Select Your Vehicle

View Cart

Best Buick Enclave Cargo Carriers

change vehicle


Cargo Carriers Videos

Stromberg Carlson Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave we're doing a test fit of the Stromberg-Carlson 23 by 60 cargo carrier. That part number is CC-100. This is designed to work with 2" hitches only and has a weight capacity of 500 pounds. Now although it does have a very high weight capacity, it is on the lighter end of our carriers so it's very easy to insert and remove from our hitch whenever we need to. We'll start off here. We're going to take a few measurements, ground clearance being first.



Curt Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave we're doing a test fit of the CURT folding 20 by 60 cargo carrier. That part number is C18151. Now we already have this installed. It has a 500 pound weight capacity and works with 2" hitches. The first thing we're going to do is take a few measurements. We're going to start off with our ground clearance here at the back.



Curt Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave we're doing a test fit of the CURT 20 by 48 cargo carrier. That part number is C18110. Now this has a 300 pound weight capacity and works with both 1-1/4" and 2" hitches. It is going to be one of those lighter weight cargo carriers. It's going to be really easy to get in and take out of your hitch. You won't really need any assistance for that. We'll start off with a few measurements.



MaxxTow Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave we're doing a test fit of the MaxxTow 48 by 21 cargo carrier. That part number is MT70422. Now this is designed to work with 2" hitches only and has a weight capacity of 500 pounds. Though it does have that very high weight capacity, it is a really lightweight. It's on one of our lighter ends. It's made out of aluminum so it's going to be really durable and really sturdy. The first thing we're going to do is take a few measurements.



Curt Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave we're doing a test fit of the CURT 20 by 60 cargo carrier. That part number is C18150. Now this has a weight capacity of 500 pounds and works with 2" hitches. The first thing we're going to do while it's on our vehicle is take a few measurements. We're starting off with our ground clearance here. Going to have about 18-3/4".



SportRack Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave we're going to be doing a test fit of the sport rack Vista cargo carrier. Now, this one is going to have your 2 inch shank that does fold and stow up against the back end of the vehicle. As well as a 20 by 60 inch base here with the expanding metal bottom. For easy clean ability. The sturdy stow construction is going to offer a 500 pound weight capacity. It will be part number SR5891.



SportRack Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave, we're going to be doing a test fit of the Sportrack Vista cargo carrier. This is going to be 20 inches wide by 60 inches long and have that nice, wide expanded metal base for easy cleanability as well as a sturdy steel construction that's going to offer a 500 pound weight capacity. It is also going to have a sturdy 2-inch shank that's going to attach to our 2-inch receiver using that 3/4 inch anti-rattle bolt to help reduce the sway, rattle and wobble that you normally have in your cargo carriers. Let's go ahead and start off by getting a few measurements. This is going to be part number SR9849. The closest distance is going to be about 7 1/4 inches. Overall distance is going to be about 28 3/4 inches.



Curt 24x60 Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave, we're going to be doing a test fit of the Curt Cargo Carrier. This is going to be part number C18153. It's going to be 24 inches wide by 60 inches long. Have that nice expanded metal base for easy cleanability as well as a sturdy steel construction that's going to offer a 500-pound weight capacity. Another nice feature about it is it's going to have that nice folding 2-inch shank and it's going to fit into our 2-inch receivers just fine. With the attachment to our receiver from our shank, it's going to attach using a hitch pin and clip and it's not going to be included so if you'd like to obtain one, you can get it on our website, part number PC3. Let's go ahead and start off by getting a few measurements with it in the stowed position here.



Detail K2 20x60 Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave we're going to be doing a test fit of the Detail K2 cargo carrier. This is going to be 20" wide by 60" long, have that nice expanded metal base for easy cleanability, as well as a sturdy steel construction that's going to offer a 500 pound weight capacity. Another nice feature about this is its nice folding 2" shank that will fold up and stow against the back of the vehicle when you don't have it in use. It will attach to your class three receivers using that 2" shank with no anti-rattle bolt. It's going to have a hitch pin and clip. If you'd like to obtain that hitch pin and clip, because it is not included, you can get it on our website, part number PC3.



