bing tracking image

Best 2014 Chevrolet Equinox Bike Racks

change vehicle


Bike Rack Videos

Yakima Trunk Bike Racks Review - 2014 Chevrolet Equinox

Speaker 1: Today on our 2014 Chevrolet Equinox, we're going to be doing a test fit on the Yakima full back two-bike trunk mount rack, Part Number Y02634.Now, we already have a bike installed. Let's take a closer look and show off some of the features.Now, we're going to have on each end of the arm an integrated cable lock that can come and wrap around your second bike and latch onto that notch right there, and then you can use your set of keys that comes with the bike rack to insert it there and unlock it. On the other arm, you're going to have a bottle opener that Yakima likes to put on all of their products.Our bike has three different points where it's secured to our bike rack. We have two zip strips on the top of our bike frame. Then we have a zip strip right here securing it into the anti-rattle cradle. Once that's secured, this can prevent the bike from shaking too much while we're traveling.



Thule Hitching Post Pro Hitch Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox we're going to do a test fit on the Thule Hitching Post Pro. This is a folding and tilting 4-bike rack. They've designed it so we can use it with an 1-1/4" or a 2" hitch. Part number on it is TH934XTR. To begin our test fit we just slide the shank of the rack into the receiver tube of our hitch. We'll slide it in far enough to line up our threaded hole in our shank with our hitch pinhole. Those in line, we'll take our anti-rattle bolt, which is provided; we'll just thread that in.



Thule Helium Aero Hitch Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox we're going to do a test fit on the Thule Helium Aero. This is a folding and tilting 2-bike rack. They've designed it for use with 1-1/4" or 2" hitches. The part number is TH9042. Now this is also available in a 3-bike configuration. The part number: TH9043. To begin our test fit we're going to hold out on our black attached pin, slide the shank of the rack into the receiver tube of the hitch.



Softride Element Parallelogram Hitch Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox we're going to do a test fit on the Softride Parallelogram. This is a folding tilt-away style 4-bike rack. It's been designed for use with 1-1/4 or 2" hitches. Part Number on it is SR26248. To begin our test fit we need to slide the shank of the rack into the receiver tube of our hitch. Now I've got one threaded pin hole here and one threaded pin hole here.



Saris Bike Porter Hitch Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox we're going to do a test fit on the Saris Bike Porter. This is a folding and tilting 4-bike rack. They've designed it for use with 1-1/4" or 2" hitches. Part number on it is SA404B. Now to begin our test fit we're going to slide the shank of the rack into the receiver tube of our hitch. As we do this we want to line up our pinhole and our threaded pinhole. We can then take the anti-rattle bolt which is provided, slide it in from the driver side to the passenger side, and thread it on in.



Rhino Rack MountainTrail Roof Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox, we are going to do a test fit on the Rhino Rack Mountain Trail. This is a roof mounted fork clam style bike rack. The part number on it is RBC035. Now we've already got our Rhino Rack Vortec Roof Rack System installed. To begin our test fit, we'll pull the black cap off of the head of the carrier, stick it in our pocket for now. We'll then place our rack right up on the roof line.



Kuat TRIO Roof Bike Racks Review - 2014 chevrolet equinox

Today on our 2014 Chevrolet Equinox we're going to do a test fit on the Kuat Trio. This is a roof mounted fork clamp style bike rack. The black and chrome and that I have here today the part number TR02. We also have this in a nice looking gun metal gray and orange. That part number is RU01. We've already got the Rhino Rack Vortex Aero roof rack system installed, so were going to begin our test fit by just placing our rack right up here on the roof line of the vehicle. As you can see I've got my clamp moved here in the back and my rear wheel straps, so it makes it a little bit back heavy, but once you move that forward itll take care of that.



Thule Roof Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox, we're going to do a test fit on the Thule Paceline. This is a roof mounted fork clamp style bike rack. The part number on it is TH527. Now we've already got our Thule Rapid Crossroads Roof Rack System installed on the Equinox, so we'll just place our rack right up onto the roof line. We need to separate our lower clamp to get it around the underside of our load bar, so we're going to press up on the gray and black lever, then up on the small black lever. That allows that clamp to come down.



Swagman Upright Roof Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox we're going to be doing a test fit on the Swagman Upright. Now this is a frame clamp-style roof-mounted bike rack. The part number on it is S64720. We've already got our Rhino Rack Vortex Aero roof rack system installed so we're going to begin our test fit by just placing our rack right up onto our load bars. We want to center the front upper portion of the clamp over our load bar. We'll then bring one of our metal u-bolts up around the underside. We'll fit it up through the head of the carrier.



Thule Sprint Roof Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox, we're going to do a test fit on the Thule Sprint. This is a fork mount roof style bike rack. The part number on it is TH528. Now the sprint gives a completely tool-free installation, which is very nice. As you can see, we've got our 2 black rubber coated metal straps that are loose. We'll bring the front around the underside of the load bar, let the foot pack rest right on top, and here at the rear we'll slide our clamp forward and then bring it back so it is also sitting just on top of our load bar.



