T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118515
Retail:$112.03
Our Price: $81.75
You Save: 27%
Confirmed to Fit
2013 Ford Edge
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (184)
- Q & A (0)
- Photos
2013 Ford Edge - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your Ford Edge with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points behind tail lights
- Plug in T-connector
- Run hot lead to car battery
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 4.2 amps per circuit
- Tail lights: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed within your trunk or rear cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118515 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not arrive in time
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118515
Average Customer Rating: 4.8 out of 5 stars (184 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: William 02/06/2024
Excellent product and installation inst ructions
by: Erik B07/23/2014
2013FordEdge
Wiring was straightforward, exactly as in video and quite easy. It was not hard at all to modify install and run the wires on the interior inside the door sills instead of zip tied underneath the vehicle. Also easily added the wiring adapter to the hitch for a clean look. I wouldn't hang the wires, pinched under the back door, not when it was this easy to add the mount and adapter. Either get the flat mounting bracket or upgrade to the dual as I did.
by: Matt04/27/2022
Installation of this wiring harness on my 2013 Ford Edge was fairly easy, the install video provided by etrailer.com was easy to follow and gives a step by step process. Instead of running the main power wire under the vehicle I chose to run it inside. The wire tucked nicely under the panels along the driver side, there’s a grommet that goes right into the engine bay above the pedals under the driver side fire wall. Also opted for the adapter #37175 to avoid running the 4 pole flat wire under the tailgate. The install for the wiring harness took approximately an hour
by: Ken09/06/2023
Was pretty easy to install with help of the online videos. Did have to make a slight alteration as I could not get the plug thru the passenger side opening on my particular model.
by: Kent 04/13/2024
Superb customer service! Never seen be tter!
by: Honest TJ01/19/2023
T-One wiring harness was the best purchase I could invest for my vehicle. etrailer has great prices and was pleased their website listed qualify wiring installation companies. etrailer will continue to be my go to for anything relating to vehicle wiring or lighting.
by: David01/25/2023
2014 FordEdge
Bought my 2014 Edge new with a hitch but no wiring harness (bike rack only). Over time came to realize I could really use the wiring harness. Did an Internet search, etrailer came up, found the harness I wanted, the video was the clincher for me. I'm a DIY'er but not so much on cars. Followed the video instructions, even bought the silicon sealer and tester. I ran the battery wire under the car and this was the only challenge for me as I do not have a lift, so laying on my back on a cold winter day took a bit longer than expected. Product delivery was prompt, fair price, very happy with this purchase.
by: George12/08/2019
I actually haven't installed the wiring yet. Hitch is solid tho
by: Rod05/20/2021
I bought my "made to fit" hitch and wiring from you a year ago. It was the second time I bought a hitch and wiring from you (I traded that vehicle for this one). I both cases the hitch and wiring fit right, worked right and were easy to install using your video tutorials. You all do a great job over there. Keep up the good work. Ok...one suggestion only: the hitch for my old Saturn Vue came with a rubber cover for the receiver but the one for my Ford Edge didn't so I bought one at [outdoor and homegoods store]. I suggest always including one with a hitch. Thanks again for being a solid, reliable company with good products that work as advertised.
by: Kenneth 07/22/2021
Although I have not installed this yet, I will rate excellent based on prior experience. This is the 4th hitch & wiring from Etrailer in the past 8 years that I have purchased and installed. 2 for my cars, one for a relative and one for my fiancee. All have been easy to install, excellent quality, with superior support and service.
Ken
7/23/2022
Fantastic. Love it. This is the 4th I purchased and installed.
by: Mike N.06/29/2013
My order arrived quickly, (3 days) was correct and installed exactly as in the video! I did choose to route the power wire internally and slipped it through the firewall alongside the factory wiring harness. Start to finish took about two and a half hours for the hitch and wiring. Excellent service, quality and instructions! I would definitely recommend etrailer, and will use them again for my next hitch.
Mike N.
