Select Your Vehicle

View Cart

Best Cadillac SRX Cargo Carriers

change vehicle


Cargo Carriers Videos

Pro Series Hitch Cargo Carrier Review - 2013 Cadillac SRX

Today on our 2013 Cadillac SRX we will be test fitting the Pro Series Solo cargo carrier. That's part number PS1040100. Now its dimensions are 31 by 47 and it has a max capacity of 400 pounds, and it's for 2" only. We can go ahead and start by loading our shank into our receiver. We'll go ahead and line our pinholes up. Once we get those lined up we'll go ahead and take our included pin and clip.



MaxxTow Hitch Cargo Carrier Review - 2013 Cadillac SRX

Today on our 2013 Cadillac SRX we will be test fitting the MaxxTow cargo carrier. That's part number MT70108. Now its dimensions are 20 by 47 and it has a max capacity of 500 pounds, which is nice because it's lightweight and it's made out of aluminum, so it has its advantage over most of our other carriers. It's for 2" hitches only so we can go ahead and start by inserting our shank into our receiver. Go ahead and line our pinholes up. Once we get those lined up we'll go ahead and take our included pin and clip.



MaxxTow Hitch Cargo Carrier Review - 2013 Cadillac SRX

Today on our 2013 Cadillac SRX we will be test fitting the MaxxTow cargo carrier. That's part number MT70107. Not it has dimensions of 17 by 50 and has a max capacity of 500 pounds, and it's for 2" hitches only. We can go ahead and start by inserting our shank into our receiver. Now the dimensions make it easier to load. That is one of the nice things about this.



Detail K2 20x60 Hitch Cargo Carrier Review - 2013 Cadillac SRX

Today on our 2013 Cadillac SRX, we'll be test fitting the Detail K2 Folding Cargo Carrier, that's part number K2HCC602. Its dimensions are 20x60. It has a max capacity of 500 pounds and it's for 2 inch hitches only. We can go ahead and start by loading our shank into our receiver until our pin holes line up. Once we get those lined up, we'll go ahead and take our pin and clip. This carrier doesn't come with a pin and clip, you can find it on our website etrailer.com, part number PC3.



Curt 24x60 Hitch Cargo Carrier Review - 2013 Cadillac SRX

Today on our 2013 Cadillac SRX we will be test fitting the CURT folding cargo carrier. That's part number C18153. Its dimensions are 24 by 60 and it has a max capacity of 500 pounds, and it's for 2" hitches only. We can go ahead and start by loading our shank into our receiver until our pinholes line up. Once we get those lined up we'll go ahead and take our pin and clip. This carrier doesn't come with a pin and clip.



Curt 17x46 Hitch Cargo Carrier Review - 2013 Cadillac SRX

Today on our 2013 Cadillac SRX we will be test fitting the CURT cargo carrier. That's part number C18145. Now it's dimensions are 17 by 46 and it has a max capacity of 500 pounds. We can go ahead and start by inserting our shank into our our receiver. Real quick, you can use it for 1-1/4" or 2" hitches, so we have this little adapter here for our 2" hitch today. We can go ahead and insert our shank into our receiver.



Curt 19x60 Hitch Cargo Carrier Review - 2013 Cadillac SRX

Today on our 2013 Cadillac SRX we will be test fitting the aluminum Curt cargo carrier. That's part number C18100. This is for 2" hitches, it's dimensions are 19 by 16, it has a max capacity of 500 pounds. We can go ahead and start by inserting our shank into our receiver. All right, we'll line our pin holes up. Once we get that lined up we'll take our pin and clip. This cargo carrier doesn't come with a pin and clip, you can find it on our website at etrailer.com, part number PC3. As soon as we get our clip on there we can go ahead and take a few measurements.



Pro Series 24x60 Hitch Cargo Carrier Review - 2013 Cadillac SRX

Today on our 2013 Cadillac SRX, we'll be test fitting the Pro Series Cargo Carrier, that's part number 63153. Its dimensions are 24x60. It has a max capacity of 500 pounds and it's for 2 inch hitches only. We can go ahead and start by inserting our shank into our receiver and line up our pin holes. Once we get those lined up, we'll go ahead and take our pin and clip and this carrier doesn't come with a pin and clip, you can find it on our website etrailer.com, part number PC3. We can then go ahead and take a few measurements. Starting with our nearest point it's going to be about 4 1/2 inches from here to our bumper.



Surco Products 24x60 Hitch Cargo Carrier Review - 2013 Cadillac SRX

Today on our 2013 Cadillac SRX we will be test fitting the Surco cargo carrier. That's part number 52018. Now its dimensions are 24 by 60, it's for 2" hitches only, and it has a max capacity of 500 pounds. We can go ahead and begin by inserting our shank into our receiver. We'll go ahead and line our pinholes up. Once we get that lined up we'll go ahead and take our pin and clip.