Hollywood Racks Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave, we're going to be doing a test fit of the Hollywood Racks cargo carrier. Now this cargo carrier in particular, part number HR1485 is going to fit on the backs of your two cargo carrier, or two bike racks, excuse me, from Hollywood Racks. And one's gonna be the one that you see here today, which is gonna be the SE2 two with Hollywood Racks. SE2, and that's gonna be part number HR1450. It'll also fit in just the sport rider, which will be part number HR1400. With those two bike racks, on the back side here there's a reflector that can be removed. And once you remove that reflector, you'll then be able to place your cargo carrier on the back side.



Lets Go Aero Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave we're going to be doing a test fit of the Let's Go Aero GearCage. This is going to be 32 inches wide by 48 inches long. It's going to have that nice base here so you don't need to worry about losing any things or any items through it. It's going to offer a sturdy steel construction with a 300 pound weight capacity, and a 2 inch shank attaching to our 2 inch receiver, via a 78 inch anti-rattle ball that's going to help to secure it and keep it from wiggling around, rattling or bouncing around at the back of your vehicle. Let's start off by getting a few measurements. This is going to be part number HCR222. It's going to be about 600.25 inches at the closest distance, overall distance is going to be about 40.25 inches. Our ground clearance is going to be about 14.75 inches.



Rola 22x59 Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave, we'll be doing a test fit of the Rola 22 by 59 cargo carrier. It's going to have a 600-pound capacity and it's made of solid steel construction with a 2-inch shank for 2-inch hitches only. It's going to be part number 59502. Let's go ahead and fit this into our Enclave. With that inserted, let's go ahead and line up our pinholes and then take our hitch pin and clip and insert those into the holes. Just keep in mind that the hitch pin and clip are not included for this application.



Pro Series Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave we'll be doing a test fit of the Pro-series Solo Cargo Carrier. This is a 31" X 47" cargo rack with a sturdy steel construction and a 2" shank for 2" hitches only. It has a 400 pound capacity and your pin and clip are included. This will be part number PS1040100. Let's go ahead and insert this into our receiver. We'll go ahead and line up our pinholes and insert our pin. Next insert your clip. Now let's get some measurements.



MaxxTow Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave we're going to be doing the test fit of the MaxxTow 20 by 47 cargo carrier. This has a solid aluminum construction and a 500 pound capacity. It's got a 2" shank for 2" hitches only and it's going to be part number MT70108. Let's go ahead and fit this into our enclave. With these Enclaves the receiver is going to be quite a ways under there so let's go ahead and crawl underneath and line up our pinholes, insert our included pin and clip. Once you got your holes lined up, insert your included pin and your clip.



MaxxTow Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave we'll be doing a test fit of the MaxxTow 17 by 50 cargo carrier. It's going to have a 500 pound capacity, solid steel construction, and a 2" shank for 2" hitches only. It's going to be part number MT70107. Let's go ahead and fit this onto our Enclave. I'm going to go ahead and add while we're putting our shank into our receiver that our hitch pin and clip are included for this application. Let's go ahead and line up our pinholes.



Curt 17x46 Hitch Cargo Carrier Review - 2015 Buick Enclave

Today, on our 2015 Buick Enclave, we'll be doing a test fit of the Curt Cargo Carriers, 17x46 inch, 500 pound capacity, steel constructed, cargo carrier for 1-1/4 inch and 2 inch hitches. We have a 2 inch hitch here today, so let's go ahead and put on our carrier. It's going to be part number C18145. Insert that into your 2-inch receiver, just make sure your plastic adapter gets in there the right way, there you go. Then we'll go and line up our pin holes. Once you got your pin holes lined up go ahead and insert your anti-rattle bolt that's included and thread that in as far as you can by hand.



Pro Series 24x60 Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave we're going to be a test fit of the Pro Series 24 by 60 cargo carrier. This has a sturdy steel construction, 500 pound capacity, and a 2" shank for your 2" receivers only. The pin and clip is not included, and if you'd like to get one you can get it on etrailer.com, part number PC3. Let's go ahead and take our rack and insert it into our receiver. Go ahead and take your pin and clip and insert it into the hole. Go ahead and take your clip, put it on the end of your pin.



Surco Products 24x60 Hitch Cargo Carrier Review - 2015 Buick Enclave

Today on our 2015 Buick Enclave we're going to be doing a test fit of the Surco cargo carrier 24 by 60". It's going to be a sturdy steel construction with a 500 weight capacity, a 2" shank for 2" hitches only, and it's going to be part number 52018. Just as a reference for this part, it does not come with your hitch pin and clip, so if you'd like to obtain one you can get it on our website at etrailer.com, part number PC3. Let's go ahead and take our shank and insert it into our receiver. Once you have it inserted let's go ahead and line up our pinholes. Once your pinholes are lined up, go ahead and slide in your pin and your clip.



