The best technical support and full Bed Extender installation instructions. Lowest price Pickup Bed Extender guarantee and expert service. Toyota Pickup, 1992 Bed Extender by Topline are available from etrailer.com. For expert service call 800-298-8924 to order your Fold Down Truck Bed Extender - Anodized Silver part number BX4004-01, or order online at etrailer.com.
$229.95
Select Your Vehicle

View Cart


Truck Bed Extender > 1992 > Toyota > Pickup

Topline Bed Extender for the 1992 Pickup by Toyota

Topline Bed Extender

(7 reviews)


Retail:$273.66

Price:$229.95


Shipping Special

Shipping Weight: 18.63 pounds

Quantity: 






Fold Down Truck Bed Extender - Anodized Silver - 1992 Pickup by Toyota

The Top Line Manufacturing universal fold up bed expander is great when hauling loads just longer than the truck's bed, but not longer than the tailgate.

Features:

  • Bed extender telescopes to fit almost any size pick-up
    • Expands from 48"
  • Takes up only 5" of truck bed when not in use
    • Bed extender folds down flat on tailgate
    • Virtually disappears when tailgate is folded up
  • Bed extender will work with tonneau covers or truck caps
  • Constructed of stainless steel and anodized aluminum to resist corrosion
    • Lightweight, yet durable
  • Easily removes with just two release pins
    • Takes about 30 seconds to remove


Specs:

  • Extender sits 15-5/8" tall along the back and 12-1/4" tall along the side
  • Minimum width: 48"
  • Maximum width: 62"
  • Color: Silver
  • Trimming of bed liner may be required for installation
  • Product requires drilling to install


Fold down truck bed extender

Fold down truck bed extender

stainless steel bracket

The bed extender is mounted securely with stainless steel hardware to one bracket on each side of the truck's tailgate.


bed extender pull pin release

To remove the truck bed extender, just pull the pins.


bed extender folded up

Bed expander folds up, leaving all but 5" of the bed available for cargo.





BX4004-01 Fold Down Truck Bed Extender - Anodized Silver





Video of Fold Down Truck Bed Extender - Anodized Silver


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.



Video Transcript for Topline Fold Down Truck Bed Expander Review

Today we're going to review an install, the Top Line fold down truck bed extender, part number BX4004-02. Black in color. This application is also available in silver, part number BX4004-01. Let's go ahead and take a look at the top line tailgate extender that's all ready been installed. Simply open up the tailgate, we'll pick the extender up and swing the arm out and lock it in place. The arm is secured to the extender with the clamp, we pull it free, lift up on the spring-loaded button and it locks in to place. Just like that, our tailgate extender is up and secured. To get an idea, we'll go ahead and take a measurement from the end of the pickup bed to the inside edge here on the corner.

We've added 22 1/2 inches to the length of our pickup bed using our tailgate extender. Now we can go ahead and fold up the tailgate extender and we can see, in it's stored position, it takes up approximately 5 1/2 inches of overall width. It doesn't take up a bunch of room in our pickup bed when our extender is in the stored position and our tailgate is up. Notice that the tailgate extender has a total of 4 squeeze clamps. These clamps firmly hold the extender in position, so it doesn't swing or bang around when you're in the stored position and going down the road. Another really nice feature is how easily our tailgate extender will come off. We've got 2 quick pins that are held in to place with a D10 ball and it's got a nice cable to keep it.

Simply take it out of the bracket on both sides and, because our clamps are holding it together, we can simply take it off as one unit and set it aside. Therefore, opening our tailgate back up so we can use it for other applications. That does it for the review of our tailgate extender. Now let's go ahead and show you how to install it. We'll go ahead and put our truck bed extender on to the tailgate. Next, we'll loosen our clamps so we can extend it to the width of the tailgate.

We have 4 clamps on each side for a total of 8. You can use the Allen Wrench that's provided with the install kit or if you have one on a socket, like we do, makes your work a little faster. Now with our clamps loose, we'll take the bed extender and slide it out so that we can get it to the width of the pickup bed. Now that we've got the driver's side slid out, we'll go ahead and move over to the passenger side and repeat the same process. Once I have both sides slid out to equal lengths, to double check it, I can always go ahead and measure from the center support to the outer support on both sides and make sure I've got equal lengths.

