Best Chevrolet Silverado Trailer Hitch Ball Mounts

Curt Multi-Ball Adjustable Ball Mount Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting the Curt Multi-Ball adjustable ball mount for 2-inch hitches part number d900. Well begin by going ahead and getting our hitch height measurement. To get this measurement, you measure from the ground to the inside top edge of the receiver tube. We have a measurement of 19 1/4 inches. Now well go ahead and take our ball mount, slide the shank of our ball mount into our receive tube, line up the pin hole, and install our pin and clip. Well go ahead and mount it in the rise position first.

Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting the cushioned ball mount for 2-inch hitches a 1-inch rise or a 2-inch drop rated at 14,000 pounds, part number amsc2hd. To begin we need to go ahead and get our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. Our hitch height for this vehicle is 19 1/4 inches. Now well go ahead and slide the ball mount shank into the receiver tube of our hitch, line up the hitch pin hole, and secure it with the pin and clip. First we begin in our drop position.

Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting the Convert-a-Ball cushioned ball mount for two-inch hitches with a 6 inch rise or 8 inch drop rated at 10,000 pounds, part number amsc8. Now to begin well go ahead and get our hitch height measurement. To do this well measure from the ground to the inside top edge of the receiver tube opening. Our hitch height for this vehicle is 19 1/4 inches. Keep in mind that your measurement can vary due to hitch styles, tire sizes, or any other accessory that may affect your vehicles ride height. Now we can go ahead and slide the shank of our ball mount into our hitch, line up the pin hole, and install our hitch pin and clip.

Convert-A-Ball Pintle Mounting Bar Review - 2013 Chevrolet Silervado

Today on our 2013 Chevrolet Silverado, we'll be test fitting the Convert-A-Ball Cushioned Adjustable Pintle Mounting Bar for 2-inch hitches rated at 10,000 pounds. This is part number AMPC2. This eight-hole mounting bar lets you adjust the pintle height to level your trailer. Its cushioned shank protects your equipment and smoothes your ride. Now before we install our pintle mount, we need to go ahead and get our hitch height measurement. To do this, we'll measure from the ground to the inside top edge of our receiver tube.

Andersen Rapid Hitch Ball Mount Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting the Rapid Hitch Adjustable Aluminum Ball Mount Kit with two chrome balls, part number AM3410. Youll be able to tow up to 10,000 pounds with supreme safety and convenience of an adjustable five and a half inch drop, and six and a half inch rise. This kit includes a chrome plated steel ball combo for both two inch and two and five sixteenths inch balls. It will fit two inch by two inch receiver hitches. The aluminum alloy is strong yet lightweight and looks great, and will not rust. The ball mount adjusts in one inch increments up to five and a half inches drop and six and a half inches rise.

Draw-Tite Ball Mount Review - 2013 Chervolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting the Draw Tite Ball Mount, part number 2923. This will give you a three-quarter inch rise or a two inch drop and is rated at 6,000 pounds. To begin our test fit, well first do a measurement to give us out hitch height. To do this well measure from the ground to the top of the receiver tube opening. In this case, thats 18 inches. This measurement can vary due to tire size, style of hitch or any other accessory that may adjust the height of the vehicle.

Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting part number AMSC4. This is the Convert-A-Ball Cushion Ball Mount for two-inch hitches with a two and three-quarter inch rise for a four-inch drop, rated at 10,000 pounds. Before we begin our test fit, well first need to get our hitch height measurement. To do this, well measure from the top of the receiver tube to the ground. On this truck, that measurement is 18 inches. Now, keep in mind that measurement can vary due to hitch style, tire size or any other accessory that may change the vehicle ride height.

Roll-A-Hitch Cushioned Telescoping Swiveling Ball Mount Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado, well be test fitting Covert-A-Ball Roll-A-Hitch Cushioned Telescoping Swiveling ball mount in a 7-inch drop rated at 10,000lbs. This is part number CAB-LD6. Now if you have a lot of frustration over hard to reach hookups, this ball mount is the answer. Now it does have a 6-inch drop and has to be used in the drop position. Now before we begin our test fit, well need to know what our hitch height measurement is. To do this, well measure from the top of the receiver tube opening to the ground.

Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado, well be test fitting Covert-A-Ball Cushioned adjustable ball mount up to a 7-inch rise or down to a 9-inch drop rated at 5,000lbs. This is part number CAB-UM. Before we begin our test fit, well need to get a hitch height measurement. To do this, well measure from the top of the receiver tube opening to the ground. On this truck it measures 18 inches. Now keep in mind, that measurement can vary due to tire size, hitch style or any other accessory that may change vehicle right height.

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado, well be test fitting Covert-A-Ball Cushioned ball mount for 2-inch hitches with a inch rise or 2-inch drop rated at 10,000lbs. This is part number AMSC2. To begin our test fit, well need to get a hitch height measurement. To do this, well measure from the top of the receiver tube to the ground. Now on this truck that measures 18 inches. Keep in mind, this measurement can vary due to tire size, hitch style or any other accessories that may change vehicle right height.

Convert-A-Ball Cushioned Weight Distribution Shank Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado, well be test fitting Covert-A-Ball Cushioned weight distribution shank for 2-inch hitches part number AMAC1. This weight distribution shank helps to eliminate the push and pull feeling and clank often experienced when towing heavy trailers. The multiple attachment holes allow you to level your weight distribution head. This shank rated at 10,000lbs. This shank is also compatible with Convert-A-Ball accessories including the Pintle Hook combo with balls part number PH4, the ball mount adapter part number BA1 and the Clevis pin adapter part number CA1. The accessories attached with a 5/8-inch hitch pin.

Gen-Y Adjustable 2-Ball Mount with Stacked Receivers Installation - 2008 Chevrolet Silverado

Hi, everyone. It's Evangeline here at etrailer. And today we have the Gen-Y Adjustable Ball Mount with a 32,000-pound weight capacity. We're gonna take a look at how it fits our 2008 Chevrolet Silverado 3500. This is actually a very versatile ball mount with a lot of weight capacity, but both a very heavy ball mount. So some people call this the one stop shop hitch ball mount and that's because it has stacked receivers.

Andersen EZ Heavy Duty Adjustable Hitch Installation - 2008 Chevrolet Silverado

Today on our 2008 Chevrolet Silverado 2500 with 4 inch lift kit we're going to do a review and install of the Andersen Hitches EZ Heavy Duty Adjustable Hitch with Combo Ball part number AM3298. Here we have our nice heavy duty solid portion of the shank with the black powder coating. This is a 2 inch by 2 inch shank. It will fit your standard class 3 and 4 inch hitches that have a 2 inch by 2 inch opening or in this case where you have a 2 1/2 by 2 1/2 inch opening and inside is a sleeve. It will also work with these applications. We'll simply slide the shank into the sleeve then aligning the shank and sleeve up with the hitch pre drilled hole so that we can reinstall our pin and clip. Here we have our combination ball.

Draw-Tite Ball Mount Review - 2008 Chevrolet Silverado

Today on our 2008 Chevrolet Silverado, we'll be test fitting the Draw-Tite ball mount with a 3/4" rise or 2" drop, rated at 7500 lbs., part number 2923. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube, and our measurement is 18". Note that the ride height of your vehicle may vary due to tire size, hitch style, or some after-market accessories. We'll now begin our test fit by sliding the ball mount into the opening of the hitch in the drop position. We'll line up the holes and secure it with a pin and clip.

Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2006 Chevrolet Silverado

Today on our 2006 Chevrolet Silverado well be test fitting the Convert-A-Ball cushioned six way multi-hitch ball, part number CAB-6W for two inch hitches, rated at 10,000 pounds. To begin our test fit, well need to get our hitch height measurement. To do this well measure from the top of the receiver tube to the ground, which in this case measures 19 inches. Keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicles ride height, so its a good idea to measure yours. Were now ready to fit the ball mount to the vehicle. Well now slide the ball mount into the hitch, first using the two and five-sixteenths inch ball.

Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2006 Chevrolet Silverado

Today on our 2006 Chevrolet Silverado well be test fitting the Convert-A-Ball cushioned ball mount for two inch hitches with two and three-quarter inch rise or four inch drop, rated at 10,000 pounds. To begin our test fit well need to get our hitch height measurement. To do this well measure from the top of the receiver tube opening to the ground. On this truck that measurement is 19 inches. Keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicles ride height, so its a good idea to measure yours. Well now slide the ball mount shank into the hitch, line up the hitch pin hole and install our hitch pin.

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2006 Chevrolet Silverado

Today on our 2006 Chevrolet Silverado well be test fitting the Convert-A-Ball cushioned ball mount for two inch hitches with three-quarter inch rise or two inch drop, rated at 10,000 pounds. Before we test fit out ball mount well first need to get our hitch height measurement. To do this well measure from the top of the receiver tube opening to the ground. On this truck that measurement is 19 inches. Keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicles ride height, so its a good idea to measure yours. Now that we have our hitch height measurement well go ahead and slide the ball mount shank into the hitch, line up the hitch pin hole and install our hitch pin.

Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2006 Chevrolet Silverado

Today, on our 2006 Chevrolet Silverado, we'll be test-fitting the Convert-A-Ball cushion ball mount for 2-inch hitches for the 6 3/4-inch rise or 8-inch drop, rated at 10,000 pounds. Now, to begin, we'll need to get out hitch height measurement. To do this, we'll measure from the top of the receiver tube opening to the ground. On this truck that measurement is 19 inches. Now, keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicle's right height, so it's a good idea to measure yours. We'll now simply slide the shank of our ball mount into the hitch, line up the hitch pinhole and install our hitch pin.

Convert-A-Ball Pintle Mounting Bar Review - 2006 Chevrolet Silverado

Today, on our 2006 Chevrolet Silverado, we'll be test-fitting the Convert-A-Ball Cushion adjustable pintle mounting bar for two-inch hitches rated at 10,000 pounds. This is part number AMPC2. Now, this eight-hole mounting bar lets you adjust the pintle height to level your trailer. Its cushion shank protects your equipment and smooths your ride. Now, before we test-fit our pintle mount, we need to get our hitch height measurement. To do this, we'll measure from the top of the receiver tube opening to the ground.

Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2006 Chevrolet Silverado

Today, on our 2006 Chevrolet Silverado, we'll be test fitting the Convert-A-Ball dual cushion adjustable ball mount with 7-inch rise or 9-inch drop, rated at 5,000 pounds, part number CAB-UM. Now, to begin our test fit, we'll need to get our hitch height measurement first. To do this, we'll measure from the top of the receiver tube opening to the ground. On this truck, that measurement is 19 inches. Now, keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicle's right height, so its a good idea to measure yours. We'll now slide the shank of the ball mount into the hitch, line up the hitch pinhole, and install our pin and clip securing our ball mount to the vehicle in the drop position.

Draw-Tite Ball Mount Review - 2006 Chevrolet Silverado

Today on our 2006 Chevy Silverado 1500 we'll be test fitting the Draw-Tite ball mount with a 3/4 inch rise or 2 inch drop rated at 6000 lbs, part number 2923. A tried and true design makes this makes this ball mount one of our most popular sellers. You'll notice the ball mount has an angle cut which will allow for the ball mount to slide into your hitch with ease. Now, the ball mount provides 8-1/2 inches of clearance from the center of the hitch pinhole to the center of the 1 inch shank. This will fit a 2 inch by 2 inch receiver and uses a ball with a 1 inch shank. From the top of the receiver tube to the ground on this truck is 17-3/4 inches.

Andersen Rapid Hitch Ball Mount Review - 2006 Chevrolet Silverado

Today on our 2006 Chevrolet Silverado 1500 we'll be test-fitting the Rapid Hitch Adustable Aluminum Ball Mount Kit with two chrome balls, part number AM3410. Now you'll be able to tow up to 10,000 pounds with supreme safety and the convenience of an adjustable 5 1/2 inch drop and 6 1/2 inch rise. This kit includes a chrome-plated steel ball combo for both 2 inch and 2 5/16 inch. It will fit 2 inch hitches. The aluminum alloy is strong yet lightweight and looks great and will not rust. The ball mount adjust in 1 inch increments up to 5 1/2 inch drop and 6 1/2 inch rise.