# 1
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
This is one of the items that has saved me a LOT of time. Since I use both my truck and my car (both have Curt hitches ordered from etrailer) for towing my half dozen or so different types of trailers, I am constantly needing to adjust the ball size and/or height depending on the combination of vehicle and trailer. With this kit is takes literally less that 30 seconds every time for me to configure to exactly my needs. Also, the bag is excellent for keeping crud and ball grease off my vehicle interiors and is big enough to hold a ball wrench inside as well. Cannot beat the price either for so much convenience and saved time.
The fit is a little loose. Installed on a 16 tundra
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Very sturdy ball mount. Very easy to install.
Fit and finish are great and is obviously a very well made ball mount.
# 3
Flash Secure Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Overall pretty good. Adjusting the height and locking the pins isn't the smoothest, but it works just fine. If the ball is close to the key hole it makes it hard to lock the pins.
This is my second adjustable hitch drop. I've had this same one in both Class 3 & 5. Both are good and very handy. It does sometimes take a little wiggle of the ball assembly as you try to turn the key to get it to lock into place. This is because you can't see if the lock pin is lined up with a hole exactly or not.
# 4
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
As advertized; the shipment arrived in very good shape due to heavy-duty packaging. Quality and strength was as expected; this Curt adjustable ball mount is sufficient to tow anything my Tundra is rated for. The requested Prodigy P2 control will fit in place of the Tundra ash tray.
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
# 5
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
should at leat include the pin to secure it to the hitch
super strong, solid bar which has now worn out at all. we had the tubing one and it only lasted a year but this is not showing any wear.
# 6
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
So far so good, easy install out of the box in "hidden mode", no assembly required.
Very nice unit. I have a 7000# gross weight trailer and couldn't legally use it to max capacity because most 2" balls are only rated at 6000#. The 2" ball on this is rated for 7500#. Additionally, with the adjustable drop, rise and three ball sized to choose from, this is the only hitch you will need.
# 7
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 5-1/2" Drop
Very nice hitch, and etrailer is a great company to purchase from.
great quality order here before and will in the future shipping super fast and always a great product
# 8
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Total piece of crap ..does not do what it claims… the cushion only has 3/8 of an inch latitude
2007 Toyota Tundra 5.7L, 7X14 Parker flatbed tandem axle utility trailer 7700 lb capacity. I've only used it once since purchasing it, but compared to my previous non-cushioned ball mount it does an excellent job cushioning the load and keeps the trailer from banging the mount in the box and shaking the truck upon braking and acceleration. Very nice when hauling 2+ tons of cargo. Fast shipping from etrailer too.
# 9
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
USA built, super solid construction, easily adjustable. This is the best hitch on the market in my opinion and well worth the cost. For reference, I tow with a 2014 Tundra that is lifted. The back end is 1" higher than stock and with the 5" drop/5.5" rise I've got plenty of adjustability.
Very well built. Smart design. Made in USA!
# 10
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Just what I needed 4 in rise. Well made.
This product is very heavy duty and the price was great. It fit perfectly and looks very good on the 2017 Toyota Tundra with a 6 inch lift. I would definitely recommend this product.
# 11
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Attaching the trailer was easy and provided me a higher comfort level when backing up to center the ball under the hitch because I had more room between the coupling and my Tundra. Additionally this product provided me the ability to open my Tundra bed door while my trailer is attached. Lastly it provides me a greater turning radius when backing up. I would recommend this product.
I searched the Internet for hours before finding a long shaft ball mount that would allow me to make sharper turns with boat trailers on the front hitch of my truck. The mount is well built with a great finish and should easily meet its 6,000 lbs. spec. Etrailer web site was easy to use, and the mount was delivered the day after I ordered it. The packaging of the mount was close to bullet proof.
# 12
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
Secure pin hole should be reamed after drilling. Fillet weld at top of receiver plate, shallow, operator of torch on wire feed needs to correct angle of torch and speed of fill metal application.
Slightly longer, so you can open your tailgate with a cargo trailer attached. Trailers with a tongue jack that is forward are problematic for tailgates...