12/28/2014
One year later everything still works perfectly. Ive towed half a dozen different trailers with no issues.
by: Chuck 07/09/2023
Great products, and quick shipping. Always available if you have any questions.
by: Harry06/29/2014
Wiring harness has been installed and tested with the trailer. No problems with either. I am disappointed that the instructions say to run the trailer end of the wiring out of the vehicle through the tailgate gasket when there is a more professional way to easily get the flat connector outside with no worry about pinching the wiring in the tail gate opening.
Harry
6/29/2015
JU=ust fine, no problems with several uses for over a year
by: Robert L.01/20/2014
2013FordEdge
This is the second time I've used etrailer.com, and frankly, I'm blown away at how great this place has been in 1) having what I need and 2) delivering it more quickly than they promise. etrailer is neck and neck with Amazon in ease of use and delivery (in my opinion), and that's really saying something.
As for this particular product, I'm very pleased. It was delivered as seen in the pic and was relatively simple to install. The only downside was that the screw used to afix the ground wire was missing from the package, and the instructions were lacking -- in fact, they miss the final step of the installation.
Again, I'm very happy with my experience and will use etrailer.com for any and all of my future needs.
Robert L.
1/20/2015
Everything is still great, Patrick. Thanks for checking in.
by: Nathan 05/23/2023
FordEdge
This harness fit my Edge like a charm.
by: Tom 09/10/2022
This wiring harness made the install a one man job. Very easy to do and made the wiring super simple. Worked right the very first time. Instructions were very concise and easy to follow. I put this on a 2014 Ford Edge Sport.
by: Steve01/08/2012
2012 FordEdge
I Limited version of the 2012 Edge and while the left-side installation was easy, the right-side would not snake throgh the sidewall between the chasis and the interior side panels due to the sub-woofers use of the same space. I ended up cutting the red and green wires about 4ft from the T-connector and using butt-terminals and shrink wrap. I took the opportunity to add a protective sheath over the wire all the way back to the light assembly. Also, the instructions don't tell you that the two plastic trays in the cargo area are easily lifted out. They are kept in place by a few guide pins. The hardest part is running the wire from the battery back to the control module. The instructions want you run the wire through the interior of the car, but I added about 16ft. of protective sheath and ran the wire behind the battery, down the fire wall and along underside of the chasis. There is a plastic rock guard that runs down the drivers side and I tie-wrapped the wire above that. From the underside of the car, you can't see the rubber gromet that is above the left-rear heat shield. Just send a fish down from the cargo bay and pull the wire through. Works great and I'm glad to know that the car's electronics are separated from the trailer wiring.
by: Tom M.08/08/2014
2012 FordEdge
Before ordering, I read the other reviews and people were all very impressed with this wiring kit. I must say that I agree, the fit, cable lengths, and quality of the harness is excellent. I also appreciated the video on this website that showed the installation process in a vehicle like mine. Very nice that it fits into the manufacturer's wiring by just plugging in and not having to splice wires, so there was little chance of connecting the wrong wires or of them not being a solid connection. Wiring the power line to the battery was the hardest part, but not too bad. I ran the line through the passenger compartment under the rocker panel trim and then fished it into the engine compartment even though the directions said to route it underneath the vehicle. I also routed the 4 pin trailer connector down under the car by the trailer hitch where the instructions said leave it inside and let it dangle out the hatch when in use. These were a couple of things that made my installation a little neater and cleaner. I wouldn't hesitate to order one of these again!
by: Michael J.S.05/09/2013
This wiring harness was so easy to put in. I don't do wiring. I get others to do it for me. But there was no one around to do it . It took me about 45 min it was plug and play I only wish all my jobs where that easy Thank you
Michael J.
5/9/2014
It is great it was easy to put in and worked great since Ive had it
by: Marshall10/19/2016
2013FordEdge
Folks, I received my hitch (Draw-Tite 75992) and my wiring harness (118515) the other day, the box wasn't in the best of shape however, the contents were in good shape. I utilized the matched video to install both hitch and harness with ease. It took me about 2 hours and 15 minutes for both and really enjoyed the installation. The bolt guides designed to thread the hardware through the frame were geniuos and made the process easier. This hitch assembly works great with my tent trailer and utility trailer. I give these products a five star rating and would recommend to everyone. Thank you, Marshall
by: Lew04/01/2022
Follow directions. It is an easy install. Just takes time.
