# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
It's nice because you can use it either way. uplift or lower
It will do the job, for sure.
# 2
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
this is a great set of hitches. have used the 1 7/8 hitch for the most part but enjoy having the 2" just in case. I also like the varying distances that they can be raised or elevated for a variety of needs. I am very satisfied. Thank you James J.
Pretty happy with this kit. I like the fact that I can store and carry the ball and mounts in the bag and take them with me for use on another vehicle. I did replace the pin and cotter pin with a locking style pin because this did not appear to be very secure.
# 3
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
The product came quick and as expected. I had some questions prior to my purchase. I called their number and quickly reached some who was very helpful. Great, quick, friendly service. Tom
Great Product. Installation was straightforward and took about an hour. The longest part was cleaning the rust out of the weld nuts with WD-40 and the tube brush. Once they were cleaned installation was simple.
# 4
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 6-3/4" Long - 3,500 lbs
It's a receiver hitch! It's well built, the welds are clean and it fits the trailer hitch. Not much else to say!
Good quality and fit. Installation was straight forward and instructions were accurate.
# 5
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Finished nicely and fit perfectly, except had to take a file to the inside of the receiver as the punched holes deformed the tube slightly. Now...smooth!
good product, good quality. on time delivery
# 6
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
Hitch installation went well after viewing the installation video. The wiring harness video was not completely accurate but provided more than enough visual information to perform the wiring install in a reasonable time. Overall, very happy with product at this time due to easy install due to seller videos. Haven;'t used it yet other than to take a test drive, so, sorry no videos, Etrailer provides a good product with excellent product support. Shipping was very fast and of course the price was right. I would definitely use them again.
Can't wait to get them installed and see how they fit.
# 7
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
It's nice because you can use it either way. uplift or lower
The etrailer.com site was easy to navigate and I found the right draw bar for my new Rav4. The order was processed very quickly and delivery was within just a few days of the order. Prices are fair and customer service was great. Thanks for a great online experience!
# 8
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
The product came quick and as expected. I had some questions prior to my purchase. I called their number and quickly reached some who was very helpful. Great, quick, friendly service. Tom
Outstanding hitch, wiring harness & attachments. Online help (when given the trailer manufacturer and year) chose correct size and offset for ball to perfectly align trailer and car. You can see the lawn tractor sitting absolutely level on the trailer with the snow flying. It shows why I was in such a rush to acquire the hitch. From online chat with sales agent to her selection of right fit for the particular trailer and car to the ease of installation and the perfect ride behind my RAV4...RATING: A+! Couldn't be happier. Expedited 2 day shipping arrived exactly as promised. So impressed!!! Thank you etrailer for outstanding service. Very happy customer!
# 9
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
I have a 2004 RAV 4 and I was trying to get my ball away from the spare tire carrier. I think I probably would have been fine with the next size (shorter) ball mount and still got the job done. The good news is that with the 2 inch drop, I can open the rear door and it just rubs the seal at the bottom of the door a little bit, but I can still easily open the door. I did not want to drop the ball any lower, So this works out well for my rig.
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
# 10
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 11
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
It's a receiver hitch! It's well built, the welds are clean and it fits the trailer hitch. Not much else to say!
Good quality and fit. Installation was straight forward and instructions were accurate.
# 12
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
It's a receiver hitch! It's well built, the welds are clean and it fits the trailer hitch. Not much else to say!
Good quality and fit. Installation was straight forward and instructions were accurate.
# 13
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 14
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
The product came quick and as expected. I had some questions prior to my purchase. I called their number and quickly reached some who was very helpful. Great, quick, friendly service. Tom
Easy install, everything included, and great instructional video. Worked out great for my RAV4.
# 15
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
It's a receiver hitch! It's well built, the welds are clean and it fits the trailer hitch. Not much else to say!
Good quality and fit. Installation was straight forward and instructions were accurate.
# 16
etrailer Ball Mount Kit for 2" Hitches - 3/4" Rise or 2" Drop - 7,500 lbs
this is a great set of hitches. have used the 1 7/8 hitch for the most part but enjoy having the 2" just in case. I also like the varying distances that they can be raised or elevated for a variety of needs. I am very satisfied. Thank you James J.
# 17
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
The product came quick and as expected. I had some questions prior to my purchase. I called their number and quickly reached some who was very helpful. Great, quick, friendly service. Tom
Superb quality product that solved my RAV4 rear hatch to trailer winch post problem with it's extra long length!! Super fast shipping!! Can't get any better than etrailer!! Thanks!!
# 18
etrailer Ball Mount Kit - 3/4" Rise or 2" Drop - 7,500 lbs
Great deal for what you get.
this is a great set of hitches. have used the 1 7/8 hitch for the most part but enjoy having the 2" just in case. I also like the varying distances that they can be raised or elevated for a variety of needs. I am very satisfied. Thank you James J.
# 19
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
The product came quick and as expected. I had some questions prior to my purchase. I called their number and quickly reached some who was very helpful. Great, quick, friendly service. Tom
Easy install, everything included, and great instructional video. Worked out great for my RAV4.
# 20
Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs
It's a receiver hitch! It's well built, the welds are clean and it fits the trailer hitch. Not much else to say!
Good quality and fit. Installation was straight forward and instructions were accurate.
Draw-Tite Ball Mount Review - 2013 Toyota RAV4
Today on our 2013 Toyota Rav4, we will be test fitting the Draw Tite Ball Mount with a 3/4 inch rise or 2 inch drop with a capacity of 7500 lbs., Part #2923. We will begin out test fit by getting our hitch height, this is the measurement from ground to the inside top edge of our receiver tube. So our Rav4's hitch height is about 13 inches. We will now take our ball mount install it in the drop position being sure to line up our pin holes and securing it with a pin and clip. We will not take a measurement from the ground to the top of our ball platform and this will be around 11 inches. Make sure to measure your trailer height when your trailer is level. Measure from the ground to the bottom of the coupler. If your measurement matches ours, this would be a correct fit for you. We will now turn our ball mount to the rise position.
Curt Tri-Ball Mount Review - 2013 Toyota RAV4
Today on our 2013 Toyota Rav4 we will be test fitting the Curt Tri-Ball Mount Hollow 2" Shank, Part #C45001. To begin our test fit, we'll measure our hitch height from the ground to the inside of the top receiver tube of our hitch. Our measurement here is about 13 inches. We will slide the shank of the ball mount into the receiver tube of our hitch, line up our pin holes, slide through our pin and secure it with a clip. When installed, the height of our ball mount will be equal to our hitch height. Make sure to measure your trailer height when your trailer is level. Measure from the ground to the bottom of the coupler. If your measurement matches ours, this would be a correct fit for you. By removing our pin and clip, we can rotate to the left exposing our inch and 7/8 inch ball.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Toyota RAV4
Today on our 2013 Toyota RAV4, we will be test fitting the Convert-a-Ball cushion ball mount for two inch hitches with three-quarter inch rise, two inch drop and a 10,000 pound towing capacity, part number amsc2. We will begin our test fit by getting our hitch height. This measurement is from the ground to the inside top edge of our receiver tube. It's about 13 inches. We'll install the ball mount In the drop position, sliding the shank of the ball mount into the receiver tube of the hitch, line up our pin holes and secure it with a pin and clip. To get our measurement, we'll measure from the ground to the top of the ball platform. It's about 11 inches. Make sure to measure your trailer height when your trailer is level.
What our customers are saying:
"You folks are fast. Thank you very much."