Thule Big Mouth Roof Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox, we're going to do a test fit on the Thule Big Mouth. This a roof mounted, frame clamped style bike rack, part number on it is TH599XTR. As you can see we've got our Thule Crossroads Roof Rack system that we've already installed on the Equinox. We'll begin our test fit by placing our rack right up onto our crossbars and we want to lift our clamp arms up. This is going to give us access to the wing nuts that are located on the top side here. We've got one on each side. We want to loosen these wing nuts up then we'll remove the lower portion of our clamp from them allowing them to hang down. This now give us the opportunity to bring our rack back.



Swagman XTC4 Hitch Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox, we're going to do a test fit on the Swagman XTC4. This is a 4-bike platform style rack, designed to tilt up against your vehicle when not in use. Part number on it is S64665. To begin our test fit, we're going to slide the shank of the rack into the receiver tube of our hitch. We need to slide it in far enough to line up our thread hole with our hitch pinhole. Now that we have those in line with each other we're going to take our anti-rattle bolt which is provided, we're going to thread that in. With it just hand tight, you can see there's still some play and some movement to our rack so now we'll take our wrench and tighten that bolt down. As we do this it draws the shank of the rack over against the receiver tube.



Yakima FullTilt Hitch Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox we're going to do a test fit of the Yakima Full Tilt. This is a folding and tilting 4-bike rack. They've designed it for use with inch and a quarter or 2 inch hitches. The part number on it is Y02462. If you need a little extra room, we do have this in a 5-bike as well. That part number is Y02463. To begin our test fit, we're going to slide the shank of the rack into the receiver tube of the hitch.



Softride Dura Parallelogram Hitch Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox, we're going to do a test fit on the Softride Dura parallelogram. This tilt-away style four bike rack has been designed for use of inch and a quarter or two-inch hitches. Part number on it is sr26247. To begin our test fit, we need to slide the shank of the rack into the receiver tube of our hitch. On the passenger side here, there are two threaded holes. I'm going to use the one thats closest to the front of the vehicle.Thats going to help to give us as much room as possible, or as much clearance back here.



Saris Thelma Hitch Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox, we're going to do a test fit on the Saris Thelma. This is a platform style tilting 3-bike rack. It's been designed for use with inch and a quarter or 2 inch hitches. The part number on it is Sa4239. Now, to begin our test fit, we'll slide the shank of the rack into the receiver tube of our hitch. We'll slide it in far enough so that our threaded hole is going to line up with our hitch pinhole. Then take our provided anti-rattle bolt.



Saris Freedom Hitch Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox we're going to do a test on the Saris Freedom. This is a folding and tilting 4-bike rack. It's been designed for use in 2" hitches. Part number on it is SA4414B. Now to begin our test fit we're going to slide the shank of the rack into the receiver tube of our hitch. As we do this we're going to want to line up our threaded hole with our hitch pinhole. We'll then take our provided anti-rattle bolt and we'll thread that in until we've got it hand tight.



Saris Axis Hitch Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox, we are going to do a test fit on the Saris Axis. This is a folding and tilting three bike rack. It's been designed for use with inch and a quarter or two inch hitches. Part number on it is SA843B. Now to begin our test fit, we need to slide the shank of the rack into the receiver tube of the hitch. We'll slide it in far enough to line up our threaded hole with our hitch pin hole. We'll then slide in our anti rattle bolt and begin to fed that in from the left hand side to the right.



Saris Axis Hitch Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox, we are going to do a test fit on the Saris Axis. This is a folding and tilting two bike rack. It's been designed for use with inch and a quarter or two inch hitches. Part number on it is SA832. Now we also have this in a three bike configuration, part number SA833B and in a four bike configuration as part number SA834B. Now to begin our test fit, we'll slide the shank of the rack right into the receiver tube of our hitch. As we do we want to line up our threaded hole with our hitch pin hole and take our anti rattle bolt, we'll thread that in then we'll use our wrench to tighten that down.



Saris Freedom SuperClamp Hitch Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox we're going to do a test fit on the Saris Freedom Superclamp. This is a platform-style 2-bike rack. It's been designed for use with 2" hitches and also 1-1/4" hitches. Part number on it is SA4025. To begin our test fit we'll slide the shank of the rack into the receiver tube of our hitch. As we do this we're going to want to line up our threaded pinhole with our hitch pinhole, then take our anti-rattle bolt. We're going to thread that in.



Swagman Titan Hitch Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox, we're going to do a test fit on the Swagman Titan. This is a folding and tilting 4-bike rack. They've designed it for use with an inch and a quarter or two inch hitches. Part number on it is S63410. To begin our test fit, we're going to slide the shank of the rack right into the receiver tube of our hitch. Now as we slide it in, we're going to line up our threaded hole with our hitch pin hole. With those in line, we'll now take our anti-rattle bolt, which is provided, slide that in and begin tightening it down.



Kuat NV Hitch Bike Racks Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox, we're going to do a test fit on the Kuat NV. This is a platform style folding and tilting 4 bike rack. As you can see, they've designed for use in 2" hitches and the black and chrome are part numbers N105-107. If you prefer, we have a gunmetal gray and orange finish, really nice looking rack. That part number is N101-103. To begin our test fit on the NV, we're going to place the shank of the rack into the receiver tube of our hitch.





2014 Chevrolet Equinox Bike Rack Questions