Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

See what our Experts say about this CURT Custom Fit Vehicle Wiring

• What Lighting Circuits Does Curt Trailer Wiring Harness for 2011 Ford Focus Activate
  The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 56014 for your 2011 Ford Focus will activate a trailer's turn signal lights, stop lights, and running lights.
  view full answer...
• Installation Instructions for the Curt Wiring Harness # 56014 on a 2011 Ford Ranger
  As soon as someone brings in a 2011 Ford Ranger and wants to have the # 56014 installed on it we will have a video of it on our site. In the mean time you can check out the installation instructions link that I attached that has color pictures that will walk you through the install process of this harness.
  view full answer...
• Troubleshooting Truck that Trailer Running Light Fuse Blows When Headlights are Turned On
  Sounds like you have a short on the trailer running light circuit of your 2004 Chevy Silverado. First check the trailer connector pins for corrosion or bend pins as that can easily cause a short. Next check the back of the connector looking for any cut or exposed wire there and fix as necessary. I attached a help article on troubleshooting 4-ways as well that will have more troubleshooting tips as well.
  view full answer...
• Trailer Running Lights Blow Fuse on Tow Vehicle When Connected
  What you are describing is a short circuit. The short could be anywhere from the vehicle side connector back to the trailer tail lights. First, disconnect the trailer from the tow vehicle. Next make sure that the vehicle side connector is clean and free of corrosion inside and out. I have also included a link to a help article explaining wiring troubleshooting. On the trailer side, check its connector and make sure it is clean and free of corrosion inside and out. Next you will need to...
  view full answer...
• Troubleshooting Trailer Wiring that Dims When Headlights Come On
  Normally if the lights dim on trailer wiring after activating the head lights or running lights of the vehicle that means you need a better ground for the trailer's wiring. Typically cleaning up where the ground wires attach to the truck frame will take care of this. Other option is run a jumper wire from the grounds of each light back to the main ground wire of the trailer harness as well. Sounds like you have trailer wiring installed on your 2011 Ford Ranger already but the Curt harness...
  view full answer...
• Would Short in Trailer Wiring Damage Vehicle Wiring in 2010 Ford Focus
  Since the Curt trailer wiring harness part # 56014 that fits your 2010 Ford Focus draws power from the vehicle taillights for the trailer wiring it would potentially pop a vehicle taillight fuse in the event of a trailer wiring short. We do have a kit that also fits your vehicle that has circuit protection with the Hopkins part # HM11140495 which wouldn't damage your vehicle wiring in the event of a trailer wiring short.
  view full answer...
• Troubleshooting Running Lights Circuit on Factory 4-Pole Wiring on 2011 Ford Ranger
  The best way to evaluate the operation of the factory 4-pole wiring harness on your 2011 Ford Ranger is to use a circuit tester like # PTW2992 but there are also checks you can do without a tester. It is possible that you may have just a corrosion problem on your 4-pole, and this is easy to check. Inspect the metal contact surfaces for any signs of even slight greenish or whitish discoloration. Pay particular attention to the pin for the brown (taillight) wire. Clean the contacts as necessary. Another...
  view full answer...
• How to Add a 4 and 7-Way Trailer Connector to a 2011 Ford Ranger
  The best option I have for you to add a 4-way trailer connector to your 2011 Ford Ranger is with the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 56014. The reason that this is the best option is because it does not require any cutting/splicing, it will just plug in behind each of your taillights. If the trailer you will be towing with your Ranger has brakes then you will also need both a 7-way trailer connector and a brake controller. For a 7-way,...
  view full answer...
• Who Can Install a Trailer Hitch on a 2005 Chevy Corvette Convertible
  A motorcycle purist would say Ride that hog to Sturgis! But you and I know that is not always an option. Plus there is something about a Vette towing a Harley that is awesomely American. Talk about turning some heads! I checked with Curt and they have a Gold level installer at the Sears at the Lima, Ohio shopping mall who could install hitch # C11034 on your 2005 Chevy Corvette. A trusted mechanic or RV dealer with a service center could also perform the installation. Please note that...
  view full answer...
• Will Curt Trailer Hitch Fit a 2006 Chevy Corvette with Corsa Cat Back Exhaust
  Trailer hitches including # C11380 are designed for and tested on stock vehicles so I cannot say for sure if it will fit with aftermarket exhaust installed on your 2006 Vette. But if the new exhaust has the exact same dimensions as the stock exhaust and installs in exactly the same way then the hitch would fit. If you plan on doing any towing with the hitch then you can use 1-7/8 inch ball mount # C45571 or 2 inch ball mount # C45572. And for wiring you would need # 56014 .
  view full answer...
• Towing Components for 2011 Chevy Corvette Grand Sport
  The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11380 does come with the mounting hardware needed for installation. This will not fit the dual mode exhaust but will fit all other models. The dual mode is the center not the outside. This will use the Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs # C45521 with hitch pin # F-2 and Hitch ball # A-82. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 56014 is what...
  view full answer...
• Trailer Hitch Receiver Fit for 2007 Ford Focus SES Hatchback
  I checked with Curt for you, and can verify the hitch that fits your 2007 Ford Focus SES Hatchback is indeed the Curt Trailer Hitch Receiver # C11294. If you plan on doing some light towing with the hitch there are a few more parts you'll need, starting with the Curt T-Connector Vehicle Wiring Harness # 56014. For towing, you'll also need Curt Drawbar # C45521, Pin and Clip # F-4, and either 1-7/8" Hitch Ball # A-80 or 2" Hitch Ball # A-82. I've added a link to the instructions for...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?