Lew
4/2/2023
Works great every time I hook my trailer wiring. No issues, just works
by: Joseph 07/12/2023
Perfect fit. Easy install. Looks and fits great.
by: Dave D.09/30/2013
2013FordEdge
The product is good. Installation is a bit of pain. 4 Stars because my kit was missing the sheet metal screw as well. Really not a big deal, especialy since I had a bunch laying around.
I found installing the hitch iteself, without a lift or ramps, easy. I found having to try and snake the power cable from the battery to back of the truck, without a lift or ramps, a pain. That is not really a fault of the product, and I guess if I wanted to I could have pulled trim and run it inside the truck. Other than that, easy install.
by: Dan S03/18/2015
2011 FordEdge
The wiring harness is a quality product and the installion was very straight forward after reviewing the video. I opted to run the power wire inside the vehicle under the door thresholds and I also ran the four prong out through the gromet near the left side of the spare tire. I then secured it with plastic ties around the Hidden Hitch and added a mounting bracket (which came with self tapping screws) to the hitch.
by: sarge07/16/2017
2014 FordEdge
I recently had to give up my old Mountaineer and got a newer 2014 Ford Edge. I needed a trailer hitch for my hitch haul for deer, extra luggage, and occasional trailer towing for short trips. Installed cost for a hitch and wiring went from $500 to over $800 from Ford. I searched the web and found that I could purchase a Draw Tite hitch for around $100 I paid $70 to have it installed because at 72 I do not have access to a hoist. I purchased the wiring harness and installed it myself thanks to your videos. The only problem was to get this 72 year old rear underneath the vehicle to run the power lead. Job complete. I have decided to order a trailer hitch for my wife's MKX for the hitch haul only and not for deer.
25
184
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Can the Custom Fit Trailer Wiring Harness # 118515 be used on the 2011 Ford Edge SELThe Tow Ready Custom Fit Vehicle Wiring Harness, # 118515, will install inline with your 2011 Ford Edge SEL tail light wiring connectors and power for the trailer lighting will be supplied by the vehicle battery, only requiring a few milliamps of draw on the vehicles circuitry for activation of the trailer lighting signals. You will not need to install a separate fuse panel, larger fuses or any other harness for trailer lighting with this harness. The trailer wiring the Ford dealer is...
view full answer... - Does Powered Liftgate of 2013 Ford Edge Interfere with Install of Trailer WiringThe powered liftgate of your 2013 Ford Edge would not be an issue at all when installing the trailer wiring kit part # 118515 that you referenced.
view full answer... - Will Tow Ready T-One Trailer Connector and Circuit Protected ModuLite # 118515 Fit a 2011 Ford EdgeI checked the Tow Ready website and called and spoke to my contact to verify and both indicated that the T-One Connector w/Upgraded Circuit Protected ModuLite, # 118515, will fit the 2011 Ford Edge. It was specifically designed for and tested on 2011 models. I have included a link to the installation details for reference.
view full answer... - Can 12V Outlet in Rear Of 2014 Ford Edge be Used For Trailer Wiring Harness PowerThe problem with using the 12V outlet at the back of your 2014 Edge is that the outlet is on a fused circuit. If the fuse would blow you would not have trailer lights and you would not know it. It can be a bit tough to run the power lead wire to the positive battery post but it really is the only way to be sure you have power to your trailer connector. The trailer wiring harness I recommend is part # 118515. I have attached a link to an installation video for this harness on a 2014 Edge...
view full answer... - Parts Needed to Convert a 4-way to a 5-way on a 2011 Ford EdgeTo get a 5-way flat connector on your 2011 Ford Edge you are going to need to install the Tow Ready Custom Fit Vehicle Wiring # 118515 and then install a 4 Pole to 5 Pole Trailer Wiring Adapter # 20036. The # 20036 will plug into the 4-way of the # 118515 and then you will run the blue wire to the reverse light circuit of your vehicle and you will have a fully functional 5-way. You might need a circuit tester like our # 3808 to find the correct wire to tap into. Check out the installation...
