CE Smith Keel Roller Assembly for 3" Wide Trailer Tongues - Galvanized Steel and Black Rubber

Video Transcript for CE Smith Boat Trailer Parts CE32003G Review

Today, were going to review part number CE32003G. This is the C.E. Smith keel roller assembly, for three inch wide trailer assemblies. This roller assembly will attach to your three inch wide trailer tongue, and it will support your boats keel for easy loading and safe transport on your trailer. It features a five inch rubber spool roller, galvanized steel brackets, and all the mounting hardware is included. These mounting brackets sandwich around the trailers tongue and attach with the included three-eighths inch diameter bolts.

There are multiple holes in the brackets, which make it easy to adapt to the different heights of trailer frames, and also insure that the roller will be mounted in the proper position. The five inch rubber spool roller helps to support your boats keel during trailering, and it also makes it easier to load and unload your boat, and it also helps to absorb road shock, while the boats being trailered. These sturdy, corrosion resisted brackets let you bolt your roller assembly onto the tongue of your boat trailer. Again it has the multiple mounting holes which will allow you to adjust the position and accommodate different trailer frame heights. Mounting hardware is included.

Has a black rubber spool roller which will deliver long lasting performance. Now these brackets, because they are galvanized, they are also hot dipped in a zinc plating, after theyre stamped. This will create a coating that is typically three millimeters to five millimeters thick. And because this thick coating will cover the steel parts it will allow the product to provide years of use without rusting or corroding. And again, this fits three inch wide trailer tongues.

Now the bracket does offset one inch this way, and one inch that way, so that way it allows a five inch rubber spool roller to be installed here. Now the overall height on this bracket is going to be eleven and a half inches. There are seven holes on the side, and the holes are seven-six Im sorry, the diameter of the bolt holes are three-eighths of an inch. This part is made in the U.S.A. And that should do it for review on part number CE32003G End of Audio Duration: 2 minutes, 44 seconds .