Once we've confirmed we've got equal lengths, we'll go ahead and tighten down the clamps to hold it in place. In selecting our mounting location, we're looking for a good, flat service to attach to. We want to slide all the way over so we get the maximum width, but we don't want to interfere with the latch. I'm, also, going to come all the way out to the top cap of the tailgate. This will give me maximum width and length. In choosing our mounting location each one of the attachment points needs to be on the same level or flat surface. We have one in the front, middle and here at the end on the bottom bracket that attaches to the tailgate.If I slide over a little bit, we can see that the front attachment point is on an uneven surface compared to the center and rear attachment point, so we'll need to slide it down the tailgate so all three attachment points are on the same flat and level surface. There, now we'll go ahead and duplicate this on the other side because each process we do here to one side gets repeated identically on the opposite side. Some applications, like this one, where you want the extender to be at the very outer edge of your tailgate; the very top edge of your tailgate, or, could possibly need to be modified so that all three attachment points are sitting on the same level surface. We're going to go ahead and notch out the tailgate cap. Using my marker here, I'm going to draw a couple lines so they cut out for our bracket. Once I have it marked out I'm going to slide my extender out of the way and use a rotary tool to cut out the plastic. You could also use a utility knife. Just be careful as you work through the thick plastic. Now that we have it cut out, let's go ahead and slide it in to place, make sure we've got a good fit. Once you've got your tailgate extender in position, we're going to hold on to the bracket as we rotate the extender up. It's a good idea to get and extra set of hands to do the passenger side while we're doing the driver side. We'll rotate it up while holding the bracket in place and then we can use our paint marker or, in this case, I'm using a permanent marker to mark the forward and center attachment points. We're going to go ahead and pull the pin that removes the extender from the bracket. Make sure that our bracket is lined up with our previously marked attachment points and then mark our third attachment point that was underneath the hinge point of our extender. All right. Now with all three holes marked, we'll go ahead and remove the bracket. We're going to use our center punch on each of our attachment points and then drill it out. To drill it out we're going to use a step bit process starting with a smaller pilot bit and then working out way up to our final size. Our final size will be just large enough so that we can get our fastener in to the tailgate. Now with our holes drilled out, we're ready to install the insert. The insert will go in to the hole and then turn. Our screw will go down through the top, in to the threaded portion of the insert that'll get pulled up tight to the tailgate to create our attachment point. Let's go ahead and install it. We'll slide it in. You'll see that the top side is beveled so that as the bolt gets pushed in, it'll turn the insert. Sometimes they like to hang up, so I recommend to go ahead and get it started with your screw driver. Now we'll go ahead and repeat the remaining fasteners just like we did these two. Next, we're going to install the gasket. The gasket will go down, over the attachment points and then our bracket sits inside that gasket. We want to make sure that the gasket is well seated all the way around. We'll put it in place, setting it over the attachment points and using the Allen-headed screws provided to secure it. Note, each one of our fasteners will get Loctite on the threads. That's provided with our install kit. Let's go ahead and break off the top and put it on to the bolt. After we put the Loctite on, we go down through the bracket, through our gasket and in to the insert we installed in to our pre-drilled holes. I recommend to tighten them down, finger tight, just to get them started. It's a little harder to do here with our hinge here on our third attachment point, so you might go ahead and take the Allen-key that's provided, to help get it started. Now that we have all three started, let's go ahead and tighten them down. Now that we have both of our brackets installed, tightened down and secured, we'll go ahead and reinstall the extender. The extender installs with our quick pin. It goes through the bracket, through the extender and then back through the bracket. Once we have our quick pins in, we can store it in the folded up position and even close our tailgate. And just like that, our bed extender is installed and we're ready to hit the road. That will do it for the review and install of the Top Line fold down truck bed extender, part number BX4004-02. .


