Quickly and easily install a 4-way trailer connector on your Honda Accord with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Circuit-protected converter guards against shorts.
This custom-fit T-One connector plugs into your Honda Accord's wiring harness, which is located inside your trunk, behind the driver's-side tail light. You will need to remove some interior trim or carpeting to access this harness.
Once installation is complete, the 4-way flat connector will be stowed within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
Circuit-Protected Tail Light Converter
A tail light converter is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your Honda Accord's three-wire system need to be combined so they are compatible with the wiring system of your trailer. The tail light converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your Honda Accord operate.
This converter safeguards itself and your Honda Accord against possible electrical shorts and overloads with integrated short circuit protection. Just install the connector as indicated and rest assured that the wiring system of your Honda Accord will remain feedback-free.
Average Customer Rating: 4.6 out of 5 stars (5 Customer Reviews)
by: Corey R.05/17/2013
Simple installation. 80733
by: Gail in MT10/20/2012
This hitch was good quality but I had to force the arms open an inch to get to fit. A lot of work. Instead of taking a couple of hours, it took five hours. 57758
by: John P.09/11/2012
Easy 5 minute hook up. 54228
by: Walt K.08/30/2011
Perfect/easy fit. 23171
exellent thank you 14716
Ask the Experts about this Draw-Tite Custom Fit Vehicle Wiring
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.Let us know if anything is missing or if you have any questions.