# 1
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
This extension was just what I needed for my 06 jeep liberty,with the e-trailer 2"ball extension I can now pull my trailer without removing the spare tire off back door,plenty of clearance to open back door as well and with the drop of the hitch with the 2" ball trailer is level,after a year of use the chrome has not wore off and powder coating on hitch is still good,would highly recommened.
its long enough that I can hook up my small enclosed motorcycle trailer with the spare tire mounted on rear door of 2006 jeep liberty. I also had to replace the trailers jack that mounted in center of A frame with jack that went on side of toung like a boat trailer.
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Great products and service. I was able to order everything I needed to add a tow hitch and ball to my 2006 Jeep liberty. Very fast shipping. They even called me to verify orders and availability. Clear and easy to follow installation instructions. I hauled an [retailer] trailer from Texas to Ohio without any issues. Even bought a trailer and use it frequently for hardware stoe runs.
Purchased hitch ball, ball mount, hitch extender, wiring extension, safety chain extension, and storage bags for a Jeep Liberty. ETrailer has a great selection of products, with good prices, and fast shipping. We will definitely buy from them again. We have not had an opportunity to use the items purchased, but anticipate no problems.
# 3
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Haven't installed yet, but the item arrived on time without any problems.
Fits hitch and excited about putting it to use.
# 4
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Extra length worked out perfectly. Allows the camper to tow behind a jeep liberty without the spare tire hitting the jack handle. I even use it on the f-150 And can open the tailgate with the trailer attached. Thanks for the great description and prompt delivery.
This product is exactly what I needed to make trailering my Kayak easier. My Jeep Liberty has a spare tire that has interfered with the hitching and unhitching of the trailer. The extension works perfectly. The Item was at my door in three days and on my Jeep minutes later. Great purchasing experience.
# 5
etrailer Ball Mount Kit - Super Extra-Long - 3/4" Rise or 2" Drop - 6,000 lbs
It a hitch ball mount , well made
Great price good product
# 6
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
Perfect size for a 2004 Jeep Liberty with spare wheel on back. Very nice quality. I can now mount my trailer hassle free.
BM20 Long Drawbar. Perfect for my 2005 Jeep Liberty. I no longer have to remove the spare to tow. Solved what was a major pain!
# 7
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Great products and service. I was able to order everything I needed to add a tow hitch and ball to my 2006 Jeep liberty. Very fast shipping. They even called me to verify orders and availability. Clear and easy to follow installation instructions. I hauled an [retailer] trailer from Texas to Ohio without any issues. Even bought a trailer and use it frequently for hardware stoe runs.
Purchased hitch ball, ball mount, hitch extender, wiring extension, safety chain extension, and storage bags for a Jeep Liberty. ETrailer has a great selection of products, with good prices, and fast shipping. We will definitely buy from them again. We have not had an opportunity to use the items purchased, but anticipate no problems.
# 8
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 9
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 10
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 11
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Went in just like it was supposed to. Quick shipping as always.
The exact part number my hitch called for. The salesperson Lisa, was extremely friendly, and made the ordering process, as smooth as possible. Thank you for your great service etrailer.
# 12
Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs
Good prices, always a pleasure to deal with! Great folks.
Haven't used it yet. I bought it because of CURT's quality. It was beat up in shipping though.
# 13
Convert-A-Ball Cushioned Multi-Hitch Clevis and Pintle Hook Combo w/ 3 Balls - 2" Hitches - 10K
eTrailer is the best! Fast ship and no problems I'll be using the heavy duty hitch to haul my 5,500 lb boat and trailer from Texas to Michigan this spring.
No problems with the hitch- makes it easy to switch between trailers! I have no complaints!
# 14
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
The ball mount was a complete failure even after a lengthy discussion on the phone. I wanted a ball mount that would accept the rocker ball and anti-sway bar. The bar sent to me can't be used this way. An email and phone message to the sales person I ordered with, got no response.
# 15
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
Very versatile - can use it on both my vehicles that have very different hitch height. Clean welds, super solid. Weighs a LOT!
# 16
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
Extra length worked out perfectly. Allows the camper to tow behind a jeep liberty without the spare tire hitting the jack handle. I even use it on the f-150 And can open the tailgate with the trailer attached. Thanks for the great description and prompt delivery.
This product is exactly what I needed to make trailering my Kayak easier. My Jeep Liberty has a spare tire that has interfered with the hitching and unhitching of the trailer. The extension works perfectly. The Item was at my door in three days and on my Jeep minutes later. Great purchasing experience.
# 17
Gen-Y Torsion 2-Ball Mount - 2" Hitch - 2-1/2" Rise/5" Drop- 16K
First impression massive, heavy Built Stout. My truck is always hooked to a trailer so I figured I would try a nicer set up I was using the B&W which is great for the average Joe that just needs to pull a trailer every now and then but this is a whole new world first trailer I pulled with It I could feel the difference right away it was smoother the vibrations and harsh thump feelings that I would normally get when pulling the trailers when I hit rough roads or bumps was not as bad or gone. It definitely made a huge difference super easy to move height if needed and an added bonus I didn’t think of is that it pushes the trailer back further so you can get a little tighter turning when backing up if needed and i can open the tailgate and it won’t hit the jack on the trailer. On top of that when people see it it’s a conversation starter There are not many of these out there so they are intrigued by the size and how it works. Bottom line in my opinion if you’re towing all the time it is worth the investment. I would invest in another.
Built like a brick s@%thouse. Works great! Keep in mind I use this for pulling same trailer loaded same way every day. I could figure out optimal hitch weight and keep it there
# 18
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
definitely solid as a rock
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
# 19
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
Shipping was a mess, lost the first one in the mail somewhere because no one thought a 50# hitch would punch through cardboard. It is working as expected, but does not seem to be a true 2" drop.
Easy ordering, fast shipping and a quality product. I can't believe how much this Brophy Ball Mount Hitch weighs! Incredible.
# 20
etrailer Ball Mount Kit - 3" Rise or 4" Drop - 16,000 lbs
It a hitch ball mount , well made
Great price good product
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"