1992 Pickup by Toyota Owners Who Purchased this Bed Extender Also Bought...



Replacement parts available for this product






Toyota Pickup Accessories




Customer Reviews

Fold Down Truck Bed Extender - Anodized Silver - BX4004-01

Average Customer Rating:  4.7 out of 5 stars   (7 Customer Reviews)

The Top Line Manufacturing universal fold up bed expander is great when hauling loads just longer than the truck's bed, but not longer than the tailgate.


- BX4004-01

by: Andrew K.03/24/2012


I really like this product. Unlike the others this folds out of the way. It's built pretty good and the latchs catch tight. Bottom line is that I'm glad I bought it. One word of caution: watch what's under the drill mark you need to have about and inch for the fittings to work (my gate latch was under my middle hole and I didn't realize it until I had all ready drilled so I couldn't use that one) Like the instructions say though you really only need the #1and #3 holes to work on a small tailgate. If I really want to I could drill new holes. 35033






- BX4004-01

by: John H.10/30/2012


The ordering and shipping process was very smooth, Parts arrived earlier than I expected, The product itself is what I expected, however the mounting bolts are a weak link, I was only able to use 1 of the 4 supplied as they came apart, very poorly constructed. I had to purchase a make shift anchor to finish application. The product is fine and the mounting anchors were not acceptable. 58394






- BX4004-01

by: Lisha and Howard07/11/2011


We HIGHLY recommend this bed extender! Do not hesitate to purchase this item. For the money we spent, it was sooooo easy to put together. It is very easy to close up as well when you don't need it. 19101






- BX4004-01

by: Mark L.08/01/2011


Shipment arrived very fast and install was quick and easy. Works perfectly with my 2005 Toyota Tacoma. 20722






- BX4004-01

by: Bill02/20/2007


Strongly recommended! easy installation, realiable and good for the money. 74






- BX4004-01

by: lew l.01/09/2015


Well constructed. Installation a breeze. 168400






- BX4004-01

by: william cottone12/15/2011


looks great 28188




7
7


Ask the Experts about this Topline Bed Extender
Do you have a question about this Bed Extender?


  • Will a Bed Extender Fit a Ford Explorer Sport Trac with a Bed Liner
  • The Topline Bed Extender, # BX4004-02, will fit if you have a bed liner. However, you may find that you will have to trim the bed liner on some vehicles. Since every vehicle and bed liner combination is different, I cannot say for certain if you will need to trim or not. On an Explorer Sport Trac, you will need to measure the width of the bed where the extender will fit. If it is 48 inches or greater in width, the extender will fit. We also have the Topline extender with an anodized...
    view full answer...

  • Will the Topline Fold Down Truck Bed Expander Fit on a 2013 Toyota Tacoma
  • Yes, the Topline Fold Down Truck Bed Expander, # BX4004-02, will fit your 2013 Toyota Tacoma. In fact, we had a customer install this on a 2013 Tacoma, so I attached his install photos that he submitted for you to check out. I have also attached an installation video that we made on a GMC Sierra for you to check out. It will show how to install the bed expander. This item is also available in anodized silver as part # BX4004-01.
    view full answer...

  • Installation of Topline Truck Bed Expander # BX4004-02 in 2013 Tacoma 4X4 Longbed with Plastic Liner
  • The Top Line Truck Bed Expander, part # BX4004-02, is a universal-fit item intended to fit a broad range of truck tailgates. Installation processes will vary slightly between vehicles and based on the presence of features such as tail gate liners, as on your 2013 Tacoma 4X4 long bed. The linked video shows installation of the silver version of the expander, part # BX4004-01, in a different make and model truck. The expander itself can adjust in width from 48 to 64 inches and clips into...
    view full answer...

  • Bed Extender for a 2007 Chevy Silverado Crew Cab New Body
  • We offer several bed extenders for your Silverado. For instance, the Top Line Bed Extender, part # BX4004-01 for silver or part # BX4004-02 for black would be a great choice. This extender will fold flat against the inside of the tailgate when not in use. When folded, the extender will allow full use of your truck bed. To see the entire list of extenders available for your truck, use the link below.
    view full answer...

