Best 2004 Chrysler Pacifica Trailer Hitch Ball Mounts

Haven’t used it yet, but looks good. I’m not sure what height offset I need, so this kit gives me several options, plus two ball sizes. Really good value.

Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!

Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.

Click to Enlarge

Like Always a great interaction with etrailer. Fast shipping everything in the box and great people on the phone to help you and great videos to help with installation have not put it on the var yet

Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.

Click to Enlarge

I am very pleased with the hitch, ball mount, and electrical package. All were easy to install if you follow the easy to understand directions. An added plus for putting one of these on a MINI is that the hitch can be hidden behind the "black plate/cover" that is on the rear bumper. It looks just like it came out of the factory except when to need to install the ball mount. The service has been outstanding. This is the place to go.

Click to Enlarge

Click to Enlarge

Strong and works perfectly!

Great product, Fast shipping, Good Price

This is a great product, well built and matches my chrome bumper. My truck is lowered so I needed a sturdy product with a good rise to compensate. This hitch, along with the Roadmaster Quiet Hitch from etrailer and the Fastway Trailer Hitch locks work together nicely.

Click to Enlarge

Looks hefty enough to handle my needs. I have a mobile auto repair utility trailer, also a light duty trailer I use on the weekend. this Fastway adjustable hitch gives me the versatility without needing several different hitches. THIS WORKS NICE!

I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.

Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.

Purchased for a Dodge Journey with vertical mount hitch. Waited 5 months to get one from Chrysler and finally gave up found this one online. Sturdy design and does what I need it to. My only complaint is there is no recessed slot for the hitch ball to screw in tightly.

Tried to get this from the Dodge who put on the hitch. After six weeks of waiting I called you and got it in two days. Thanks.

The hitch works great. The service was excellent!!! I'm going back and having a hitch put on my other car soon. Thank you.

Everything was perfect.! Nice paint, package, and fast shipping.! Im satisfied.!

Click to Enlarge

I would give five stars but due to what looks like packaging problems the hitch came very marred and the coating chipping off.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Good and strong but not a great angle/height for my application so had to go to a straight line fit.

Needed a large drop hitch to pull my car trailer. This item came quickly and worked perfectly.

This extreme rise ball mount is what I need to make my passenger car into a back-up trailer puller. It is well built and has a welded strut to reinforce the long rise/drop ball mount. The "shock damper" feature is sure to help absorb the leverage movement that a rise/drop ball mount passes on to the hitch receiver itself.

Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!

My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks

Click to Enlarge

Click to Enlarge

Click to Enlarge

Like Always a great interaction with etrailer. Fast shipping everything in the box and great people on the phone to help you and great videos to help with installation have not put it on the var yet

This is the correct towbar for a Toyota Prius C. The towbars that are available from U-haul (3 1/8") and other hardware stores are too low to the ground for most trailers. I tow my Harley Dyna on a motorcycle trailer behind my Prius C with no problem. Save yourself the grief. I bought three readibly available tow bars until I found the right one. The 5" rise, 10" long works perfectly. This is an incredibly strong drawbar.

Click to Enlarge

Worked perfectly Did have to grind off the paint and a nit of metal to fit in the reciever though.

The product was well described on the web site. The truck matching worked great and was easy to use. This hitch was very easy to order and the price was good. The delivery date was correct, it was easy to follow with the information provided. The hitch was as advertised, easy to install and easy to use. Great Job!

Click to Enlarge

First of all, ETRAILER is a great company in my opinion. Their selection, prices and customer service are all great. This hitch is stout! I'm the type that I'd rather have more capability than what I may actually use. For what I will use this for, I'm 100% sure it will be way more than I'll ever need but I'm also confident that I would not have any issues using it regularly at it's maximum capability. The construction of it is top notch and I'd be willing to bet it can do more than what it's rated for. I will definitely be ordering the 20K Pintle that works with this as well as a Curt 5th Wheel and Gooseneck. Thank you ETRAILER and thank you CURT for amazing service and and amazing product.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!

Click to Enlarge

Works great used for 3 different trailer we have handy it's heavy well made.

Excellent customer service & support! Bought for my 2013 Honda Fit and plan to trailer my Yamaha Tenere motorcycle around North America! Very happy with hitch.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Typical quality of...VERY good!! Lol. I've pulled my small mc trailer numerous times with this hitch and NO issues!!!

Was needing a 7-8 inch ride for my camper that could sustain a GVW of at least 5000 lbs. Let me say, it’s a hard to find item. Thankfully I called Etraer and with some research, found me the perfect ball mount. It’s heavy duty for a reasonable price.

I had to flip this upside down and put a hitch ball on this to get it to work with my Dodge Journey and my camper. It's held up without issue for a half-dozen camper pulls. I wish the paint hadn't already started flaking off at the receiver end, but that's to be expected when you connect metal to metal. The other parts of this haven't started flaking yet after a year so hopefully it continues to hold up.

Excellent Web site, easy to navigate, great prices, easy purchase experience, fast delivery. I had someone install the hitch - all good, looks great - no photo, but take my word - it looks great on my 2003 Buick Rendezvous. An easy, "Five Star" rating (Web sales experience and hitch).

Like Always a great interaction with etrailer. Fast shipping everything in the box and great people on the phone to help you and great videos to help with installation have not put it on the var yet