Curt Hitch Cargo Carrier Review - 2014 Buick Enclave

Today on this 2014 Buick Enclave, we're going to show you a Curt Cargo Carrier for two-inch hitches, part number C18151. This has a steel construction with a corrosion-resistant black tar coat finish. The hitch pin and clip is included. This is what the cargo carrier looks like when it's on the back of our Buick. We'll go ahead and get some quick measurements. From the bumper to the closest part of the cargo carrier is going to be just under 12 inches. Let's go ahead and take a look at the measurement it goes overall: From the bumper to the outside, we're looking at about 32 and a half inches of length added to the vehicle.



UWS Aluminum Cargo Carrier Review - 2012 Buick Enclave

Today on our 2012 Buick Enclave, we will be test fitting the 23 X 51 alluminium cargo carrier by UWS part no. UWS03511. To begin our test fit we will simply slide the cargo carrier shank into the hitch, lign up the hitch pin hole and insert the hitch pin. We can then put the safety pin on the other side of the hitch which will secure it to the vehile. We will go ahead and give you a few measurement at this point from the closes point of the cargo carrier to the back of the vehicle is more an inch. The inside openning measures 20 and 3/8 inches wide by 48 and 1/2 inches long, by 5 and 5/8 high.



Curt Hitch Cargo Carrier Review - 2012 Buick Enclave

Today on our 2012 Buick enclave, we'll be test fitting the curt 20 X 48 cargo carrier part no. C18145. A quick note about this cargo carrier, it will work in both inch and 1/4 and 2 inch hitches using the included space We will slide the cargo carrier shink into the hitch we'll lign up the hitch pin hole and insert our anti retal bolt. We can then tighten it down with a wrench. Once it's tight, our cargo carrier is secured to the vehicle and we can go ahead and load it up. We'll go ahead and give you a few measurements on our cargo carrier, the insert dimentions of our cargo carrier arre 46 and 3/8 inches long by 17 and 1/2 inches wide by 5 and 1/2 inches tall.



Stromberg Carlson Hitch Cargo Carrier Review - 2010 Buick Enclave

Today on our 2012 Buick Enclave we're doing a test fit of the Stromberg Carlson 23x60 Cargo Carrier. That part number is CC-100. This is designed to work with 2 inch hitches and has a weight capacity of 500 pounds. The first thing we're going to do is take a few measurements. We're going to start off with our ground clearance, so to the bottom of this bolt down here at the end of the carrier we have about 14 and 3/4 inches. Overall to the vehicle we're about 26 and 1/4 inches.



Lets Go Aero Hitch Cargo Carrier Review - 2010 Buick Enclave

Today on our 2010 Buick Enclave, we're doing a test fit of the Let's Go Aero GearCage, part number HCR222. Now, this is 48 x 32, and has a weight capacity of 300 pounds. The first thing we're going to do is take a few measurements here. The ground clearance is going to be first. Way up under here, up under the bottom of our carrier, we're going to have about 15-1/4 inches of clearance down to the bottom of this bolt. Overall to vehicle, we're adding about 40-1/2 inches, and our closest point is going to be about 6-1/2 inches away just there. Now, on our Enclave, we do have dual exhaust. There's one exhaust on the passenger and driver side.



Curt 24x60 Hitch Cargo Carrier Review - 2010 Buick Enclave

Today on our 2010 Buick Enclave we're doing a test fit of the Curt Folding 24x60 Cargo Carrier. That part number is C18153. Now this is designed to work with 2 inch hitches and has a 500 pound weight capacity. The first thing we're going to do is take a few measurements here. Our ground clearance is going to be first. At the very back of our carrier we have about 19 1/4 inches. That's because we do have that nice raised shank here, which is going to lift that carrier even higher than your hitch.



MaxxTow Hitch Cargo Carrier Review - 2010 Buick Enclave

Today on our 2010 Buick Enclave, we're doing a test fit of the Maxxtow 48 by 21 cargo carrier. That part number is MT70422. It's designed to work with two-inch hitches and a weight capacity of 500 pounds. Now, the first thing we're going to do is take a few measurements here. Our ground clearance is going to be first. From the ground to the very bottom of our carrier, we have about 16 inches.