Rola 22x59 Hitch Cargo Carrier Review - 2013 Cadillac SRX

Today on our 2014 Cadillac SRX, we will be test fitting the Rola Cargo Carrier. That's part number 59502. Now it's dimensions are 22 by 59, has a max capacity of 600 pounds and it's for 2 inch hitches only. We can go ahead and start by inserting our shank to our receiver. We'll go ahead and line our pin holes up. Once we get those lined up, we'll go ahead and insert our pin and clip.



MaxxTow Hitch Cargo Carrier Review - 2012 Cadillac SRX

Today on our 2012 Cadillac SRX, we'll be doing a test fit of the MaxxTow Cargo Carrier. That's part number MT70422. It's an aluminum cargo carrier so it's going to be nice and easy to put into our hitch receiver. It's meant for 2 hitch 00:00:15 receivers only. It's a sizeable carrier, its dimensions are 48 by 21. It has a 500 pound weight capacity and it's got an open floor plank design so it's going to be easy to clean.



Carpod Hitch Cargo Carrier Review - 2012 Cadillac SRX

Today on our 2012 Cadillac SRX, we'll be doing a test of the CarPod Walled Folding Cargo Carrier. That's part number M2205. It gives us 13 cubic feet of space, storage. It has a weight capacity of 450 pounds. Its dimensions are 23" by 47" and can be loaded and unloaded from any one of the sides. Let's go ahead and get a few measurements.



Stromberg Carlson Hitch Cargo Carrier Review - 2012 Cadillac SRX

Today on our 2012 Cadillac SRX, we'll be doing a test fit of the Stromberg Carlson Cargo Carrier. That's part number CC-100. Its dimensions are 23 by 60. It has a 500 pound weight capacity. As you can see, it's a sizable carrier. It has plenty of anchor points to tie down our cargo.



Curt Hitch Cargo Carrier Review - 2012 Cadillac SRX

Today on our 2012 Cadillac SRX, we'll be doing a test-fit of the Curt Folding Cargo Carrier, that's part number C18151. It's dimensions are 20 by 60, it has a 500-lb weight capacity, as you can see we've got a raise rail here, about 7" tall, plenty of room to tie down our cargo. It has a nice mesh floor so we don't have to worry about dirt and debris building up. Let's go ahead and grab a few measurements, see how it looks on our SRX. For our closest point, we've got about 13-1/2" before it makes contact. Overall, to the SRX, we've added about 35", and for our ground clearance, we've got about 16" underneath here. Let's open up our rear hatch and see where it breaks over the carrier. As you can see there, we've got no break over point which means we can stack our cargo as high as we want and open up our rear hatch all the way, not having to worry about it coming in contact with it.



Thule Sonic XXL Rooftop Cargo Box Review - 2011 Cadillac SRX

Today, on our 2011, Cadillac SRX, we'll be test fitting the Thule Sonic XXL Rooftop Cargo Box, part number th636s. We'll begin our test fit by placing the cargo box onto the vehicles load bars and as you can see, the box does come into contact with the antennae. You can remove the antennae by simply untwisting it. Once the box is in position, you can unlock the box and open the lid, exposing the two closest knobs. You can then turn the knobs to bring the clamps up around tightly against the load bars. You'll know when the clamps have been fully tightened when the knob starts to click.



Thule Sonic Medium Rooftop Cargo Box Review - 2011 Cadillac SRX

Today, on our 2011 Cadillac SRX, we'll be test fitting the Thule Sonic Medium Rooftop Cargo Box in glossy black, part number th634b. To begin our test fit, we'll place the cargo box onto the vehicles load bars. After positioning the clamps over the load bars, we can unlock the box and open the lid, exposing the two closest knobs. We'll then turn the knobs to bring the clamps up around tightly against the load bars and you'll know when they have been fully tightened when the knob starts to click. We'll then close the lid and move to the other side of the vehicle, where we can again unlock the box and open the lid, exposing the two closest knobs. We'll then turn the knobs to bring the clamps up around tightly against the load bars.



Thule Pulse Alpine Rooftop Cargo Box Review - 2011 Cadillac SRX

Today, on our 2011, Cadillac SRX, we'll be test fitting a Thule Pulse Alpine Rooftop Cargo Box, part number TH613. We'll begin our test fit by placing the cargo box onto the vehicles load bars. We'll unlock the box and open the lid, exposing the four slots on the bottom of the box. We'll slide the clamps down through the slots, over the top of the load bars. We'll then turn the knobs to bring the clamps up around tightly against the load bars, securing the box to our Cadillac. Once everything is all tightened down and secured, we'll move to the rear hatch and check for cargo access.