# 13
Flash Simple 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Works great. With all the adjustments we can get our trailers to haul level now. Quality looks really good and it has the 2 size trailer hitch balls which makes it way more convenient.
VERY HAPPY, BUT STARTED TO SEE SOME RUST ON THE HITCH BALL AND ONLY USED TWO TIMES. THE VERSABILITY OF THE PRODUCT IS GREAT. OTHER THAN THE SMALL AMOUNT OF RUST ON THE BALL ITSELF, IM VERY SATISFY AND WILL BUY FOR MY OTHER TRUCKS.
# 14
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Product and pricing excellence is what etrailer is all about. They bakc it all up with great customer support. thanks etrailer.
Very sturdy ball mount. Very easy to install.
# 15
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black
So far so good, easy install out of the box in "hidden mode", no assembly required.
Very nice unit. I have a 7000# gross weight trailer and couldn't legally use it to max capacity because most 2" balls are only rated at 6000#. The 2" ball on this is rated for 7500#. Additionally, with the adjustable drop, rise and three ball sized to choose from, this is the only hitch you will need.
# 16
Flash Secure 2-Ball Mount w/ Chrome Balls - 2" Hitch - 4" Drop, 5" Rise
Fantastic product, amazing how strong the hitch is when it's only made from aluminum. One key works both the lock pins as well as the ball height adjustment which was what I was looking (and paid) for. Best hitch as far as I am concerned. I do wish it would have came with a storage bag (for those of us who don't feel it necessary to drive around with a hitch on).
Overall pretty good. Adjusting the height and locking the pins isn't the smoothest, but it works just fine. If the ball is close to the key hole it makes it hard to lock the pins.
# 17
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Great workmanship/quality and made in the USA.
# 18
etrailer Ball Mount Kit - 3" Rise or 4" Drop - 16,000 lbs
Fits my Tundra like a glove and don't have to worry it the trailer is going to break the tow hitch not with this one.
This is one of the items that has saved me a LOT of time. Since I use both my truck and my car (both have Curt hitches ordered from etrailer) for towing my half dozen or so different types of trailers, I am constantly needing to adjust the ball size and/or height depending on the combination of vehicle and trailer. With this kit is takes literally less that 30 seconds every time for me to configure to exactly my needs. Also, the bag is excellent for keeping crud and ball grease off my vehicle interiors and is big enough to hold a ball wrench inside as well. Cannot beat the price either for so much convenience and saved time.
# 19
Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 2" Drop - 15,000 lbs
Product arrived earlier than expected and it fit perfectly on my vehicle. I had conducted extensive research for an equivalent product and this was the best value for the price. I don't anticipate having any problems towing my trailer with this hitch. I put a locking pin on the hitch to discourage potential theft.
Great quality. Just as advertised. Expect it to work very well.
# 20
Convert-A-Ball Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 14,000 lbs
Total piece of crap ..does not do what it claims… the cushion only has 3/8 of an inch latitude
I purchased the AMSC10 because I needed a 10" drop hitch to tow my lowboy enclosed trailer with my lifted Toyota Tundra. I tried several other types of hitches with this towing combo and I was always disappointed. Mostly because of the fit/sloppiness of the ball mount into the receiver. This would cause a lot of noise and the feeling of the trailer "bucking" while hitting bumps and such. The other hitches that I tried were those cool aluminum ones, both a fixed one and an adjustable one. Although they were pretty, both left me very disappointed. The shipping for this hitch from Etrailer was fast and efficient. I received emails informing me of my order status throughout the whole process. Upon receiving my AMSC10, I tested it out and found it to be a much nicer fit into the receiver. Once I hooked up to the trailer and began to tow, the difference was extremely noticeable. This hitch is quiet, it doesn't buck, and in fact, comparatively, you wouldn't even know the trailer was behind you unless you looked. I am actually really excited about towing with this hitch. I know it sounds goofy, because it is, but it makes the task so much more pleasurable with the cushion ball mount. I'm already thinking about buying the 8" drop for my normal trailers.
What our customers are saying:
"Received already. Yeow! Perfect fit. Thanks for getting the kit to me so quickly."