  • Will the Topline Bed Extender Fit on a 2011 Ford F-150 with Factory Plastic Drop In Bed Liner
  • Drilling is required for installation of the Topline Bed Extender # BX4004-01, but the installation instructions indicate that the Ford F150 full size trucks have tailgates with two holes on each side that can be used. If you remove the screws from these holes, you may use them instead of drilling, but you will still need to drill the aft hole in the tailgate, see drawing link. The bed extender will work with plastic bed liners. If your trucks plastic bed liner includes a tailgate cover...
    view full answer...

  • Will Top Line Folding Truck Bed Extender Part # BX4004-02 Fit 2006 Nissan Frontier 4-door Crew Cab
  • The Top Line Folding Truck Bed Extender, part # BX4004-02, is a universal-fit bed extender that will fit both narrow and standard bed size versions of the 2006 Nissan Frontier. This bed extender is made of steel and anodized aluminum and adjusts from 48- to 64-inch width. Top Line also offers this product in a silver finish, part # BX4004-01. My contact at Top Line did not indicate any special installation notes for your vehicle. However, if your truck has a bed liner it may be necessary...
    view full answer...

  • Will Topline Bed Extender BX4004-01 Fit on a 2007 Toyota Tundra with a Bedliner
  • You should not have a problem installing the # BX4004-01 bed extender on your 2007 Toyota Tundra, but you will probably need to trim away some of the bed liner in order to install the mounting brackets. The bed extender installs using two mounting brackets, one on each side of the tail gate. The bed liner trimming should be minimal, as these would basically be the only two points that would be obstructed. To get a visual of where you might need to trim, I recommend taking a look...
    view full answer...

  • Color Options for the Topline Fold Down Truck Bed Extender
  • The Topline Truck Bed Extender is available in anodized silver, # BX4004-01, and black # BX4004-02. The bed extender is adjustable in width from 48 inches to 64 inches. It is 15-5/8 inches tall at the back and 12-1/4 inches tall on the sides. I have attached an installation video for you to check out.
    view full answer...

  • Installing Topline Truck Bed Extender #BX4004-02 on 1998 Toyota Tacoma with Factory Tail Gate Cover
  • The Topline Truck Bed Expander, part # BX4004-02, is a universal-fit item intended to fit a broad range of truck tailgates. Installation processes will vary slightly between vehicles and based on the presence of features such as tail gate liners, as on your 1998 Tacoma. The linked video shows installation of the silver version of the extender, part # BX4004-01, in a different make and model truck. The extender itself can adjust in width from 48 to 64 inches and clips into the two steel...
    view full answer...

  • Bed Extender for 2007 Toyota Tacoma Crew Cab Short Bed
  • This is an adapter kit for a Nissan Frontier or Titan to allow the tonneau cover to fit when you have a bed extender. We do not have a bed extender that will slide up to the cab, but we do have a bed extender for a 2007 Toyota Tacoma crew cab short bed. I suggest either the Fold Down Truck Bed Extender - Anodized Silver (part BX4004-01) or in black (BX4004-02). This simply mounts on the end of the bed and folds up. I have included links to both of these products below.
    view full answer...

  • Will the Topline Truck Bed Extender Fit a 2012 Toyota Tacoma with a 6 Foot Bed
  • The Topline bed extender, # BX4004-02, will fit your 2012 Toyota Tacoma. We also have this same extender in silver, # BX4004-01. You might also be interested in some ramps, like # CE26151PG, to help get the bike in the truck. This ramp is 60 inches long and 8-1/2 inches wide.
    view full answer...

  • Will Topline Bed Extender, part # BX4004-01, Fit 2009 Toyota Tacoma Double Cab Short Bed
  • The Topline Bed Extender for the 2009 Toyota Tacoma, part # BX4004-01, will work on your 2009 Toyota Tacoma Double Cab Short Bed. I have a AnchorTrax Truck Bed and Trailer Cargo Control System w/ Sliding Tie-Downs - 1 foot Long, # AT3375, that might work for a stronger tie-down in the front of your truck bed. It is (2) one foot long tracks that attach to the bed and has adjustable D-rings for different cargo sizes. The rings have a 3,000 lbs. break strength and a 1,000 lbs. load limit....
    view full answer...

