# 1
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
I used these to mount a vintage 1970 Avion C-11 to a 1993 D250. They worked great and were much stronger than I expected - and it was a huge cost savings (and a much more attractive look) than some of the frame mounted options of more than $1000. There were some oddities that I noticed. It was impossible to mount them exactly the way the instructions suggested because of where on the wings near the cab,. The brackets also could not stay on with the camper unloaded because they would hit the jack mounts, meaning they had to me bolted in after the camper was in the truck but before lowering the jacks, making the access to the bolts a frustrating 'feel for it' experience.I'f suggest the manufacturer secure the bolt so that you don't need to hold both sides when tightening/loosening, and also refine it to need less turns to do so. It took me 2 hours to mount the first time, and not much less when removing them with the limited access. The pads also came off in the first use. I gave it a 5 star because I realize there are limited options for older campers and anything universal is going to have issues with some thing - so that's just my input and experience. Overall pretty reasonable for the price and functionality.
The product was shipped extremely quickly, it arrived 3 days after I ordered them. As far as the product goes I was extremely pleased that they were as easy to install as the product video showed them to be. I had been looking for a tie down system that would work for my 2018 Ford since I purchased my camper in 2020 and after much research I found these at etrailer. One word of advice is that if your camper has a shower or other design that allows the camper to extend across the bed behind the wheel wells, either move the rear tie downs forward or shorten the leveling stud before you attempt to load your camper. On mine it turned out that once the tie downs were placed and attached I had to cut off about 3 inches of the threads. Other than that it was an easy install although the bolts that attach the tie downs to the under lip clamp are a challenge to install but take your time and they will go on. I will post an update once I have been on the road for a few trip and see how they are working. Thank you etrailer for your super fast shipping and online product videos.
# 2
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Another well engineered product well suited for the application and supported by knowledgeable staff at etrailer.
I just had a chance to put on quite a few miles in various conditions in these things perform flawlessly. I had some trouble with the installation as one of my frame bolts nut came loose so I had to drill another hole next to it and put a backer plant in the box but it turned out to work just fine doing that.
# 3
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
A little tougher to install than the front ones but not too bad. Torklift tie downs are very well made, tried he bumper attached one but I guess bumpers aren't what they used to be I saw bending at the tie down after one trip. So bought these. Entrailer as usual priced well and fast shipping.
Tommy C recommended the TorkLift Camper Tie-Downs. The Instructions are great and very easy to follow. They supply some cool wire helpers to hold bolts in the frame for you. All went very smoothly and a very secure. I love how solid the Camper feels on the truck.
# 4
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
Used these on my 2012 Tundra Crew max Had to put in more effort in the installation then the instruction tell or show. for example the truck pockets where these slide into I had too cut the plastic that was covering the holes, I removed the tail light on one side to get the top bolt screwed in. I had to remove the gas cap and plastic to secure the top bold. I also added bigger washers cause there are existing hole that hold the factory plastic so the nut couldn't slide out and away. Other then that these mount work great
Not compatible with 99 Ford F-150, even though the description said it was. Stake pockets are double walled on this truck. Bolts too short. Very frustrating.
# 5
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Torklift tie downs work great!
These tie downs were exactly what I needed and they arrived very fast! I will definitely buy from etrailer.com again.
# 6
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
I like to thank Lori with etrailer and guiding me through the process of getting , Front and rear, Torklift Camper Tie-downs -Custom Frame Mounts. Well doing research this was the best way to go for tying down and stabilizing a camper. Torklift camper tie-downs are solid well built! I had ordered Mounts on Monday and received them on Friday . I Had the tie-downs on my , 2019 Chevy Silverado 2500 by Saturday. The whole process was awesome , real easy installation. Great help with videos and instructions on mounting tie-downs on my truck provided by etrailer. I’m going to use them on my pop-up Hallmark Camper. Thank you for all your help etrailer.
I bought the TLC2220 for a low profile pop up cabover camper which I had for another Chevy 3/4 ton truck. The prior truck utilized a different attachment but was not available for my current 2012 Chevy truck. The TLC220 offers an excellent attachment point that is made out of thick well made steel and covered with a nice black powder coating. The instructions that came with the product should be thrown away. Pictures are poor, verbiage is incomplete and large gaps in the actual application. The saving grace is the video from etrailer. This is a great video. Complete, simple with no gaps and tells you exactly what the difficulties might be. This video even called out the socket sizes. Unfortunately the mate to this; the TLC 3212 rear mounts has a poor video with again gaps in application. And... again the TLC3212 written instructions is just fireplace starter material.
# 7
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
The rear tie downs do not extend out far enough to avoid the dully rear fender and has damaged the paint on the fender.
Installed front hitch in front and rear tie-downs. Solid as a rock and easy to install
# 8
Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4
Easy to put on they work perfectly very solid I have a 20-22 palomino SS 1251 truck camper Badland Edition doing a great job thank you a bunch
After installing the tie downs per the instructions I proceeded to connect a turnbuckle with chains and upon tightening it down the Brophy tie downs turned towards the camper connection point. In other words they would not tighten up.
# 9
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Excellent product, delivered quick and very well packaged. Installation was quick and simile, super well engineered and strong.
I just had a chance to put on quite a few miles in various conditions in these things perform flawlessly. I had some trouble with the installation as one of my frame bolts nut came loose so I had to drill another hole next to it and put a backer plant in the box but it turned out to work just fine doing that.
# 10
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
I ordered the TorkLift Rear frame mount tie downs for our Ford f 350 so we could secure our Lance truck camper to our truck, E-Trailer was great my tie downs arrived two days earlier then expected so I opened the box and checked everything over just to make sure everything was in great shape and everything was so I decided to put them on and it only took me five to ten minutes for both .These tie downs make it very easy to secure our Lance truck camper to our truck and also make it very safe to travel on the highways and back roads
Arrived quickly and installed easy. B
# 11
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Tommy C recommended the TorkLift Camper Tie-Downs. The Instructions are great and very easy to follow. They supply some cool wire helpers to hold bolts in the frame for you. All went very smoothly and a very secure. I love how solid the Camper feels on the truck.
2013 Chevrolet SilveradoThey are easy to install and work great with the torque lift camper tie-downs. They are so strong that I use them as a step to reach things in the bed of the truck when the camper is not in the truck.
# 12
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Torklift tie downs work great!
Bolted on perfectly
# 13
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Installed perfect on a Chevy Silverado 1500HD with 5.5 in frame in the rear.
I was very impressed with the way that my forklifts tie downs went on. They fit perfectly just like they were advertised. They also work the way they were advertised, I am very satisfied and happy with them all the way around.
# 14
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
I am extremely happy with this setup. Installation *could* be done by a single person, but would involve A LOT of figuring out special approaches to holding things in place for alignment and tightening. But I had a friend help me and installation went about as perfectly as one would hope for. I have used the oriduct for multiple trips, sone of which were on washboard gravel and dirt roads, and the setup has worked perfectly. My truck camper is a popup and pretty light, and the setup holds the camper in the truck very nicely. I suspect it would work very well even for heavier and larger truck campers, as well. I called support before ordering and was provided with perfect information in a very professional and caring manner. I am 100% satisfied, and highly recommend both this product and etrailer as a company.
I use this in A 2007 Silverado 1500 Classic with a 6.5-foot 1996 Lite Craft. Works great, and it was easy to install.
# 15
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Both the product and the service are top notch. I ordered the front and rear tie-downs for a 2006 Silverado. The easy to follow instructions made it easy to install the customized tie downs. We have been on the road several times since I installed the tie downs and all the miles I've traveled were with confidence that my camper was secure. Oh, the other great feature is that they are removable when not in use. Thank you etrailer!
I was very impressed with the way that my forklifts tie downs went on. They fit perfectly just like they were advertised. They also work the way they were advertised, I am very satisfied and happy with them all the way around.
# 16
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Fairly easy to enstall good fit and finish.
They work great, but if you have full length wheel to wheel round tube nerf step bars, they will not clear them. I had to change my step bars to the cab length type. They will likely clear a flat running board, not sure. This was the only fitment issue i had.
# 17
TorkLift Talon Camper Tie-Downs - Custom Frame Mount - Aluminum - Rear
It's a little tricky feeding the bolts through the frame (almost lost one, but a little tape on the bolt/spring helped), but a great product otherwise. The mounting scheme for my Chevy 2500 HD is strong and ingeniously designed. No drilling or welding. The aluminum won't rust like other tie-downs mounted to the frame. It was well worth the extra money to get the aluminum version of this product.
Another retailer canceled my order and would not return my calls. etrailer sent it out right away and I had it in time to install before my trip. The Talon Camper Tie-Downs fit and performed perfectly. Instructions were accurate and helpful.
# 18
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Great product, straight forward install. etrailer install video was very helpful. Photo shows camper and truck before install.
Good fit. Well made
# 19
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Instructions and pictures was not very clear and took a while to figure out how to install them. No video was available so that made things a little more difficult, But, once I figured out where they were suppose to go, the install was very easy.
# 20
TorkLift Talon Camper Tie-Downs - Custom Frame Mount - Aluminum - Front
Chevrolet Silverado 2500It's a little tricky feeding the bolts through the frame (almost lost one, but a little tape on the bolt/spring helped), but a great product otherwise. The mounting scheme for my Chevy 2500 HD is strong and ingeniously designed. No drilling or welding. The aluminum won't rust like other tie-downs mounted to the frame. It was well worth the extra money to get the aluminum version of this product.
Received 2 driver side front mounts and dealer where it was being installed went the extra mile and made the change happen by calling your company. Trip stalled out b/c of incorrect parts. Product is likely great but product was incorrect when received.
What our customers are saying:
"very easy to shop"