Best 1995 Toyota Land Cruiser Trailer Hitch Ball Mounts

Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!

Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.

Click to Enlarge

Everything I need and in a nice bag for easy storage in the vehicle. Arrived with the hitch on time.

Haven’t used it yet, but looks good. I’m not sure what height offset I need, so this kit gives me several options, plus two ball sizes. Really good value.

Prompt delivery. Works perfectly on my BJ45 Land Cruiser pulling a small trailer. Made in USA was a must for me. Great product.

wonderful craftsmanship, very nice piece

Prompt delivery. Works perfectly on my BJ45 Land Cruiser pulling a small trailer. Made in USA was a must for me. Great product.

wonderful craftsmanship, very nice piece

Prompt delivery. Works perfectly on my BJ45 Land Cruiser pulling a small trailer. Made in USA was a must for me. Great product.

wonderful craftsmanship, very nice piece

Unfortunately this did not work for our situation. We did not receive on time as we paid for Thursday delivery and received it Friday. Our sales rep James was very helpful and extremely kind!! That’s what we look for in customer service!! He’s a keeper!! Lol

Click to Enlarge

Click to Enlarge

Click to Enlarge

Just received my adjustable B&W Hitch today & I love it! Very heavy duty & it will solve my problem with my F-150 has a 6” lift with 35” Nitto Tires. Want to be able to tow a small trailer, boat or Ursula if ever need to so this will certainly do the job. Thank you! My only issue is you don’t receive a locking pin with it & as much as it cost I think it should be included .

Click to Enlarge

Click to Enlarge

Click to Enlarge

Prompt delivery. Works perfectly on my BJ45 Land Cruiser pulling a small trailer. Made in USA was a must for me. Great product.

wonderful craftsmanship, very nice piece

Great product and very helpful folks to talk to. I’ve ordered from etrailer many times and it won’t be my last.

This hitch is a very handy addition to my toolbox! I work for a county road department, and I’m always pulling different trailers to and from job sites. I can switch from a 2 5/16” ball hitch, to a pintle hitch with the flip of a lever! Thanks B and W!

Prompt delivery. Works perfectly on my BJ45 Land Cruiser pulling a small trailer. Made in USA was a must for me. Great product.

wonderful craftsmanship, very nice piece

The 3” drop is perfect for a stock 4x4 Silverado 1500. I can tow my small trailer as well as my full size tandem axle trailer without changing hitches/balls. Just what I wanted.

Click to Enlarge

Click to Enlarge

Maybe add locking pins or somehow to lock

I purchased this hitch to pull my pontoon and utility trailer and needed it to be adjustable for the different trailer heights. I also wanted a hitch that had a feature to remove the play in the hitch which helped reduce sway in the trailers. It also eliminates clunking when stopping and accelerating. It is a very nice, well made heavy duty hitch and is easy to adjust with the notches on the hitch to let you know where you are at.

The solid-tow ball mount eliminated the half dozen other inserts I had to rotate thru to haul the different personal and work trailers I towed last year. I used it with my 03 gmc 2500hd and then switched it to my 2012 2500hd. The newer 2-1/2" hitch uses a reducing sleeve to 2". It does have more slop, because the friction pin doesn't contact the outer housing, rather the sleeve. However, this ball mount is an excellent design and works great. And, it's not likely to be stolen. I would recomend it to anyone, as long as they are at least slightly mechanically inclined. It is a little complicated at first.

Very strong, easy to install and very secure. Yes a bit pricey, but well worth the money. I did notice there was what I thought was an unusual amount of play in the receiver. I called etrailer and Marcia was so very helpful and very concerned that I may have received the wrong product. She even called the manufacturer and found out what the changes that were made by the manufacturer which made the pictures incorrect. My hat is off to Marcia and all the folks at etrailer

Click to Enlarge

ball mount fits loosely in the receiver so that the pins that extend out from the ball mount shaft through the holes in the receiver don't extend out far enough, for my liking. This is because since the ball mount shaft has so much play, it will shift to one side. Then, the pin on the other side does not extend all the way out of the hole so that it is not flush. True, i am being paranoid. However, i imagine a case like a crash where enough force could pull the shaft out from the not fully extended pin side to release the trailer to wreak more damage. I would just feel more secure if the pins went out further through the receiver or the shaft was not so loose. Otherwise, i really like the product a lot... enough to give it four stars... :o)

Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.

Click to Enlarge

I am very pleased with the hitch, ball mount, and electrical package. All were easy to install if you follow the easy to understand directions. An added plus for putting one of these on a MINI is that the hitch can be hidden behind the "black plate/cover" that is on the rear bumper. It looks just like it came out of the factory except when to need to install the ball mount. The service has been outstanding. This is the place to go.

Click to Enlarge

Click to Enlarge

Hello The hitch works great as viewed in the enclosed pictures. If inverted it hits the bumper, of my Dodge 2500. The section that goes into the receiver is about 1/2" too short and hits the bumper. I have not tried it on my other vehicle to see if this is a problem. Kind Regards Leon D

Click to Enlarge

A VERY nice piece that will set your mind at ease. Easy to adjust height. The ONLY thing I wish is there was an option to have different sized ball combinations. I mainly use 2" and NEVER use a 2 5/16"(or whatever the larger size is) and would prefer to have a 1 7/8" on the other side.

Click to Enlarge

Prompt delivery. Works perfectly on my BJ45 Land Cruiser pulling a small trailer. Made in USA was a must for me. Great product.

wonderful craftsmanship, very nice piece

I ordered my AM3405 and was amazed how quickly the etrailer team responded with not only my order confirmation but the fantastic follow up when it was shipped and delivered. I highly recommend etrailer and will order from them again. The product showed up in great shape and I am very happy with the quality. One recommendation would be to order two of the locking pins. One for the receiver and one to lock the ball mount to the unit. You will see by my picture I resolved that issue with a pad lock but the locking pin would have been better.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This hitch is beautiful.

Click to Enlarge

Click to Enlarge

Sooooo....you sent me a product that was somehow put together backwards and I cannot take them apart somehow the ballhitch is stuck on the male portion backwards and defies gravity and doesn’t need a pin to stay on(becaue thier is no where to put the pin in cause it’s backwards

Click to Enlarge

Have done about 5k with this hitch, just once with a 4500lb camper but mostly with a 3000lb cargo trailer. The former in a highly raised position and the latter in the absolute bottom position. The hitch has worn very well and shows no signs of excess wear, save for the surface of the 2" ball, but it's not concerning. On a Jeep Grand Cherokee with a stock suspension, this seems to give the right balance of range of adjustment without dropping so low in the lower configuration as to scrape through dips, though it can still be done on very sharp dips with the hitch on the lowest setting. Overall, very pleased with it and love that it's lighter than steel and won't rust.

I installed this on my 2015 Honda Accord for the purpose of pulling my small aluminum fishing boat and trailer. Works great!

Click to Enlarge

Rusts easily. Chrome is non existent.

Great service!

Excellent hitch. I like that it is made from one piece of solid aluminum and so much easier to lock and unlock. No more fumbling around under the bumper trying to unlock the hitch pin.

Click to Enlarge

Just what I'd hoped for. Extremely light-weight and easy to install/remove. Perfect mount for my new Jeep Cherokee!

Click to Enlarge