view full answer... - Install Tip for Getting Connectors of Trailer Wiring for 2012 Ford Edge Out to Light AssembliesIf you check out the install video I attached (at the 1:00 mark), you can see our installer using a length of air tube fed down to the interior of a 2012 Ford Edge like yours so that he could then attach the wire connectors of the # 118515 to it and then pull it back up. Using this method will make installing the harness possible on your vehicle.
view full answer... - Trailer Wiring Harness T-Connector for a 2014 Ford Edge SportYes, I checked with Tow Ready and they do list the T-connector trailer wiring harness # 118515 as a fit for the 2014 Ford Edge, all models, including the Sport models. I have included a link to a video showing an installation of the harness on a 2013 Edge which will be nearly identical to your 2014. I have also linked the instructions.
view full answer... - Does Power Wire for Trailer Wiring Harness have to Go to Battery on a 2013 Ford Edge SEThere are several reasons why you are not supposed to use any other power source to install a powered trailer wiring harness such as # 118515. First, attaching the wire to the vehicle battery is part of what gives the circuit protection between the vehicle and trailer wiring. If that wire is installed anywhere else you will lose that protection. Second the converters are not tested with or rated for a connection to any other power source. Installing it in a manner different from the instructions...
view full answer... - Wiring Recommendation For 2013 Ford Edge To Tow A TrailerI am happy to get you the parts you need to tow the U-haul trailer, the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118515 is a custom fit vehicle wiring harness for your 2013 Ford Edge so it will not require splicing into the vehicle wiring. I have attached an installation video for your reference. It sounds like you are asking if the 4-Pole Flat will connect to the U-Haul trailer, if the trailer just has lights without brakes then you need the 4-Pole...
view full answer... - Trailer Wiring Harness Recommendation for a 2014 Ford EdgeThere are several trailer wiring harness options available for the 2014 Ford Edge. I recommend T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Item # 118515 though because compared to the other options we hear about fewer problems with the Tekonsha brand. All of the harnesses install in the same way and provide the same functions but the Tekonsha harness is the best mix of quality and affordability for your Edge. I have linked a video showing an example installation of...
view full answer... - Availability of a 4-Pole Trailer Wiring Harness for 2011 Ford Edge SEL AWDFor your 2011 Edge, I'd recommend the Tow Ready vehicle wiring harness, part # 118515. The wiring harness plugs inline with the connection between the factory wiring harness and the vehicle taillight assemblies. You'll need to run one wire under the vehicle up to the positive battery terminal. I'll link you an FAQ article and an install video that you might find helpful.
view full answer... - Do All Trailer Hitches For 2014 Ford Edge SEL Require DrillingI can understand not wanting to drill holes to mount a hitch, though the Draw-Tite # 75728 is only a fit the Sport model and will be unable to fit your 2014 Ford Edge SEL. I did double check with the manufacturer for you just to be certain. So to add a hitch to your '14 Edge SEL you will need to drill 17/32" holes in your frame rails for installation. Drilling to install a hitch is something that is pretty frequent and a lot of people do, even in areas there is bad weather, and you can...
view full answer... - Hitch Recommendation for a 2014 Ford Edge LTDBoth the Hidden Hitch part # 87682 (no longer available) and the Draw Tite Hitch part # 75992 will install in the same way. Both hitches are made by the same company and actually share the same installation instructions. No matter what hitch you install on your 2014 Ford Edge you will need to remove the support bracket. I can assure you that Draw Tite is very rigorous in how they test their hitch installs and if there was any risk that the fascia would get deformed they wouldn't advise...
view full answer... - Is Any Fascia or Bumper Trimming Required to Install a Trailer Hitch on a 2011 Ford Edge SportWhen installing Draw-Tite trailer hitch # 75728 on a 2011 Ford Edge, there is no trimming of the rear fascia, bumper, or diffuser. You will only need to trim some heat shields under the vehicle in order for the hitch to fit properly. I have included a link to the installation instructions for you to view. If you plan on doing some towing I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For trailer wiring,...
