bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Dodge
  3. Ram Pickup
  4. 2013
  5. Tekonsha
FITS 2013 Dodge Ram Pickup
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118384
Our Price: $41.94
Custom Fit Vehicle Wiring
Confirmed to Fit
2013 Dodge Ram Pickup

1500 with factory 7-Way

2500 and 3500 Pickup with factory 7-Way

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 0.73 lbs
Add to cart
In Stock
Tekonsha Custom Fit Vehicle Wiring - 118384
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Tekonsha custom fit vehicle wiring for your 2013 Dodge Ram Pickup are available from etrailer.com. Installation instructions and reviews for your Dodge custom fit vehicle wiring. Expert service, and great custom fit vehicle wiring prices. etrailer.com carries a complete line of Tekonsha products. Order your T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part number 118384 online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (445)
  • Q & A (0)
  • Photos

2013 Dodge Ram Pickup - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • No Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your Dodge Ram Pickup. This T-One typically plugs directly into the back of your factory-installed 7-way connector so you can retain the 7-way and also pull a trailer that has a 4-pole flat.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Retains functionality of factory-installed 7-way, RV-style connector (if present)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points behind rear bumper
    • Plug in T-connector
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the rear bumper. If you have a factory-installed 7-way, blade-style connector, the T-One will plug in between the 7-way and the OEM socket.


Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.



118384 Tow Ready T-1 T-Connector - 4 Wire

Installation Details 118384 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118384

Average Customer Rating:  4.8 out of 5 stars   (445 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle. This T-One typically plugs directly into the back of your factory-installed 7-way connector so you can retain the 7-way and also pull a trailer that has a 4-pole flat.

by:
2011 Chevrolet Silverado

I used this harness to add a tailgate strip light to my 3011 Silverado. The whole process including installing the light strip took 45 minutes. The harness plugged in in minutes and works beautifully.



by:
2013 GMC Sierra

Have been looking for a T-connector for my trailer lights for two years. Truck has a seven pin connector built-in. Wanted my GMC emblem to light up when the breaks are applied. Was getting ready to cut and splice wires when I looked on the internet and learned about etrailer.com. Found the T-connector I needed. Took 5 days to arrive after ordering, and 5 minutes to install. Works great !



by:
2012 Toyota Tundra

I have a 2012 Toyota Tundra and I recently bought a pre-owned Leer camper shell. I used this harness to wire up the third brake light. I also used the brake light module. This setup worked perfectly and resulted in a neat and clean professional installation. Thanks etrailer, you had everything I needed for a successful prefect installation.

Ron G.

7/13/2023

I installed this unit on my truck one year ago. It was perfect then and it is still working perfectly without issue.



by:

Slow start to a good impression but everything worked out.
1. It started with a delivery delay; I live two hours from the manufacturer but it took 3 weeks to get me my harness. When the error was found they over-nighted the harness to me.
2. The wiring in the harness was loose and would lose connection, disabling the lights. Pushing a connector back in to place, crimping it down and wrapping it in electrical tape solved that issue.
That was a month into owning the harness. It's been a year now and I've had no problems. I'm pleased with the compatibility and ease of which it took to install.

Don M.

5/11/2023

The harness has held up great. Needed no adjustments after original installation.



by:
GMC Sierra

Perfect fit for 2022 Sierra GMC . This leaves your 4 pin vacant to plug in your boat trailer etc



by:

Exactly as described, wires in nicely, has been working flawlessly since the installation!



by:
2016 Jeep Grand Cherokee

Purchased this hitch for my new 2016 Jeep Grand Cherokee Laredo online after being quoted a $700 installation price at my local Chrysler Dealership. After doing some online searching and reading multiple reviews I decided to give these folks a try. My husband and I watched a very detailed video explaining 3 different hitch options for my Jeep and quickly decided for the price it was worth giving it a try. From opening box to install was less than 20 minutes that included connecting trailer light kit that I purchased extra $$.$$. You can barely see it under my JEEP. I'm very pleased and can't hardly wait to use it. Thanks again etrailer.com you helped me prove my to my husband that it would work and saved me $600!



by:

Search hi and low to find what I needed or even for someone who even understood what I needed. I had no luck until I search on etrailer.com. They had exactly what I was looking for. Ordering was simple and delivery was quick. They even check in with me before durning and after shipping. I love this site. I'll definitely shop here first next time.



by:
2016 Jeep Grand Cherokee

I purchased a trailer hitch (C13182) and wiring adaptor (T-One 118384) for my 2016 Grand Cherokee. Received it within a few days and fit was perfect! Only took all of ten minutes to install with the help of my 5 year old. Thank You!



