bing tracking image

Best Toyota Sequoia Cargo Carriers

change vehicle


Cargo Carriers Videos

UWS Aluminum Cargo Carrier Review - 2012 Toyota Sequoia

Today on our 2012 Toyota Sequoia we'll be test fitting the 23 by 51 Aluminum cargo carrier for two-inch hitches, part number UWS03511. Now to begin our test fit we'll simply slide the cargo carrier shank into the hitch, line up the hitch pinhole and install our hitch pin and that will secure our carrier to the vehicle. Now we'll go ahead and give you a few measurements. From the closest point of the cargo carrier to the bumper of the vehicle is 4-1/2 inches and this cargo carrier will add an additional 27-1/4 inches to the overall vehicle length. Now the exhaust exits the passenger rear on this vehicle and is approximately six inches from the cargo carrier platform. It also appears to be about two inches lower than the platform so there will be little to no heat transfer while you are driving down the road and that completes our test fit of the 23 by 51 Aluminum cargo carrier for two-inch hitches, part number UWS03511 on our 2012 Toyota Sequoia..



Curt Hitch Cargo Carrier Review - 2012 Toyota Sequoia

Today on our 2012 Toyota Sequoia well be test fitting the Curt 20x48 cargo carrier for both 1 and 2 inch hitches part #: C18145. Now to begin our test fit well simply slide the cargo carrier shank into the hitch using the included adapter for the 2 inch hitch. With it in place well go ahead and install our anti-rattle bolt tightening it down. With the bolt tight our cargo carrier is secured to the vehicle. Now well go ahead and give you a few measurements. The closest point of the cargo carrier is 4 inches from the bumper and the cargo carrier will add an additional 2 feet to the overall length of your vehicle.



Surco Folding Hitch Cargo Carrier Review - 2012 Toyota Sequoia

Today on our 2012 Toyota Sequoia, we'll be test fitting part number 52018F, the Surco 24x60 folding cargo carrier for two-inch hitches. To begin our test-fit, we'll simply slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install our hitch pin. And that will secure our cargo carrier to the vehicle. Now, we'll go ahead and give you a few measurements. Our ground clearance with this cargo carrier is 17 inches, and from the closest point of the cargo carrier in the stored position to the back of the vehicle is four inches. We can now pull the pin on the cargo carrier to bring the platform down.



Curt Folding Aluminum Cargo Carrier Review - 2012 Toyota Sequoia

Today on our 2012 Toyota Sequoia, we'll be test-fitting the Curt 20x60 Folding Aluminum Cargo Carrier, part number C18100. Now to begin our test-fit, we'll simply slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install our hitch pin. Now that our cargo carrier is secured to the vehicle, we'll go ahead and give you a few measurements. From the closest point of the cargo carrier to the back of the vehicle is two and a half inches, and our ground clearance of this cargo carrier is 18 inches. Now, we'll go ahead and pull the pin on the cargo carrier to fold the carrier down. And we'll give you a few more measurements.



Curt Hitch Cargo Carrier Review - 2002 Toyota Sequoia

Today, on our 2002 Toyota Sequoia, we're doing a test fit of the Curt 24x64 cargo carrier. That part number is C18152. Now, we already have our cargo carrier on our vehicle here. This is designed to work with 2" hitches, and has a weight capacity of 500 pounds. The first thing we're going to do, is take a few measurements, starting off with our ground clearance. We're going to have about 20 1/4" of clearance.



Curt Hitch Cargo Carrier Review - 2002 Toyota Sequoia

Today on our 2002 Toyota Sequoia, we're doing a test-fit of the Curt cargo carrier. This is a 20 by 48 cargo carrier, and that part number is C18110. This is designed to work with both an inch and 1/4, and two inch hitches, and has a weight capacity of 300 pounds. Although it has a pretty high weight capacity, it is lightweight so it is easy to insert and take out of your hitch. We're going to start off with a few measurements. First is going to be our ground clearance. We're going to have about 20 and 1/4 inches of clearance. Overall to our vehicle we're going to have about 27 inches.





Toyota Sequoia Cargo Carriers Questions