# 1
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
I recently installed a #76156 Draw-Tite Hitch on a 2016 Toyota Highlander. I used a multi-tool with a standard cutting blade to trim the splash guard and exhaust deflector. The vehicle had been Zei(xxxx) rustproofed, but, as I expected, uncoated areas were discovered when the splash guard and spare tire were removed. I treated the areas with a quality spray can undercoating before and after the hitch installation. I checked tyhe condition and pressure of the spare, and sanded some rust and sprayed a little black paint on the rim. I re-used the longer bolts for the tow hook to anchor the passenger side of the hitch, but did not cut the fascia. I sprayed all six holes and the bolts with lithium grease before installing the hitch. Here are the photos of the result. Hope this helps.
Solid build, but there is a lot of play, which causes rattling and the associated annoying sound when pulling a trailer or having any other hitch mount. You can buy one of the anti-rattle devices on this site or make a DIY fix. I used thin rubber from the trim scrap of the back cargo area protector and duct tape. You can layer the duct tape until you get a tight fit. Just be sure to overlap the insertion end of the tube and fold the tape inside so it doesn't catch upon insertion.
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
A very good product.
This is a great ball mount for my Draw-Tite 2 inch hitch. It has a 1 inch ball hole and 5/8 inch pin hole. Mine came with the hitch pin, but I use a locking one that I purchased separately so it would be much harder for a would-be-thief to take. When not in use, I take it off and store it my trunk area. As with the Draw-Tite hitches, this ball mount is very well made and suited to the task of towing. Another great product at a great price!
# 3
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Trailer hitch looks great, will work great this spring for trailer hauling projects.
Needed a class III Ball Mount and Susan from etrailer.com provided excellent customer service skills helping me pick out the correct one for my Highlander. It fits great, is secure, and tows my trailer with no problem. Thanks, Susan!
# 4
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
A very good product.
After balking at the cost to have an auto-shop add a trailer to our Toyota Highlander, we found etrailer.com and decided to take a chance. The "how to" videos factored considerably in our decision to buy ... they made it look so easy! And surprise! It really -WAS- that easy. We used standard block-type ramps (the kind you can buy for $40 ) to get the SUV up off the ground high enough to get underneath to do the work. Everything came off as easy as it was showed in the videos. Other than the fact this bar is a heavy so we had our teen daughter help hold it steady while we bolted it into place (i.e., get help for when you go to lift it), it went super smooth. Thanks for saving us $280 over the cost the car dealer quoted us! P.S. - be sure to watch the linked videos so you get the right trailer lighting attachment and ball hitch for your new hitch.
# 5
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 6
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Super solid mount at a great price. Just the right drop for my boat trailer.
Works great!! I always order from etrailer Customer service and fast delivery
# 7
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
A great product- this thing is solid and well made. I love the double powder coating. I only wish the video review would have mentioned the shank length for the ball. They reviewed everything but the length. Trailer has always provided excellent service and truly provides great products.
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
# 8
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
The biggest issue I have is that the video on the receiver said the rise can go up or down. I try to put the ball in the hole in the rise position and it does not seat all the way the way it does in the down position. Not sure if I can Seat by drawing down the nut or not .
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
# 9
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
It fits nicely and arrived quickly. Easiest installation ever! Thanks!
Works great!! I always order from etrailer Customer service and fast delivery
# 10
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 11
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 12
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
Works great!! I always order from etrailer Customer service and fast delivery
I seldom take the time to write a review but I felt compelled to share my excellent overall experience with etrailer.com. I ordered the C13200 trailer hitch receiver, 2" ball, 2" ball mount receiver, pin/clip, and C56217 wiring harness for my 2017 Toyota Highlander XLE. All arrived in no time and in excellent condition. The installation videos and PDF documents are outstanding. I installed the hitch receiver in roughly 45 minutes - includes time to convince brother in-law to come over to help hoist it into place. Wiring harness installation was a breeze, roughly 20 minutes (again, great instructional videos). I could not be happier with the finished product. Thanks etrailer.com for making this a trouble free installation. If you are considering adding a hitch, etc. go no further, you are at the right place...order away. Its very easy to install and you will save a trailer load of cash!!!
# 13
etrailer Ball Mount Kit - 3/4" Rise or 2" Drop - 7,500 lbs
I recently installed a #76156 Draw-Tite Hitch on a 2016 Toyota Highlander. I used a multi-tool with a standard cutting blade to trim the splash guard and exhaust deflector. The vehicle had been Zei(xxxx) rustproofed, but, as I expected, uncoated areas were discovered when the splash guard and spare tire were removed. I treated the areas with a quality spray can undercoating before and after the hitch installation. I checked tyhe condition and pressure of the spare, and sanded some rust and sprayed a little black paint on the rim. I re-used the longer bolts for the tow hook to anchor the passenger side of the hitch, but did not cut the fascia. I sprayed all six holes and the bolts with lithium grease before installing the hitch. Here are the photos of the result. Hope this helps.
Solid build, but there is a lot of play, which causes rattling and the associated annoying sound when pulling a trailer or having any other hitch mount. You can buy one of the anti-rattle devices on this site or make a DIY fix. I used thin rubber from the trim scrap of the back cargo area protector and duct tape. You can layer the duct tape until you get a tight fit. Just be sure to overlap the insertion end of the tube and fold the tape inside so it doesn't catch upon insertion.
# 14
etrailer Ball Mount Kit for 2" Hitches - 3/4" Rise or 2" Drop - 7,500 lbs
# 15
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Items packed well delivered on time. Doesn't get much better that that.
The service is great and so is the price. Box came damaged but if it installs as easy as the last one I bought from etrailer I will be very happy!
# 16
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
Nice finish, hopefully will hold up over time. Unfortunately it is rather loose inside the 2" hitch hole, I don't understand how hard it is to get a tighter tolerance. We used some electrical tape as others suggested, but I would expect more from this brand.
This is a beast of a drawbar, solid forged steel & well finished. It's also very heavy and E-Trailer needed to ship 3 times because the first two broke out of the box they were packed in. (Someone in the USPS has a couple nice draw bars.) Fortunately the 3rd effort was much better packed in a reinforced box and was successfully delivered. E-Trailer customer service was exemplary in resolving the shipment issue & I will definitely shop with them again.
# 17
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
definitely solid as a rock
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
# 18
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs
Works fine, maybe a bit too long of a drop for a 2022 Highlander Hybrid
# 19
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
Fast shipping
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
# 20
Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 9-1/4" Long - 16K
Nice finish, hopefully will hold up over time. Unfortunately it is rather loose inside the 2" hitch hole, I don't understand how hard it is to get a tighter tolerance. We used some electrical tape as others suggested, but I would expect more from this brand.
Perfectly as described, Box was a heavy hitch and the box must have been damaged in shipping so it was a little delayed. You can't mess up a forged hitch it still is in excellent condition.
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."