# 1
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Greaseless Balls - 5-1/2" Drop
Good service and the package arrived intact, they always kept me informed. Thank you, Andow
Excellent for tundra. solid construction. fast easy adjustment. drop and rise in one without effecting ground clearance much when in the drop setting. easy swap ball size is also great. fairly lightweight given size. multiple hitch pin holes helps.
# 2
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 5-1/2" Drop
Very nice hitch, and etrailer is a great company to purchase from.
great quality order here before and will in the future shipping super fast and always a great product
# 3
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 7" Drop, 7-1/2" Rise - 10K - Black
Unbelieveable great....
I purchased this Ball mount a year ago and I believe it's one of the best on the market! It's so convenient. The quality is very good, I recommend this to everyone who sees it on my truck.
# 4
etrailer Ball Mount Kit - 3" Rise or 4" Drop - 16,000 lbs
Fits my Tundra like a glove and don't have to worry it the trailer is going to break the tow hitch not with this one.
This is one of the items that has saved me a LOT of time. Since I use both my truck and my car (both have Curt hitches ordered from etrailer) for towing my half dozen or so different types of trailers, I am constantly needing to adjust the ball size and/or height depending on the combination of vehicle and trailer. With this kit is takes literally less that 30 seconds every time for me to configure to exactly my needs. Also, the bag is excellent for keeping crud and ball grease off my vehicle interiors and is big enough to hold a ball wrench inside as well. Cannot beat the price either for so much convenience and saved time.
# 5
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
Unbelieveable great....
USA built, super solid construction, easily adjustable. This is the best hitch on the market in my opinion and well worth the cost. For reference, I tow with a 2014 Tundra that is lifted. The back end is 1" higher than stock and with the 5" drop/5.5" rise I've got plenty of adjustability.
# 6
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
Unbelieveable great....
So far so good, easy install out of the box in "hidden mode", no assembly required.
# 7
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
Thank goodness for an extended length ball mount. I recently purchased a new 2 horse bumperpull trailer, and the tail gate was interfering with the jack post. Not acceptable! I looked for the highest quality extended length ball mount and found it with this product. Problem solved see pic. ARRIVED IN 2 DAYS! Thank you eTrailer.
great service,product received in great shape
# 8
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Great workmanship/quality and made in the USA.
# 9
Curt Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 9-3/8" Long - 10,000 lbs
Just what I needed 4 in rise. Well made.
This product is very heavy duty and the price was great. It fit perfectly and looks very good on the 2017 Toyota Tundra with a 6 inch lift. I would definitely recommend this product.
# 10
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
Fast shipment of exactly what I ordered. Product should work great.
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
# 11
Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 2" Drop - 15,000 lbs
Product arrived earlier than expected and it fit perfectly on my vehicle. I had conducted extensive research for an equivalent product and this was the best value for the price. I don't anticipate having any problems towing my trailer with this hitch. I put a locking pin on the hitch to discourage potential theft.
Great quality. Just as advertised. Expect it to work very well.
# 12
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Very sturdy ball mount. Very easy to install.
Fit and finish are great and is obviously a very well made ball mount.
# 13
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black
Unbelieveable great....
So far so good, easy install out of the box in "hidden mode", no assembly required.
# 14
Flash Secure 2-Ball Mount w/ Chrome Balls - 2" Hitch - 4" Drop, 5" Rise
Fantastic product, amazing how strong the hitch is when it's only made from aluminum. One key works both the lock pins as well as the ball height adjustment which was what I was looking (and paid) for. Best hitch as far as I am concerned. I do wish it would have came with a storage bag (for those of us who don't feel it necessary to drive around with a hitch on).
Overall pretty good. Adjusting the height and locking the pins isn't the smoothest, but it works just fine. If the ball is close to the key hole it makes it hard to lock the pins.
# 15
EZ Heavy Duty Adjustable Hitch with Combo Ball - 8" Drop/Rise - 14,000 lbs
Thank you all, Katie D., Jena D., Julie MH., as well as Everyone else at E-Trailer who helped me to identify, locate, order, recieve all the towing and hitch related items. Makes my life, towing, much more simple. I had for quite awhile been looking for a short rise and drop hitch sleeve with a 2” ball and 1 7/8” ball combination. Having contacted E-Trailer directly with my specific request, shortly thereafter, you came up with #AM3295 - EZ Hitch Adjustable Ball Mount, with a 4” Rise/Drop, with a 2” and 1 7/8” ball combo by Anderson. PERFECT! With the locking pins to match, same key, #AM3493, also by Anderson, I have on my 2013 Tundra at all times, everything I need or could use. Nothing to go missing, search for, take on and off. From 6 or more items down to just 2 locked in place. I am also most grateful for all the time and effort it took to get the extra set of keys. P.S., the red lines on lock pins, fingernail polish, as a visual LOCKED identifier. Thank you, Michael S.
So far so good. Received a surprise early delivery of a toy hauler this weekend. Today I took it down to a storage space so I had to assemble and use the hitch on top of a bare hill at the end of the street with a temperature of 15 and 20mph winds with falling snow. It went together easily and adjustment was simple too. Just have to fine tune it on a bit nicer day. Only the one short haul part way across town, but looking forward to many longer ones to come.
