Most Popular Roof Bike Racks for 2013 Toyota Corolla

Thule Big Mouth Roof Bike Rack Review - 2013 Toyota Corolla

Today, on our 2013 Toyota Corolla, we'll be test fitting the Thule Big Mouth Roof Mounted Bike Rack, part number TH599XTR. With the Thule Traverse Roof Rack System on our vehicle, we'll begin our test fit by first placing our bike rack onto our load bars. Now, starting at the front, we'll position the L brackets, which will go around the front and bottom side of the front bar. Then moving to the back, we'll loosen up one of the wing nuts and remove it and then position the black plate around the underside of the rear bar. We'll then re-install our black wing nut and then tighten it down. With the bike rack secured, we're ready to load up a bike. We'll need to undo the ratcheting straps on the front and back part of the carrier and then pull down on the black lever, which controls the frame clamp.

Swagman Upright Roof Mounted Bike Rack Review - 2013 Toyota Corolla

Today, on our 2013 Toyota Corolla, we'll be test fitting the Swagman Upright Roof Mounted Bike Rack, part number S64720. With a Thule Rapid Traverse Roof Rack System on our vehicle, we'll begin our test fit by placing the bike rack up onto the vehicle's load bars. Starting at the front, we'll take the silver U bolts to go around the underside of the front bar, up through the pre-drilled holes of the head of the carrier. We'll then thread in our black wing nuts and tighten them down. Now, moving to the rear, this time we'll take the silver U bolt to go down through the pre-drilled holes of the bike rack and then use the black plate to go on the bottom side of the rear bar. We'll then take our wing nuts and thread that onto the silver U bolts and tighten them down. With the bike rack secured, we're ready to load up a bike. We'll undo the red straps at the front and rear of the carrier, and then we'll loosen up the frame hook.

Swagman Fork Down Roof Bike Rack Review - 2013 Toyota Corolla

Today on our 2013 Toyota Corolla, we'll be testing the Swagman Fork Down roof mounted bike rack, part number s64710. With the truly rapid traverse roof rack system on our vehicle, we'll begin our test fit by first placing the bike rack up onto the vehicle's load bars. Starting at the front, we'll take the silver u-bolts to go around the underside of the front bar, up to the pre-drilled holes of the head of the bike rack. We'll then take the black wing nuts which we'll thread down onto the silver u-bolts, keeping them loose at this time. We'll then move to the rear and this time, slide the silver u-bolt through the predrilled holes of the bike rack and bring the black plate around the underside. We'll slide it over the u-bolt and then use our black wing nuts to tighten it down. With all of our hardware in place, we now can tighten them down all the way. With our bike rack secured, we're ready to load up a bike. We'll loosen up the skewer to make sure our forks can slide down onto it and well undo the trace trap.

Kuat TRIO Roof Bike Rack Review - 2013 Toyota Corolla

Today on our 2013 Toyota Corolla, we'll be test fitting the Kuat Trio Roof Mounted Bike Rack. Part number RU01. With the Thule Rapid Reverse Roof Rack System on our vehicle, we'll begin our test fit by placing the bike rack up onto the vehicle's load bars. We'll go ahead and start at the back and position the rubber coated black plate around the under side of the rear bar. We'll remove the black wing knot and slide the bolt through the hole of the bracket reinstalling our wing knot loosely. We'll then move to the front and take the rubber coated U bolts to go up around the bottom side of the front bar, up through the frigged holes of the head of the bike rack. We'll then take the black knots to thread down on onto the U bolts and use the silver wrench to tighten it down. With the front part of the bike rack secured, we'll then go ahead and go to the rear and finish tightening down the black wing knots. With the bike rack secured, we're ready to load up our bike.

RockyMounts TieRod Roof Bike Rack Review - 2013 Toyota Corolla

Today on our 2013 Toyota Corolla, we'll be test fitting the Rockymounts Tierod roof-mounted bike carrier, part number RKY1014. Now with the roof rack system already assembled on our vehicle, we'll begin our test fit by placing the carrier onto the vehicle's cross bars. We'll then remove the front black plastic cap and loosen up the allen bolts at the rear of the carrier. In no specific order, we'll bring the rubber coated steel around the underside of the front cross bar, and the back black bracket around the underside of the rear cross bar. We'll then tighten down the front allen bolt to secure the front of the carrier to the front cross bar, and tighten down the rear allen bolts to secure the rear bracket to the rear cross bar. We'll then replace our front black plastic cap, and we're ready to load our bike.

RockyMounts TieRod Stretch Roof Bike Rack Review - 2013 Toyota Corolla

Today on our 2013 Toyota Corolla, we'll be test fitting the Rockymounts Tierod Stretch roof-mounted bike carrier, part number RKY1011. Now with the roof rack system already assembled on our vehicle, we'll begin our test fit by placing the carrier onto the vehicle's cross bars. We'll then remove the front black plastic cap and in no specific order bring the rubber coated steel straps around the front cross bar, and the rear black bracket around the rear cross bar by loosening up the allen bolts. We'll then tighten up the allen bolt on the rear bracket to secure the rear of the carrier to the rear cross bar. We'll then tighten down the allen bolt in the front of the carrier to tighten down the straps around the front cross bar, securing the carrier to the vehicle. We'll then replace the front black plastic cap, and we're ready to load our bike.