See What Fits Your Vehicle
customer service | view cart  View Cart

Boat Trailer Parts > Roller and Bunk Parts > Rollers > Keel Roller > 10 Inch Long > Redline

10" Rubber Keel V-Type Roller for Boat Trailers

Redline Boat Trailer Parts

Rating: ratingratingratingratingrating
9 reviews


Code:   811

Retail:$10.11

Price:$9.49

Shipping Weight: 4 pounds

Shipping Special
Quantity: 




Redline Boat Trailer Parts - 811

The deep "V" Keel Roller is designed to support the added weight of heavier boats by properly fitting the curve of the keel, allowing easier launching and loading of boats.
  • Length: 10"
  • Inside length at V: 1"
  • Hole diameter: 5/8"
  • Width: 3-1/2"




Video of 10" Rubber Keel V-Type Roller for Boat Trailers


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video Demo Redline Boat Trailer Parts 811
Redline Boat Trailer Parts 811 Review

Video Transcript for Redline Boat Trailer Parts 811 Review

Today, were going to review part number 811. This is the Redline 10-inch Rubber Keel V-Type Roller for boat trailers. The deep V keel roller is designed to support the added weight of heavier boats by properly fitting the curve with the keel, allowing easier launching and loading of the boats. This V keel roller, as you could see, it has the V shape. It has an overall length of 10 inches. It has a diameter of 3-1/2 inches and the center hole is a 5/8-inch diameter, which means this will fit on a 5/8-inch diameter shaft.

That should do it for review on part number 811.


Customers compare 811 to these similar products





Customers Who Purchased This Boat Trailer Parts Also Bought...






Customer Reviews

10 - 811

Average Customer Rating:  ratingratingratingratingrating4.2 out of 5 stars   (9 Customer Reviews)




- 811

ratingratingratingratingrating by: Jason04/09/2013

Is this review helpful?


The parts were exactly what I needed to repair my trailer. THANKS75064

comment on this review


- 811

ratingratingratingratingrating by: Paul S11/12/2012

Is this review helpful?


I ordered these rollers to replace some from a trailer that is over 50 years old. I was amazed at how easy it was to find what I was looking for, place my order and how fast it was shipped and arrived. The rollers appear to be good quality. They will be a custom install on this trailer. 59302

comment on this review


- 811

ratingratingratingratingrating by: chuck kraus05/17/2012

Is this review helpful?


Easy to install,quick delivery 40814

comment on this review


- 811

ratingratingratingratingrating by: Drew Williams01/23/2012

Is this review helpful?


Very good product, heavy duty rubber with nylon bushings. This item should have long life wear capabilites.30167

comment on this review


- 811

ratingratingratingratingrating by: Alan R.11/29/2011

Is this review helpful?


Product was delivered as promised and in a timely manner. I am very satisfied with the whole experience.27485

comment on this review


- 811

ratingratingratingratingrating by: Dennis S.10/21/2011

Is this review helpful?


Exceeds expectations. Installed in minu tes!25910

comment on this review


- 811

ratingratingratingratingrating by: Mike R08/26/2011

Is this review helpful?


Works ok. Plastic end caps are subject to breaking if bumped hard. Would be nice to find a replacement end cap.22886

comment on this review


- 811

ratingratingratingratingrating by: Jean F.03/11/2011

Is this review helpful?


Product arrived in a timely manner...and was the the best price I could find...but seam where rubber roller was molded together is very wide...hope it stays together upon usage!9060

comment on this review


- 811

ratingratingratingratingrating by: Rich B04/27/2012

Is this review helpful?


The product arrived quickly and without issue. The service and follow up was excellent. They have set a very high standard with their customer service.38549

comment on this review


Ask the Experts about this Redline Boat Trailer Parts


  • Can V-Keel Rollers be used on a Wood Sea Wall to Move a Pontoon Boat
  • This could work but make sure the wall can handle it. The roller, # 811, does not have an official capacity but just for the ease of moving the boat on them I would use as many rollers as could fit. The issue is that since the entire boat is not supported at the same time, it could end up damaging the boat. Another option is to construct a device like in the picture I have included using rollers, # DL21741, and some lumber. With this type of set up, it would be very easy to move the boat and
    view full answer...


Info for this part was:


Written by:
Ray

Edited by:
Fran

Test fit by:
Rick

Video by:
Zack

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com