view full answer... - Trailer Wiring Harness Recommendations for 2013 Ford EdgeTo install a 4-pole trailer connector on your 2013 Ford Edge, I'd recommend the Tow Ready # 118515. This wiring harness does have a direct connection to the battery, this is done for a good reason. Years ago, you could tap into the taillight circuits to power your trailer taillights. The wires were of sufficient gauge so that plenty of power for both the vehicle and the trailer taillights could be drawn through the vehicle's taillight circuits. Now, due to cost restraints, the automobile...
view full answer... - Trailer Hitch that Requires Minimal Trimming to Install on a 2013 Ford Edge SportDraw-Tite trailer hitch # 75728 that you have referenced fits the bill perfectly. You will not have to trim the fascia, only tuck it out of the way, as indicated in the instructions that I have linked for you on the right. The only trimming involved is on the heat shields and this is the case for all of the hitches for your 2013 Ford Edge Sport. If you plan on doing some towing I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip,...
view full answer... - Replacement 4-Way Wiring Harness For a Damaged Power Converter On a 2011 Ford EdgeIt does sound like the converter went out on your Curt Harness # C56120. Do be sure to check the main power wire and fuse that runs to the battery. If this is damaged it would also cause the same issue but all the lights would fail to operate if the wiring or fuse is damaged. I recommend replacing it with a Tekonsha T-One Vehicle Wiring Harness # 118515 as I have found in my experience that the Tekonsha's use a better power converter and have less issues down the road than other brands.
view full answer... - Hitch Recommendation for a 2011 Ford EdgeI would recommend the Draw-Tite part # 75992. This hitch has an e-coat base and is powder-coated on top of that for superior rust prevention over other hitches that only have powder-coating. This hitch is also a Class III 2 inch hitch that will give you more towing capacities and accessory options than a 1-1/4 inch hitch. I attached an install video for you to check out as well. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with...
view full answer... - Will Only the Receiver be Showing on Draw-Tite Trailer Hitch for a 2013 Ford EdgeYes, only the receiver on Draw-Tite trailer hitch # 75992 will be visible after installation on your 2013 Ford Edge. Take a look at the picture I have included that shows the hitch installed. I have also linked the instructions for you. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch...
view full answer...
- Non-Intermittent Power On Trailer Turn Signal Circuit for 2013 Ford Edge with Curt Wiring Harness If you have a constant signal when testing the right hand stop/turn pin on the trailer side trailer connector then we know there is an issue with the vehicle or wiring harness. The next step I recommend you take is test the right hand turn signal wire that leads into the converter box. If all is normal here then we know the wiring harness is bad and will need to be replaced for which I recommend the T-One Vehicle Wiring Harness part # 118515 as it is a more reliable option than the Curt...
view full answer... - Trailer Hitch Recommendation for a 2011 Ford EdgeThe Hidden Hitch part number 87604 that you referenced has been replaced by the Draw-Tite part # 75992 so that would be the hitch you would want. I attached an install video for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a...
view full answer... - Tow Bar Lighting Solution for 2013 Ford EdgeFor tow bar lighting for your 2013 Ford Edge you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV. Then for trailer wiring you'd want the part # 118515 which installs...
view full answer... - Adding a Trailer Wiring Harness to a 2013 Ford Edge that Already has a Tow Bar Wiring HarnessWhat you can do is install Tow Ready trailer wiring harness # 118515 on your 2013 Ford Edge. You will basically be daisy chaining its connectors in line with the # HM56001 and vehicle wiring connectors. I spoke with our shop manager to verify that this will work and he said that it would! Installation of the trailer wiring harness does require a direct connection to the vehicle battery (to power the trailer lights). I have included a link to a help article with tips on routing the power wire.
view full answer... - Trailer Hitch and Wiring Recommendation for 2014 Ford EdgeFor your 2014 Ford Edge the hitch you would want for towing is the Draw Tite part # 75992 which is a confirmed fit and has plenty of towing capacity. It's a 2 inch hitch which is the most popular size for towing products so it's the best choice. I attached an install video for you to check out as well. It comes with all needed install hardware as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Brent H
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rod
5/21/2022
Isn't working. I believe it is wired correctly but not getting the functions to work at the 7 blade except one that lights the tester up and stays on. Have not tried to diagnose yet.