Thule Pulse Medium Rooftop Cargo Box Review - 2011 Cadillac SRX

Today, on our 2011, Cadillac SRX, we'll be test fitting the Thule Pulse Medium Rooftop Cargo Box, part number TH614. We'll begin our test fit by placing the box onto the vehicles load bars. We'll then unlock the box and open the lid, exposing the four slots on the bottom of the box. We'll take the clamps and slide them down through the slots, over the top of the load bars. We'll then turn the knobs to bring the clamps up around tightly against the load bars, securing the box to our Cadillac. Once everything is all tightened down and secured, you can see that we can easily access the rear hatch of the Cadillac with the Thule Pulse secured.





Cadillac SRX Cargo Carriers Questions

  • Thank you for providing the photo of your 2015 Cadillac SRX and your hitch-mount Thule Transporter Enclosed Cargo Carrier # TH665C. This large-capacity cargo carrier will indeed block most OEM cameras that are installed near the rear license plate. But we do offer aftermarket camera systems that will mount high enough on the vehicle's rear to still provide improved visibility. Swift Hitch offers their Wireless Camera System with Night Vision, part # 04928. I recommend this...
    view full answer...

  • Yes, a Yakima Rocketbox 11 part # Y07193 would fit the Thule Aeroblade Crossbars for your 2014 Cadillac SRX, part # TH7503-TH7503.
    view full answer...

  • If you were near St. Louis, MO you could come out and we would be happy to install the # TH682 for you. It's really not too hard to install. If you check out the install video link I attached you can see the entire install process. For the most part you would just need to set the box on the crossbars of your vehicle and then run the included u-bolts up around the crossbars and then through the box using the included wing nuts to tighten them. To make it easier to get up...
    view full answer...

  • If you have a Class III hitch like the Draw-Tite Max-Frame Trailer Hitch Receiver # 75682 on your 2013 Cadillac SRX I think your best option would be to get a Rola Swinging Enclosed Cargo Carrier # 59109, I can guarantee this carrier would give you enough clearance to open the lift gate of your vehicle. Check out the review video I attached for this product also. We have not had the chance to install a Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier # TH665C on...
    view full answer...

  • The recommended cargo bag for the Carpod Carrier part # M2205-2201 that you referenced is the Carpod Bag part # M2202. This bag is specifically designed to fit the inner dimensions of the # M2205-2201 so it would be the best choice. This bag is weather resistant so it would do an excellent job in the snow and ice you will be traveling in. For added security from the weather you can also put your cargo in a plastic bag before installing in the cargo bag. But realistically...
    view full answer...

  • I checked with Thule and they list their Sidekick part # TH682 as a fit for the factory crossbars of your 2013 Cadillac SRX so it would work well for you. I attached a review video for this cargo box for you to check out as well.
    view full answer...

  • We have many hitch mount cargo carriers that will work well with your 2011 Cadillac SRX. Before we can select the correct carrier for you, we will want to know the size of your trailer hitch receiver. There are Class II trailer hitches with a 1-1/4 inch receiver and Class III trailer hitches with a 2 inch receiver available for your SRX. I have attached a photo showing how to measure your trailer hitch receiver to determine the size. The next factor to consider is bumper clearance....
    view full answer...

  • If your 2010 Cadillac SRX has the factory installed crossbars that run side to side then the Rhino-Rack Master-Fit cargo box # RRRMFZ66 will fit the bars. The box is 70 inches long overall so unless you adjust the crossbars, if possible, forward and the mounting need in the box backward (which will make the box sit further forward on the roof rack) the box could interfere with the antenna. If you need to add crossbars you can use # SR1009 which will fit all models, including...
    view full answer...

  • If your 2007 Cadillac SRX has factory crossbars that run from side to side and measure no wider than 4 inches, then the SportRack SkyLine Cargo Box, # SR7095, will fit on your vehicle. It attaches to the factory crossbars with 4 U-bolts. If you do not have crossbars on your factory roof rack and just the raised rails that run from front to back, then you will need the Thule Roof Rack, # TH450, # THLB50. This kit will come with 4 feet that attach to the raised rails and 2 crossbars...
    view full answer...

  • In order to install any cargo box on the roof of your 2008 Cadillac SRX, you will first need to add cross bars that run side to side on the roof of the vehicle. We have two options for your SRX. First is the Thule Rapid Aero system. The Rapid Aero cross bars have an attractive aluminum finish and aerodynamic shape for less wind noise. For this system, you would need Thule Rapid Aero Crossroad Roof Mounted Railing Foot Pack, # TH450R, and Thule AeroBlade Aluminum Load Bars, # THARB47....
    view full answer...





Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com