bing tracking image

Best 2011 GMC Acadia Cargo Carriers

change vehicle


Cargo Carriers Videos

SportRack Hitch Cargo Carrier Review - 2011 GMC Acadia

Today on our 2011 GMC Acadia, we are going to be doing a test fit of the SportRack Vista Cargo Carrier. This cargo carrier is going to measure twenty inches wide by sixty inches long, have a two inch shank for your two inch hitches only, and its going to attach to our receiver using a three quarter inch anti-rattle bolt. Also it will have this nice expanded metal base for easy clean-ability and sturdy steel construction offering a five hundred pound weight capacity with this nice folding shank that will fold up and tuck away when you don't have it in use. Let's go ahead and get some measurements to start off. Our closest distance will be our first measurement and that's gonna be from that bracket there on the front side of the rack to the back side of the bumper. At about eight and seven eighths inches. Overall, this distance that we've added to the vehicle from the rear of the bumper to the back of the rack at about thirty seven and three quarter inches with a rear ground clearance of about twenty one and a half inches.



SportRack Hitch Cargo Carrier Review - 2011 GMC Acadia

Today on our 2011 GMC Acadia we're going to be doing a test fit of the SportRack Vista cargo carrier. This cargo carrier is going to be 20" wide by 60" long and offering a fixed 2" shank to attach to our 2" receiver. It also attaches to that receiver using a 3/4" anti-rattle bolt. It's going to have an expanded metal base for easy cleanability as well as a sturdy steel construction that's going to offer a 500 pound weight capacity. Let's go ahead and start off by getting a few measurements. Our closest distance will be our first measurement from the backside of the bumper to the front side of the rack at about 6-5/8". Overall distance that we've added to the back of the vehicle from the back of the bumper to the back of the rack at about 28".



Lets Go Aero Hitch Cargo Carrier Review - 2011 GMC Acadia

Today on our 2011 GMC Acadia we're going to be doing a test fit of the Let's Go Aero Gear Cage. This Gear Cage is going to measure 32" wide by 48" long and it's going to have a sturdy 2" shank to automatically to our 2" receiver, as well as with its sturdy steel construction it's going to offer a 300 pound weight capacity. Now it will attach as well with a 7/8" anti-rattle bolt that will secure our load and make sure that there's little sway, rattle, and wobble. We'll show you that in a moment. Let's go ahead and start off by getting a few measurements. Our closest distance will be our first measurement from the backside of the bumper to the front side of the rack at about 5-1/2". Overall distance that we've added to the vehicle from the rear of the bumper to the back of the rack is going to be about 39-5/8", and our ground clearance from the bottom side of the shank is going to be about 15-3/4".



Rola Dart Hitch Cargo Carrier Review - 2011 GMC Acadia

Today on our 2011 GMC Arcadia, we will be test fitting the Rola Dart folding cargo carrier. That's part number 59550. Its dimensions are 23 by 56. Has a max capacity of 450 pounds. It's meant for 2- inches only. We can go ahead and begin by inserting our shank to our receiver.



MaxxTow Hitch Cargo Carrier Review - 2011 GMC Acadia

Today on our 2011 GMC Acadia we will be test fitting the MaxxTow cargo carrier. That's part number 70107. It has dimensions of 17 by 50, it has a max capacity of 500 pounds, and it's for 2" hitches only. We can go ahead and begin by inserting our shank into our receiver and lining our pinholes up. That looks pretty close. Then we'll take our included pin and clip, go ahead and run that through.



Detail K2 20x60 Hitch Cargo Carrier Review - 2011 GMC Acadia

Today on our 2011 GMC Acadia we will be test fitting the Detail K2 folding cargo carrier. That's part number K2HCC602. Its dimensions are 20 by 60, it has a max capacity of 500 pounds, and it's for 2" hitches only. We can go ahead and begin by inserting our shank into our receiver. We'll line up our pinholes. Once we get those lined up we'll take our pin and clip.



Curt 24x60 Hitch Cargo Carrier Review - 2011 GMC Acadia

Today on our 2011 GMC Acadia we will be test fitting the Curt Folding Cargo Carrier, that's part number C18153. It's dimensions are 24" by 60" and has a max capacity of 500 pounds and is for 2" hitches only. We can go ahead and begin by inserting our shank into our receiver. We'll go ahead and line our pin holes up, that looks like it's going to look pretty good. Then we'll take our pin and clip - this carrier doesn't come with a pin and clip but you can find it on our website at etrailer.com, part number PC3. Then we can take a couple measurements. Starting with our nearest point it looks like it's going to be from here to our bumper right about 4-1/2". Overall we've added about 14" to our vehicle.



Curt 19x60 Hitch Cargo Carrier Review - 2011 GMC Acadia

Today on our 2011 GMC Acadia we will be test fitting the CURT folding aluminum cargo carrier. That's part number C18100. Its dimensions are 19 by 60, it has a max capacity of 500 pounds, and it's for 2" hitches only. We can go ahead and begin by inserting our shank into our receiver. We'll line our pinholes up. That looks pretty good.



Curt 17x46 Hitch Cargo Carrier Review - 2011 GMC Acadia

Today on our 2011 GMC Acadia we will be test fitting the CURT cargo carrier. That's part number C18145. Its dimensions are 17 by 46, it has a max capacity of 500 pounds, and it can be used for either 1-1/4" or 2" hitches. We've got this little adapter here. We've got a 2" hitch here today so we can go ahead and begin by inserting our shank into our receiver. Now we'll line our pinholes up.



Pro Series Hitch Cargo Carrier Review - 2011 GMC Acadia

Today on our 2011 GMC Acadia we will be test fitting the Pro Series Solo cargo carrier. That's part number PS1040100. Its dimensions are 31 by 47, it has a max capacity of 400 pounds, and it's for 2" hitches only. We can go ahead and begin by inserting our shank into our receiver. We'll go ahead and line our pinholes up. That looks pretty good.



MaxxTow Hitch Cargo Carrier Review - 2011 GMC Acadia

Today on our 2011 GMC Acadia we will be test fitting the aluminum MaxxTow cargo carrier. That's part number MT70108. Its dimensions are 20 by 47 and it has a max capacity of 500 pounds, and it's for 2" hitches only. We can go ahead and begin by inserting our shank into our receiver until our pinholes line up. That looks pretty good. Then we'll take our included pin and clip and run that through.





2011 GMC Acadia Cargo Carriers Questions