by:
2014 Jeep Grand Cherokee

Bought a trailer hitch, and wiring harness for my 2014 Jeep Grand Cherokee. etrailer was fantastic, right on the money with the videos and it was very helpful in choosing the right hitch. Very easy to install.



by:
2014 Jeep Grand Cherokee

Fit just like it should, engages securely and performs correctly. Nothing else I can ask for



by:

Website very easy to operate and fubd exactly the right part to fit my truck/trailer !!! Videos were very helpful even telling me what sockets and wrenches I needed to complete install by myself and Im a carpenter not really mechanically gifted. Will definitely use etrailer.com again without hesitation!!



by:

TRAILER WIRING HARNESS WENT TOGETHER REAL GOOD. IT ONLY TOOK A VERY LITTLE TIME TO INSTALL. THIS MADE INSTALLING MY LED BRAKE LIGHT KIT VERY EASY.



by:

World class customer service



by:

Always worked for me when purchased in the past so I didn't expect anything less this time.

Reginald W.

8/20/2023

Ive had no problem with this item even thru a harsh winter use. Just make sure you use a little diox grease on the electrical pins so moisture doesnt ruin the contact

Etrailer Expert

Mike L.

9/13/2023

@ReginaldW Good advice, dielectric grease like # 11755 does a great job of keeping moisture out of your electrical connections.


by:

great trailer hitch at fair price.



by:

Fit perfectly, and the [online] video was very helpful



by:

Easy to use web site - got the correct part - I have already ordered more parts - this time for my trailer!!! I will always choose etrailer for my parts

Frank

1/30/2023

It was so easy to install and I have not had any issues with it. Best add on I ever added!!!



by:

Works perfectly



by:
2022 Ram 1500

OEM quality, plugged right in as advertised. My second purchase of a harness of this type from etrailer for a new vehicle, and will do so again.



by:

Installed myself in about 30 minutes. 06 Silverado crew cab. Fit right up to factory fitting that was hidden up on top of the spare tire.



by:
2015 Jeep Grand Cherokee

Super easy installation and the addition of the 7 pin means that it is upgradeable. Perfect for me.



by:

Excellent product and easy to install! Finished up the installation with products 118144 and 118140 for a clean looking install.



by:
2017 Jeep Grand Cherokee

I recently purchased a new 2017 Jeep Grand Cherokee. However, the vehicle was not equipped with with a trailer hitch but came pre-wired for trailering. I asked if the dealership could install a hitch/wiring and was informed that they subcontract the work to a local trailer rental company. I went to the company and was told it would cost approximately $400 and I would have to leave my vehicle with them for four hours, which would have been very inconvenient because I live 50 miles away. As a result, I researched alternatives online to see if I could install the hitch and wiring myself. etrailer.com had the best customer reviews and help videos, so I placed an order for the hitch and wiring harness. My wife and I installed them yesterday, which took about an hour. I saved $270 from what the trailer company was going to charge me. Very happy with the purchase.

Gary G.

4/28/2018

Working fine.



by:
2014 Jeep Grand Cherokee

It is so easy-to-install


25
445
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • How to Troubleshoot Intermittent Malfunctioning Left Turn/Brake Signal on Trailer
    Because it sounds like you're describing an intermittent issue, you're most likely dealing with a poor ground connection. It's lot likely the main trailer ground on the trailer tongue is the problem since it's only happening on one circuit, but it's worth checking to make sure the ground wire from the trailer connector is securely fastened and isn't corroded. The ground for the left turn/brake lamp is where you'll most likely find the problem. Trailer taillights either ground by their mounting...
    view full answer...
  • No Left or Right Trailer Stop/Turn Trailer Signals on a 2010 Chevy Silverado 2500
    If you have no trailer stop/turn signals, left or right on a 2010 Chevrolet Silverado 2500, you'll first want to start with taking a look in your owner's manuals for the correct fuse location. I went ahead and did this for you, the #1 fuse location is for the right trailer stop/turn and the #3 is for the left trailer stop/turn in the underhood fuse block. If the fuses are good the next step would be to inspect the terminals inside the trailer connector to be sure there is no corrosion....
    view full answer...
  • Drivers Side Brake and Turn Signal Lights Not Working on a 2012 Ram 3500 4x4 Cummins Diesel
    When a light is only working periodically that is usually an indication of a weak ground connection or a loose wire. But on a newer truck like your 2012 Ram 3500 this does not seem likely. The trailer connector having power is not surprising. That means that the trailer wiring is independent of the truck lights. I would start at the front and work my way back. You could have something going on with the fuse and/or relay (if equipped) on that side. Use the truck owners manual to find all...
    view full answer...
  • Troubleshooting 2008 Chevy Silverado 2500 Where 12 Volt Circuit on 7-Way isn't Active
    There are a couple connections you need to make under the hood of your 2008 Chevy 2500HD to allow the 12 volt accessory circuit of your 7-way to activate. If you check out the help article I attached and then scroll down to the section titled "Finalizing Connections for the Brake Controller" you'll see the entire process outline.
    view full answer...
  • Adding 4-Way Flat to 2000 Chevy Silverado with Factory 7-Way
    Since your 2000 Chevy Silverado is equipped with the factory 7-Way connector all you will need to add a 4-Way is the Tekonsha T-One Wiring Harness # 118384. This will plug right in-line with the 7-Way (no splicing, cutting, etc) to provide you with a 4-Way flat that you can use for your new light bar. Because of how it installs it will also retain function of the existing 7-Way. I have attached an installation video that you can use for reference as well.
    view full answer...
  • Troubleshooting Service Brake Controller Message on Ram 3500
    Here's what I was able to find for error messages similar to what you listed for a Ram truck: SERVICE TRAILER BRAKE SYSTEM: This message will display when there is a problem with the ITBC system. If this message continues over multiple ignition cycles, there is a problem with the ITBC system. Have the vehicle serviced. First thing I would check though is for corrosion on the trailer wiring connector as that's the most common cause of brake controller issues. Clean the pins with sandpaper...
    view full answer...
    Image 1 for
  • No Brake or Turn Signals With Trailer Wiring Harness On a 2007 GMC Acadia
    I am not sure which exact trailer wiring harness you are using but if you have one that plugs into the factory tow package plug like the T-One Vehicle Wiring Harness part # 118384 for example then the issue you are having would lead me to believe that you are missing some fuses/relays or they are blown. I took a look in your owner's manual and it lists two fuses for the stop/turn signal lights, "LT TRLR STOP/TRN" for the left stop/turn circuits and "RT TRLR STOP/TRN" for the right stop/turn...
    view full answer...
  • Trailer Lights Do Not Light Up When Connected to 2007 Subaru Outback with Working Wiring Harness
    Since the new wiring harness on your 2007 Subaru Outback has power the issue must be on the trailer side. It does sound like a ground issue. There are numerous grounds on a trailer so there are a few places to check. Make sure that the vehicle side and trailer side connectors are clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces. The light grounds should also be attached to clean and corrosion free...
    view full answer...
  • Locating 12V Trailer Battery Fuse on 2016 Ram 2500
    Based on my research there should be a pink 30 amp fuse located at the F30 position inside the power distribution center under the hood of your 2016 Ram 2500. This fuse is connected to the 12V power circuit on the factory 7-Way so you will want to make sure this fuse is present and in good condition. Please just let me know if you still don't get power at this pin after replacing the fuse and I will be happy to look into this further.
    view full answer...
  • Installed 7-Way and 2012 Jeep Grand Cherokee Dealer Reprogrammed But No Brake Lights/Turn Signals
    If your 2012 Jeep Grand Cherokee did not come with a factory installed 7-Way then if you plug one into the wiring at the back of the Jeep the 7-Way would not function. Like you already did, you would go to the dealer and have them reprogram the computer to get the newly installed 7-Way to function. If everything was installed properly then it should work. If not then they may have made a mistake in the reprogramming process. Or, it could be that there is a fuses or fuses or even relays...
    view full answer...
  • From End to End How Long is the Wire of the 4-Pole Trailer Adapter GM trucks 7 Way, part # 118384
    I went out into our warehouse and measured one of the 4-Pole Trailer Adapter for GM trucks with Factory 7 Way, part # 118384, that we had in stock and it measured 41 inches from the end of one connector to the end of the connector on the opposite side.
    view full answer...