  • Will Kwik Gate Bed Extender # KG48 Fit the 1998 Nissan Frontier 2-Door Extended Cab
  • The 48-inch Kwik Gate Bed Extender # KG48 is considered to be a near-universal-fit item that can work in a broad range of truck beds. It includes all mounting hardware as well as a drill bit and wrench to ease installation. If your tail gate is 53-inches wide then this unit should fit, although there may be gaps at either side of the gate. The center section of this gate removes easily (but the side rails remain bolted in place.) We also offer adjustable truck bed extenders for your...
    view full answer...

  • Will Topline Bed Extender # BX4004-02 Fit a 2001 Ford Explorer Sport Trac
  • The Fold Down Truck Bed Extender, # BX4004-02, is designed to fit as many different trucks as possible. It will need a minimum of 48 inches to fit. If the tail gate on your 2001 Ford Explorer Sport Trac is at least 48 inches wide and no greater than 64 inches wide, it will fit. The extender folds up flat against the tail gate when not in use and it will be 15-5/8 inches tall and protrude 5 inches into the bed when folded and the tail gate up. There are many different types of tonneau...
    view full answer...

  • Will Topline Folding Truck Bed Expander # BX4004-02 Fit a 2013 Nissan Frontier 4-Door Crew Cab
  • The Topline Folding Truck Bed Expander, part # BX4004-02, is a universal-fit product that will work in a wide range of truck beds from 48- to 64-inches wide. It is compatible with both tonneau covers and truck caps. It is also available in a silver finish as part # BX4004-01. I have linked an installation video and the written instructions have been forwarded in a separate email. The Topline expander clips into the two steel mounting brackets that affix to the tail gate. (It can be removed...
    view full answer...

  • Fit of Topline Bed Extender on 2005 Ford Explorer Sport Trac
  • Topline does not list specific vehicle fits for this item. As long as your tailgate is is between 48 and 64 inches wide and has flat areas to mount the brackets as shown in the photo, and the area where the brackets would mount is steel or there is steel under a bed liner, the Topline Truck Bed Expander would work just fine with your Explorer Sport Trac. The extender is also available in silver, as part # BX4004-01. The install video I linked you to shows the extender being installed...
    view full answer...

  • Will the Topline Bed Extender Fit a 2010 Ford F-150 FX4
  • According to Topline, the Bed Extender # BX4004-01, can be installed on trucks that have a tail gate cover that is plastic/fiberglass or a spray in type. The lift out bar could get in the way of the extender. But, the extender is width adjustable so you could move it in or out as needed and then install the mounting brackets.
    view full answer...

  • Will Fold Down Truck Bed Extender # BX4004-02 Fit a 2003 Ford Ranger Flareside
  • The Fold Down Truck Bed Extender-Black, part # BX4004-02, is designed to fit as many different trucks as possible. You will need to measure on your vehicle to determine if it will fit. It will need a minimum of 48 inches to fit. If the tail gate on your 2003 Ford Ranger Flareside is at least 48 inches wide and no greater than 64 inches wide, it will fit. The extender folds up flat against the tail gate when not in use and it will be 15-5/8 inches tall and protrude 5 inches into the bed...
    view full answer...

  • Will Topline Bed Extender # BX4004-01 Fit on 2012 Dodge Ram Pickup With Plastic Bed Liner
  • The Topline Bed Extender # BX4004-01 you referenced will fit on your 2012 Dodge Ram Pickup, but since you have a plastic bedliner, you may have to do some trimming of that liner prior to installing the bed extender. It is recommended that the mounting brackets of the bed extender attach directly to the metal of the tailgate and if the bed liner interferes, we recommend trimming that section. Some drilling is also required for installation. The extender is lightweight and is easy to remove...
    view full answer...

  • Availability of a Truck Bed Extender for a 2005 Hummer H2
  • You will need to measure the width of the bed on your Hummer H2. The # BX4004-02 or the # BX4004-01 could potentially work as they are designed to fit tailgates that are between 48 and 64 inches in width.
    view full answer...