Buick Enclave Cargo Carriers Questions

  • I checked with Thule and they list the Thule Force L part # TH628 as a confirmed fit for the factory crossbars of your 2016 Buick Enclave. Most likely this would allow you to open the rear hatch without issue, but you can take one simple measurement to know for sure. Slide the front crossbar all the way forward and measure from it's center to the hatch seam. If that distance is greater than 47-1/2 inches the hatch would open with this cargo box without any interference.
    view full answer...

  • The Thule Sonic XXL cargo box # TH636S will fit the factory roof rack on your 2014 Buick Enclave. To make sure there is no interference with an antenna or the rear hatch you will need to take one measurement. First, if you can move the crossbars on your Enclave, move the front bar as far forward as it will go. Then measure from the center of the bar straight back to the nearest potential obstruction or, if there are no obstructions, to the seam between the top of the hatch...
    view full answer...

  • As long as you have a hitch with a 2 inch opening like the Curt hitch part # 13424 yes, the Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier # TH665C that you referenced would work well on your 2014 Buick Enclave. The hitch and carrier recommendation I just mentioned would work well and would give you enough clearance. If you instead had a Draw Tite Hitch # 75528 you would only have about a 1/2 inch of clearance between the bumper and the upright mast of the carrier...
    view full answer...

  • According to Thule, the Force XXL Cargo Box, # TH626, will fit on your 2013 Buick Enclave with the factory roof rack, but due to the size of the cargo box, it will interfere with your ability to fully open your rear hatch. The largest Thule cargo box that will fit on your Enclave without interfering with your rear hatch are their XL cargo boxes like the Force XL, # TH625. In addition to the cargo box, I recommend picking up the Thule Step Up Wheel Step, # TH232. This will...
    view full answer...

  • As far as weight aluminum cargo carriers will be much lighter than steel ones of the same size. I recommend going with an aluminum carrier for this reason and because they are corrosion resistant. We have 2 aluminum cargo carriers and they are both rated for 500 pounds. Curt cargo carrier # C18100 is 19 inches front to back and 60 inches wide. It weighs about 30 pounds. It can also fold up. When in the folded up position it measures 5 inches from the center of the pin hole...
    view full answer...

  • The Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier # TH665C that you referenced should work very well on your 2012 Buick Enclave as long as you have a hitch installed on your vehicle. If you do not have a hitch I would recommend you go with a Draw-Tite Trailer Hitch # 75528. This is a Class III hitch with a 2 inch opening that would work very well for you. We found then when this hitch is installed there is a distance of 5 inches from the center of the hitch...
    view full answer...

  • Both the Rola Cargo Carrier # 59502 and the Pro Series Cargo Carrier part # 63153 that you referenced would be an excellent choice. The biggest advantage I see for the Pro Series is weight. This carrier weighs 59 lbs whereas the Rola weighs 73 lbs. If the additional weight, price and slightly smaller interior dimensions aren't a problem for you I would go with the Rola. If you don't mind the less appealing looks of the Pro Series I would go with it since from a function point...
    view full answer...

  • According to our friends at Thule, their Sonic XL Roof Mounted Cargo Box part # TH635B will indeed fit the factory crossbars of your 2011 Buick Enclave. I would also suggest a HitchMate tire step, part # HE4040 to provide easy access to any cargo stored on your roof. I have linked you to the installation instructions and a product demonstration video featuring the Sonic XL.
    view full answer...

  • Both the Thule Cargo Bag part # TH869 and # TH868 would fit your 2011 Buick Enclave once you install crossbars on it.
    view full answer...

  • The Thule Sonic Cargo Box # TH634B will fit your 2011 Buick Enclave. The cargo box can be installed to not interfere with your roof antenna. The carrier measures 73L x 34-1/2W x 16H inches. Per the installation instructions the minimum bar spread is 23-5/8 inches, so if your crossbars are adjustable simply move them forward a bit while staying with the appropriate crossbar spread. If your crossbars are not adjustable, the cargo box mounting connectors (inside the cargo...
    view full answer...

  • Yes, I checked with Yakima and the RocketBox Pro 14 cargo box # Y07192 will fit the factory roof rack on your 2011 Buick Enclave. TO determine if there will be any rear hatch interference you will need to take a measurement on the vehicle. Measure from the center of the front crossbar all the way back to the gap between the roof and the hatch. If that measurement is greater than 44-1/2 inches then there will not be rear hatch interference. I have linked a video review of the cargo...
    view full answer...