  • Installation Instructions for the Tow Ready 4-Pole Harness for a 2010 Toyota Tacoma
    Under the rear bumper, near the driver side of your 2010 Toyota Tacoma there will be a plug with a cap on it that you will remove and plug the 4-Pole Trailer Adapter # 118384 into. I attached installation instructions and video for this product for you to check out that shows you how to install it.
    view full answer...
  • 'Will 118384 T-connector Pass All Tow Package Circuits Through to Trailer
    The Tekonsha # 118384 plugs inline between the factory tow package harness and the factory 7-way trailer connector. All the lighting functions, the 12-v feed and the brake controller output will indeed be passed through to the 7-way trailer connector.
    view full answer...
  • Keep Blowing 20 Amp Running Light Fuse when Connecting Trailer to 2012 Ram 5500
    There is a short circuit somewhere that is causing the fuse to blow. A short would cause excessive power draw. Since it only happens when you plug in a trailer it is likely that the short is in the trailer connector or the wiring to it. You will need to make sure that there is no corrosion build up on the pins of the connector but also on the inside of the connector where the wires attach. Also check for any frayed or pinched wires touching metal and fix as needed.
    view full answer...
  • Trailer Wiring Harness Recommendations for a 2012 Jeep Liberty without a Tow Package
    Part # 118384 is designed for Jeep Liberties with a factory tow package. Without the factory tow package, not all functions will work. In order to make it function, you will need to head to your dealer and have them re-flash either the Body Control Module BCM or Power Control Module PCM to fully activate that port. Either way you would not need a relay.
    view full answer...
  • Troubleshooting Trailer Lights that Shut off When Vehicle Brakes are Applied
    Typically when trailer lights all cut out when a certain function is applied like the vehicle brakes the problem is either a bad ground for the trailer light assemblies or you are overdrawing the trailer light circuit. Most likely its the ground. First place to start would be to inspect the trailer wiring connector on your 2007 Chevy Silverado. Look for corrosion on the pins. Clean as necessary. Most trailer lights ground through the mounting assemblies. Since your trailer is brand new...
    view full answer...
  • No Trailer Lights After Installing T-One 4-Way Connector on a 2016 Jeep Grand Cherokee
    Wiring harness # 118384 is just a pass-through device. It is designed to work if your 2016 Jeep Grand Cherokee came with the factory-activated towing package. If the Jeep does not have the factory towing package you will need to have a Jeep dealer activate it for you. Otherwise the harness will not work. If your Jeep does have the factory tow package and it is indeed activated and the factory harness had power before you plugged in # 118384 then it is possible that in the process of installing...
    view full answer...
  • Will the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Fit a 2022 Ram 1500 TRX
    Yes, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118384 will fit a 2022 Ram 1500 TRX.
    view full answer...
  • Right Side Trailer Lights Do Not Work on Trailer Towed by 2005 Nissan Titan
    Since the lights on the trailer are working fine on another truck that would mean the issue is on your 2005 Nissan Titan. It sounds like a bad ground. Ground problems normally show up when there is more draw on a system such as when you have the running lights on and then use another function like a turn signal or brake light. Or they can happen as the result of corrosion or loose wiring. Make sure that the vehicle side and trailer side connectors are clean and free of corrosion inside...
    view full answer...
  • Will the T-One Vehicle Wiring Harness with 4-Pole for a 2021 GMC Sierra 2500 Cause An Engine Light
    The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118384 which is a fit for a 2021 GMC Sierra 2500 in and of itself will not cause any dash lights to appear. It simply plugs in behind the trailer connector and pulls power (when an accessory is plugged in) from the factory fuse protected trailer wiring circuits.
    view full answer...
  • No Power on Tail or Brake Light Pin of Part # 118384
    If you are using the # 118384, and are not getting any signal on the connector for the brake or the tail light, you most likely have blown or missing tow package fuses. These fuses are typically located in a fuse box under the hood, but their location can vary according to the year, make and model of your truck. Your owners manual should have a fuse diagram showing which fuses protect which circuits, as well as the location of the fuses.
    view full answer...
  • Will the 4-Pole T-One Vehicle Wiring Harness Fit a 2020 Chevy Silverado 1500
    Yes, the T-One Vehicle Wiring Harness part # 118384 is a fit for a 2020 Chevrolet Silverado 1500 (All Models). It will be a direct plug-in option allowing you to retain the factory trailer connector in the bumper.
    view full answer...
  • Adding 4-Way to 2023 Honda Ridgeline with 7-Way
    The easiest solution would be to use the Tekonsha kit part # 118384 which would plug inline with the 7-way you have now and give you a 4-way that when not in use could be totally hidden.
    view full answer...
  • Installing Pilot Automotive LED Fire Strip # 36049 on 2002 Chevy Silverado
    What you are describing is almost certainly a ground problem. If you are hardwiring the Pilot Fire Strip into place, you will need to make sure that BOTH ground wires are attached to clean bare metal on the truck frame or chassis (see photo). Leaving the 4-pole connector on the Fire Strip and installing a 4-pole connector on your truck like part # 118384 would would be your best bet, as there would be no cutting or splicing required.
    view full answer...
    Image 1 for


< Previous
123. . .15



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee John S
Video Edited:
John S
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Matthew B
Test Fit:
Matthew B
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Ryan G
Installed by:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.