# 16
Ball Mount Adjustable with Sway-Control Tab, 6,000 lbs
I needed to raise the ball 2 1/2" above the receiver to level the trailer. This worked perfectly and made it easy to hook up the sway bar. Great service, great product! Thanks.
The ball mount did not fit onto the shank. This was a very disappointing experience.
# 17
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Have used this product before on another truck, worth the extra cost. Gets rid of the jerk/bump at stops and acceleration.
2007 Toyota Tundra 5.7L, 7X14 Parker flatbed tandem axle utility trailer 7700 lb capacity. I've only used it once since purchasing it, but compared to my previous non-cushioned ball mount it does an excellent job cushioning the load and keeps the trailer from banging the mount in the box and shaking the truck upon braking and acceleration. Very nice when hauling 2+ tons of cargo. Fast shipping from etrailer too.
# 18
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
As advertized; the shipment arrived in very good shape due to heavy-duty packaging. Quality and strength was as expected; this Curt adjustable ball mount is sufficient to tow anything my Tundra is rated for. The requested Prodigy P2 control will fit in place of the Tundra ash tray.
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
# 19
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 1" Rise - 2" Drop - 17,000 lbs
Just what I needed 4 in rise. Well made.
This product is very heavy duty and the price was great. It fit perfectly and looks very good on the 2017 Toyota Tundra with a 6 inch lift. I would definitely recommend this product.
# 20
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Just what I needed 4 in rise. Well made.
This product is very heavy duty and the price was great. It fit perfectly and looks very good on the 2017 Toyota Tundra with a 6 inch lift. I would definitely recommend this product.
MaxxTow Adjustable-Height Ball Mount Review - 2013 Toyota Tundra
Today on our 2013 Toyota Tundra well be test fitting the Max Tow adjustable height ball mount for two inch hitches with a ten inch drop or eight inch rise rated at 5,000lbs part #: MT70067. Before we begin our test fit we will first need to obtain a hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube and well get a measure of about 19 inches. This measurement may vary due to hitch style, tire size or any other after-market accessories that will alter the hitch height of the vehicle. To begin our test fit in the rise position well slide the shank of the ball mount into the opening of the hitch, line up our pinholes and secure it with the pin and clip. We can then adjust the height of the ball platform to the highest spot on the ball mount.
Andersen Rapid Hitch Ball Mount Review - 2013 Toyota Tundra
Today on our 2013 Toyota Tundra, we'll be test fitting the Andersen Rapid Hitch ball mount, part number AM3410. But before we can test fit our ball mount, first we want to measure the hitch height of our vehicle. To measure the hitch height, we'll measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 19-1/4". To test fit our ball mount, we'll insert it into the receiver tube of our hitch, line up the hitch pin holes, and secure it with the pin and clip. When we measure from the ground to the top of the ball platform, we get 19-1/2".
MaxxTow Tow Strap Loop Review - 2013 Toyota Tundra
Today on our 2013 Toyota Tundra, we'll be test fitting the MaxxTow tow strap loop for 2" hitches, rated at 10,000 lbs., part number MT70029. The MaxxTow tow strap loop is finished with a powder coat that resists rust. The hitch pin and clip are sold separately. The tow ring lets you attach recovery strap, cable, or rope, which is sold separately, to be used in agricultural, industrial, or recreational applications. To begin this test fit, we'll simply slide the shank of the tow strap loop into our hitch and secure it with a pin and clip. And that completes today's test fit of the MaxxTow tow strap loop for 2" hitches, rated at 10,000 lbs., part number MT70029, on our 2013 Toyota Tundra..
Draw-Tite Ball Mount Review - 2013 Toyota Tundra
Today on our 2013 Toyota Tundra, we're going to be test fitting the Draw-Tite ball mount, part number 2923. Before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, we'll measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 19-1/8". Now we'll test fit the ball mount. First we'll place it in the drop position.
Convert-A-Ball Pintle Mounting Bar Review - 2013 Toyota Tundra
Today on our 2013 Toyota Tundra we'll be test fitting the Convert-A-Ball Cushioned Adjustable Pintle Mounting Bar for 2 inch Hitches rated at 10,000 pounds, part number AMPC2. This 8 hole mounting bar lets you adjust the pintle height to level your trailer. It has a cushioned shank that protects your equipment and smooths the ride of your vehicle. To begin our test fit, in the drop position, we'll slide the shank of the mounting bar into the opening of the hitch, line up the pin holes, and secure with the pin and clip. We can not flip the mounting bar over to the rise position and, again, secure it with the pin and clip. That completes today's test fit of the Convert-A-Ball Cushioned Adjustable Pintle Mounting Bar for 2 inch Hitches rated at 10,000 pounds, part number AMPC2 on our 2013 Toyota Tundra..
