # 3808, to check the trailer plug on the wiring harness for proper function without a trailer connected. If there is power there when the brakes, turn signals and taillights are activated, then you know that the ground for the wiring is not connected properly and you will need to check the vehicle connector and trailer wiring for suffic
  view full answer...


• Only Tail Lights on One Side of Trailer Work when Connected to a 2005 Nissan Frontier 7-Way
  
• The pop you heard could have been a relay that tripped related to the trailer wiring. Use the owners manual to find the locations of the relays related to the trailer wiring. I have also included a picture that shows a standard 7-Way configuration on a vehicle and on a trailer. You can check the wiring on the trailer to see if something is wired incorrectly. There could also be a bad ground. Make sure the trailer and vehicle side connectors are free of dirt and corrosion. Make sure the main g
  view full answer...


• Trailer Wiring Harness Recommendation for a 2000 Nissan Frontier SE 2 Door Extended Cab
  
• The Hopkins Plug-N-Tow Wiring Harness, # 33515, and the Tow Ready T-One Wiring Harness, # 118362, are very similar wiring harnesses. Other than the fact that they are made by two different manufacturers, the only difference between these two wiring harnesses is having the ability to disconnect the 4-way flat connector from the converter box on the Hopkins harness. My recommendation would be the Tow Ready T-One wiring harness. This wiring harness is more economical in price and will perform t
  view full answer...

Nissan Frontier Accessories