  • Yes, the Thule Sonic Large cargo box, # TH634B, is a fit for the factory crossbars on your 2011 Buick Enclave. I have included a link to a video review of this box being installed on a similar vehicle with a similar factory roof rack for you. I also recommend using a tire step, # TH232, which will make accessing the box easier. This box is also available in silver, # TH634S. Be sure to check the Enclave owner's manual and/or with Buick for the roof/roof rack weight capacity...
    view full answer...

  • The Curt trailer hitch mount cargo carrier, # C18100, will fit in a 2 inch receiver. It measures 4-1/2 inches from the center of the hitch pin hole to the closest edge of the carrier when folded up. To determine fit, first make sure you have a 2 inch receiver opening. Then measure from the center of the hitch pin hole straight back to the distance required to clear the rear of the vehicle. If the measurement is less then 5 inches, the carrier will fit when folded. On hitches...
    view full answer...

  • I have a couple options that would work for your 2010 Buick Enclave, but the Yakima SkyBox Pro 21 Rooftop Cargo Box # Y07198 is not a confirmed fit for your vehicle so I would not recommend it for you. I checked with Yakima and they do not list any fits for your vehicle. Thule has a couple options that you might be interested in. For a cargo box with a little less storage space but is priced more like the # Y07198 check out the Thule Sonic XL Rooftop Cargo Box # TH635B.
    view full answer...

  • From the research I did your Honda PCX 125 scooter weighs 280 lbs. The weight of the Rage PowerSport Steel Motorcycle Carrier # MX600 weighs 64 lbs. So if you add those two numbers together you get 344 lbs. We sell 3 different Class III hitches for your 2009 Buick Enclave. Two of the hitches have 750 lbs of tongue weight capacity while one has 500 lbs. Either way you should have plenty of capacity to transport your scooter with the # MX600. I would still recommend you confirm...
    view full answer...

  • The SportRack Skyline XL Cargo Box fits vehicles with crossbars up to 4 inches wide that are 21-1/2 inches apart on center. If your crossbars are 4 inches or less wide and can be adjusted so that they are 21-1/2 inches apart on center, the Skyline XL would work just fine for you. The SportRack Vista XL, part # SR7018 might be a better choice. The box offers some adjustability, fitting bar spreads from 23-5/8 to 34 inches apart, center to center. The Vista XL has the same 18...
    view full answer...

  • Yes! I checked with Thule and the Pulse Large cargo box, # TH615, will fit the factory crossbars on your 2009 Buick Enclave. Before loading anything on the roof check the roof rack for a capacity sticker (or the manual). The weight of the box, 36 pounds, will also have to be factored in when loading. To make accessing the roof easier I also recommend a tire step, # ALL647596, which is safer than standing in an open vehicle doorway. I have linked a video review of this step for you.
    view full answer...

  • According to Thule, there are some Sonic models that will fit the factory roof rack of your Buick Enclave without interfering with the full operation of the rear hatch. Their Sonic XL, part # TH635B for black or # TH635S for silver has a 17 cubic foot capacity would be a fit. The smaller Sonic L, part # TH634B in black or # TH634S in sliver is also a fit, with a 13 cubic foot capacity. Thule states that the longer, larger-capacity 22 cubic foot XXL Sonic models would extend...
    view full answer...

  • The Thule Sonic XXL Rooftop Cargo Box, # TH636S, will fit the factory roof rack on your 2008 Buick Enclave. However, you will not be able to open the rear hatch all of the way without interfering with the box. The largest box that you can use would be the Sonic XL box, # TH635S. The XL size Thule boxes will fit the factory roof rack AND will not interfere with the hatch. At only 5 cubic feet of space less than the XXL sizes this is a great option and you will save a few bucks.
    view full answer...

  • When folded, the Surco Folding Cargo Carrier has a distance of 5 inches from the hitch pin hole to the closest portion of the carrier. To determine if it will work with your hitch, you will need to measure the distance from the hitch pin hole in the receiver on your hitch to the furthest point of the rear bumper. If this distance is less than 5 inches, the carrier will fold. In fact, I would probably want to allow at least 3/4 of an inch for safety.
    view full answer...





Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com