Convert-A-Ball Cushioned Pintle Hook Combo Review - 2013 Toyota Tundra
Today, on our 2013 Toyota Tundra, we will be test fitting the converter ball cushioned pintle hook combo with three nickel-plated balls for two-inch hitches, rated at 16,000 pounds, part number PH2. Now, to begin our test fit, we will simply slide the shank into the opening of the hitch and secure it with the pin and clip. To access the pintle or to insert one of the three nickel-plated balls, we will undo the gold safety pin on the bottom of the shank and we will pull out on the silver, spring-loaded button to lift up on the U-shaped bar at the top of the pintle hook. Then, twist it to expose a silver cylinder for our pintle or we can remove that to insert one of our three nickel-plated balls. Now, since this pintle hook has no rise or drop, if your trailer ride height matches your hitch height, this should be an appropriate pintle hook for you. That completes todays test fit of the converter ball cushioned pintle hook combo with three nickel-plated balls for two-inch hitches, rated at 16,000 pounds, part number PH2 on our 2013 Toyota Tundra..
Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2013 Toyota Tundra
Today on our 2013, Toyota Tundra, we will be test fitting the converter ball dual- cushioned adjustable ball mount with a seven-inch rise or nine-inch drop, threaded at 5,000 pounds, part number CAB-UM. Now, before we begin our test fit, we will first need to obtain a hitch height of our vehicle, which is the measurement from the ground to the inside top of the receiver tube and we will get a measuring of 19 inches. Now, to begin our test fit and the draw position, we will slide the shank of the ball mount into the opening of the hitch and secure it with a pin and clip. Now, this ball mount is adjustable, so the ball mount platform at its lowest position, we will measure from the ground to the top of the ball platform and we will get a measurement of about nine inches. If the hitch height of your vehicle matches the hitch height of our vehicle and your trailer ride height matches this measurement, this would be an appropriate ball mount for you. We will now flip the ball mount over into the rise position and with the ball mount platform at its highest point, we will measure from the top of the ground to the ball platform and we will get a measurement of about 28 inches.
Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2013 Toyota Tundra
Today, on our 2013 Toyota Tundra, we are going to be test fitting the convertible cushioned six-way ball mount, part number CAB-6W, but before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, well measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 19-1/8 inches. We will go ahead and insert the ball mount with the receiver tube of our hitch lined with the hitch pin holes and insert our pin and clip. The six-way provides three different ball sizes; one is 7/8ths, 2 inch and 2-5/16 inch, as well as the ability to use a inaudible 00:00:33ring spade or inaudible 00:00:36 and connect it to this ball mount. There is no rise or drop involved with this ball mount, so the trailer height will measure the same as our hitch height, 19-1/8 inches.
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Toyota Tundra
Today, on our 2013 Toyota Tundra, we are going to be test fitting the convertible cushion ball mount part number AMSC-8, but before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, we will measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 19-1/8 inches. To measure our new ball mount, first well mount it in the draw position. We will insert the ball mount into the receiver tube of the hitch, install the pin and the clip. Now, we will go ahead and take our first measurement of the ball mount in the drop position.
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Toyota Tundra
Today, on our 2013 Toyota Tundra, well be test fitting the Covert-A-Ball Ball Mount, Part Number AMSC2HD. But before we can test fit our ball mount, first we want to measure the hitch height of our vehicle. The hitch height of our truck is 19-1/8 inches. Thats the measurement from the ground to the inside top edge of our receiver tube.To test fit our ball mount, were going to insert the end of the receiver tube of the hitcher, well line up the hitch pinholes and secure the draw bar with the pin.In the drop position, the ideal trailer coupler height would be 17-1/4 inches. Now, well go ahead and flip it over to our rise position. In the rise position, an ideal trailer coupler height would be 20 inches.Keep in mind that when you measure your trailer height, makes your trailer is leveled first.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Toyota Tundra
Today, on our 2013 Toyota Tundra, were going to be test fitting the Covert-A-Ball Cushioned Ball Mount, Part Number AMSC2. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, well measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 19-1/4 inches.To fit our ball mount, first were going to use it in the drop position. Well insert the ball mount into the receiver tube of our hitch, line up the hitch pinholes and secure it with a pin and a clip.Now, well go ahead and take a measurement to see what trailer coupler height it would work with. In the drop position, we have a measurement of 17-1/4 inches from the ground to the top of the ball platform.Make sure when measuring your trailer height, you do it when your trailer is leveled.
Convert-A-Ball Ball Mount with 10 Inch Drop Review - 2013 Toyota Tundra
Today, on our 2013 Toyota Tundra, were going to be test fitting the Covert-A-Ball Cushioned Ball Mount, Part Number AMSC10. But before we can begin our test fit, first we want to measure the hitch height of our truck. To measure the hitch height, well measure from the ground to the inside top edge of our receiver tube. For this vehicle, our hitch height is 19-1/4 inches.To test our ball mount, first were going to mount it in the drop position. Well insert the shank of the ball mount into the receiver tube of the hitch, well line up the hitch pinholes and secure the ball mount with a pin and a clip.Next, well measure from the ground to the top of the ball platform. Our measurement comes in at nine inches.
What our customers are saying:
"I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex"