Best Toyota Sienna RV Vents And Fans

The order was processed quickly and I was kept informed on the status with e-mails. Vent cover installation and fit up was easy. The mate up of the existing open/close mechanism was a little "fussy". But a re-review of the included instructions confirmed the correct orientation. After I applied a small amount of grease to the friction retaining clip and slide, it was working as good as new.

Pleasantly pleased with this vent cover. Its fit over the roof opening of our 20 year old hay trailer was a bit tight so the plastic dome wouldn't descend flush to the trailer roof. It seemed the closing edge opposite the hinge was bowed inward a little. (Might have been compressed during shipping, but the outside of the box was not damaged). Anyway, I was able to gently bend it outward without damage using a channel lock on the supporting galvanized brace which runs from the hinge to the opposite side. The excellent instructional video attached to the dome part on etrailer's digital shopping catalogue was very helpful. I changed the screen too. I was able to find an older style screen on the Walmart website which did not require me to drill a new hole for the crank handle as demonstrated in the instructional video on the etrailer.com site. At half the price as etrailer's screen and double the shipping cost from Walmart, cost for replacing my vent dome was a horse apiece. Thanks etrailer. I'm very happy.

Was missing the retaining clips on both items. The old ones were ok.

What I'd like to know is how ETrailer got my Roof Vent stuff to me so quickly. Not only that, but I get a note right after I ordered referencing a prior order (for the same thing...different trailer) and I'm saying to myself, "These folks take customer service to another level." Everything ordered was in the box and delivered intact.

I just got the trailer roof vent, and it is a great product. I unboxed it and noticed it was made of quality material. The top half had nice wide corners with several predrilled holes for easy installation. The inside plastic parts were sturdy and well designed to fit just right. I will be replacing an old plastic roof vent on my 6x12 enclosed trailer. This roof vent will be a life saver because of its quality, and it will be able to handle the years of being in the elements to come. Plastic just doesn't last at all in elements. I would recommend this product to anyone who wants to save themselves a lot of time and money replacing the plastic model roof vents by purchasing one of these. Great Job folks!

No more breaking the roof vent on the trailer when shoveling off snow! Customer service was also excellent and shipped fast!

Hello all. I have a 1973 Apache Pop up, the original vent was missing so I looked online for a replacement and I came across this ventline vanaire roof vent, the vent fit perfectly in the original location of the old vent . This pop up has hard sides when you bring the roof down the side walls meet in the center but leave a gap between each other the handle for the vent fits perfectly in the gap. This memorial weekend we vacationed at Lake Isabella and it gets windy when the vent was closed it stayed closed no matter how strong the wind was. It was a success and worked perfectly. Thanks and I am a happy camper.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I bought this 6" fan a year ago and it is still going strong. I mounted it vertically on the rear wall of my van conversion boxvan(RV Off-Grid Campervan) about 7" from the ceiling. It was a good fit because I didn't want to cut a hole in my roof and my ceiling. It pulls all of the hot air out of the room within less than a minute. If you want to mount yours vertically as well it will operate just fine with no flaws. Water has never leaked through the unit at all even while mounted on the wall instead of the roof. I recently recommended this fan to someone who needed a fresh air fan for summer as well in a van. Perfectly satisfied with this fan, recommend it and would buy again if the need arises! Thank You

Click to Enlarge

I waited several months before writing a review so that I could make sure this replacement cover didn't leak. It hasn't! It was really easy to install which I did myself. For reference, I'm a 53 year old woman. Our trailer is an enclosed aluminum trailer, and this cover fit perfectly.

Click to Enlarge

Click to Enlarge

The cover came very quickly and securely in the mail, very durable, well constructed and stream-lined. Installed fairly easily with your on line installation Tudors. Unfortunately my base has a different type hinge, so a few minor challenges, but for the most part doable. I still need to find a friction clip to secure my top to the actuator mechanism, but hopefully I can find it locally. Our Arizona sun destroys most plastics as our original cover had failed in about five years. I am very pleased with my new cover top, looking to it meeting and exceeding our needs!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

MaxxAir fan arrived on time. Installation was easy, just follow the enclosed instructions. Hardest part was removing the old vent, that takes the most time. Total time start to finish was about 3 hours. Unit is good quality and workmanship. Very quiet running and easy to operate.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I installed this myself on a vintage camper. It fit perfect in the space where the old vent was. Wiring was simple, and cutting down the bezel was easy. I have left this open for months and even in storms and no rain gets in. Being able to keep it open keeps the camper from getting musty. I also like the tinted skylight effect it gives.

Click to Enlarge

After many months of fretting over cutting into the roof of my new van, and waiting for the rainy season to end, I found the installation very easy, and the operation is great. We're currently on a road trip, and the MaxxAir has made camping much more comfortable, and it even improves air circulation while driving with the vent open. it's very quiet at low speed and no leaks in even the heaviest rain.

Click to Enlarge

Decided to try the delux fan on my current lance camper. I installed a Maxxfan plus on the last camper, but wanted one with an integrated vent cover instead of needing an extra piece. The lower roof profile is a big plus for me with this fan. Very easy install just like other Maxxfan units. The fan is quiet and pulls a lot of air.

The 2250 Fantastic Fan still working great after a year! Pretty quiet and the thermostat is a handy feature that works well. In my application, it has a tendency to open itself while driving around unless it has been cranked down fairly hard. Driving with it open doesn't seem to be a problem other than the outside noise that comes in that way. My application was a fiberglass raised top on a Chevy van. I had to make a wood frame as the fiberglass did not provide a flat surface to mount to. Photos below show inside frame, fan, and insulation.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This is my second Fantastic Fan. I thought I'd try an amazon/China knockoff but sent it back as it had no thermostat and decided I want to by AMERICAN products for the most part when I can. I have had a FF in my Lance camper for ten years and it works great. Just put this new one in a Keystone trailer I just bought. I expect the same reliability from this quality name.

We attached the roof vent to our John Deere Gator and with it open the air flow increases significantly and keeps the inside cooler on hot days. Great product, easy to install, and we highly recommend.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I used one of the two I purchased in my 1971 W200 dodge truck its like free A/C, no not really but it helps flow air through my cab for those 9 months of stifling Florida heat an humidity. No leaks when closed. Great price. I paid 100 bucks more then a scraper paid for the truck (300) drive it almost everyday its a beater for sure but has good airflow...

Click to Enlarge

This roof vent is a real game changer for us. It allows us to open and vent our teardrop, even in the rain. Design is sleek. Lock works well. Fan is excellent and quiet.

Click to Enlarge

Quiet running, good ventilation. And Etrailer actually contacted me 1 year after purchase to see how I like the unit. My orthopedic surgeon (knee replacement) doesn’t even do that!

I’m writing this review before installing the vent so I can’t attest to its durability/longevity. This is a lightweight unit but it should suffice for use about three times a year for a couple of days at a time. This unit is affordable; well under $200. It is a next step up from a passive vent with no fan.

Five stars to E-Trailer for processing my order same day and getting it on UPS Ground where it took the three days to get delivered in time for my install on the weekend. I'm assuming this product deserves 5 stars as well since it is what it was advertised to be. My only minor ding is for the two missing screws that are needed to hold the screen in place. The $20 for the 'installation kit' shipped a tube of urethane caulking two sets of screws, one for the mounting topside (plenty, thank you) and the bottom ones for the trim. But did not see the short 1/2"? for the screen. I had to use my old ones, one of which fell down a floor vent so I need to hit up a hardware store for it. The vent went in with little effort. Just took my time scraping off the old caulking and used plumbers putty, instead of the caulking for under the flange (in case I have to rip this up again). The tube provided just enough for a thick coat of goo to cover the flange and where it meets the roof. I have a rubber roof, so this was perfect. I'll rate the other things I purchased once I install and use them.

This fan has worked great for my motor home. If you need a stronger breeze, this may not be the fan for you.

Quick delivery and easy installation. My camper is a little older but this vent fan is an exact match. Bery happy with the removable screen for cleaning great feature the old vent didn’t have.

So far it's holding up with no leaks. Kind of on the flimsy side comparing to the one removed but easy to install. Couldn't use the trim ring inside but after a year still looks new and the lifting/lowering mechanism works smoothly. Overall a good price for the quality.

Purchased this because from Etrailer because they state made in USA. Nowhere is there a made in USA stamp or in print. It looks identical to the made in China ones for $[XX] cheaper on [online resale]. By the build quality I am quite sure that it is Disappointed to say the least

These little solar vet caps Work just fine! None-the-less, For all my PVC/ plastic roof top covers they fall victim to squirrels! The refrigerator Vent cap alone has been replaced 3 times in about 9 years.

I have installed these vents on two 7'x14' trailers that are used to store kayaking gear (boats, paddles, helmets,PFD's,clothing and other soft goods). Hoping that the constant air-flow will help prevent mold & mildew. I can already feel the difference in temperature (cooler) than prior to installation. They work, but the construction is so lightweight, I'm wary of how long they'll last. For $[XX], it seems they could construct them a little beefier.

Click to Enlarge

Click to Enlarge

Happy to find a vent that considers the roof vent lid in the open position. We used them on both vents. One with the fan and one without since the allow the vent door to be fully opened. Can be a little labor intensive to install depending on your camper roof material. Happy with this product over more popular brands.

We have been looking for a white vent cover and were unable to locate except from strainer. Exactly what we need for our Dometic Fantastic Fan. Have not installed yet. Waiting for spring.

Fit perfect! Was just what I needed. There was even a video showing how to install. It even shows other related and parts that connect to the part incase those may be needed as well.

Replaced my old, cracked vent cover on 2010 Keystone Bullet. Exact fit. Fairly easy to install. Just ordered another to have on hand . Happy customer.

Provides for air flow while diverting rain. Pre-painted inside and out to prevent rust staining on exterior of trailer. Mounting accessories are included. Only one negative for me: the closing device restricts airflow by 50% when fully opened—so I won’t be using it. Overall an excellent product.

I have a commercial reach in cooler in my food truck. The compressor sits on the top. I took a temperature reading at just over 200 degrees on a 89 degree Florida day. After installing the Redline vent, the temperature has never gone above 105 degrees. That's a 100 degree difference! I did not use the butterfly damper as i wanted it to be always open. i added a vent cover with a sleeve, because of the 3" gap in the ceiling. Looking at the picture of the truck you can barely see the vent top from 25' away. I didn't need more drag going down the road. With the low profile of the vent I get rid of heat and no drag. Perfect.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Pretty easy install. It works great to let in fresh air without the rain and snow.

They are great I use on my snowmobile trailer.canleave the vent open all the time.

Easily and effortlessly installed. They are made of nylon or flexible plastic I believe. White, powder coated aluminum would have been better but after a few hours of searching these were the nicest looking and the best price.

Click to Enlarge

Click to Enlarge

Hi Carol, I bought a lot of things from etrailer, I'm looking for two rear doors for my trailer, do you sell doors for a 24x60 triailer, or where can I find them? thanks

Click to Enlarge

The numbers on the original vent are "AS-13 M-VDO449". The correct item number to order is BVD0449-A03 (for smoke color). There is a note on the etrailer site about this issue for a white cover, but they don't specifically tell you which item number to order for the smoke color. Printed instructions on the new vent were excellent in most respects. But there was nothing about how to remove the safety clip from the outside of the camper. More importantly, reinstalling the clip was the hardest aspect of this replacement. To remove the vent, you must first go inside and remove the black handle, screen, plastic cowling and plastic separator. You must then remove the two screws holding the cranking assembly in order to remove the white plastic slide from the vent. I was able to remove the clip by slipping a small flat head screwdriver under the top of the metal clip and prying it up carefully to avoid breaking or bending it too far. The new cover is then easily placed under the camper's hinge tabs and lifted into place. You may need to try to install the metal clip first so you can see how it fits together. In the photo the top of the clip is on the right while the left shows the extra tab which goes under the plastic vent. It took me a good 20 minutes to get the metal clip to seat properly over the two metal tabs on the vent frame.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

These vents work well and they are a perfect fit if you are replacing existing ventadome vents. The Smoke color is my favorite, lets plenty of light in, but does not produce any glare. They are a bit difficult to change if damaged. They are also susceptible to grape sized hail damage resulting in cracks and leaks. 4 Stars because changing them required removing the inner trim ring, screen, screen support frame and leaver arm assembly. I also wish they offered a thicker or hardened version for those of us who deal with hail all summer.