  • Topline Bed Extender for 2013 Ford F 150 With 6.5 ft Bed and Tailgate Step
  • We have not yet tested a Topline Truck Bed Extender on a Ford Truck with the integrated tailgate step. From the research I've done, you won't be able to use the flip-up grab bar with the extender folded flat against the tailgate like you see in the provided photo. In order to install the mounting brackets, the tailgate needs to have flat areas along each side for the brackets to mount flat against the inside of the tailgate. The bracket can mount to the plastic liner on the inside of...
    view full answer...

  • Do You Have Cargo Control Solutions for a 2000 GMC Sierra Stepside Bed Style Pickup Truck
  • We have two options available for you that will fit your 2000 GMC Sierra step side bed, part # BX4004-01 or part # BX4004-02 are silver and black bed extenders that will effectively extend your bed size, and offer smaller area at the back of the bed when the tailgate is closed, to keep items from sliding around.
    view full answer...

  • Will the Topline Folding Bed Extender Fit on a 2010 Toyota Tundra With Tonneau Cover
  • You may have to open your tonneau cover to open and close the tailgate with the Topline Bed Extender, # BX4004-02, installed. This bed extender can fold down, but it will extend approximately 5 inches in from the tailgate and interfere with the tonneau cover. This bed extender is also available in silver as part # BX4004-01.
    view full answer...

  • Will Topline Fold-Down Truck Bed Expander # BX4004-02 Fit a 1994 Toyota Short-Bed Pickup
  • The Topline Truck Bed Expander # BX4004-02, which is also available in silver color as part # BX4004-01, expands in width from 48 to 64 inches. It will fit the vast majority of truck beds as long as the width of the bed at the tail gate falls within this range. Installation requires drilling into the tailgate. If there is a bed liner in place this may need to be trimmed to enable the two mounting brackets to attach to the tailgate with metal-to-metal contact. In a separate email...
    view full answer...

  • Is Drilling Necessary For Topline Bed Extender # BX4004-1 on 2003 Ford Ranger
  • To install the Topline Bed Extender # BX4004-1 on your 2003 Ford Ranger, drilling will be required and there may be some trimming of your existing bedliner necessary. I have included a graphic showing where the drilling will need to be done. You may also be interested in the Loctite Threadlocker # LT37418 to ensure a tighter fit for the screws. I have included a link to instructions on the proper application of this product.
    view full answer...

  • Which Mounting Bracket Kit Fits Topline Bed X-Tender for a 2003 Toyota Tacoma
  • For the Topline Bed X-Tender, # BX4004-01, for the 2003 Toyota Tacoma, you will not need any additional brackets or parts to install it on your truck. It attaches to the tailgate using included brackets and hardware. Take a look at the pictures below the description on the product page to see some close ups of the extender.
    view full answer...

  • Fit of Topline Bed Extender Part # BX4004-01 on 2003 Ford Ranger
  • The Topline fold down bed extender you referenced, part # BX4004-01 will indeed fit the bed of your 2003 Ford Ranger. In addition to the sliver finish, the extender is also offered in an anodized black finish, part # BX4004-02. Unlike many bed extenders, the Topline model will fold up flat against the tail gate when not in use, only using 5 inches of space. To temporarily remove the extender, simply pull two pins. The extender is compatible with tonneau covers and bed caps.
    view full answer...

  • Truck Bed Extender For 2013 Chevrolet Avalanche
  • For your 2013 Chevrolet Avalanche the Topline Bed Extender, part # BX4004-01 would be a good fit. I have attached a link to an installation video for this on a Sierra. Although the truck is different, the installation will be similar. This extender is constructed of stainless steel and anodized aluminum to resist corrosion. It is easily removed with just 2 pins and is a durable, light weight system that takes up only 5 inches of the truck bed when folded. This extender has a silver...
    view full answer...


Do you have a question about this Bed Extender?



Info for this part was:


Expert Research:
Michael L

Expert Research:
Sarah L

Expert Research:
Robert G

Expert Research:
Michael H

Expert Research:
Jameson C

Video by:
Joshua S

Test Fit:
Nicholas E

Video Edited:
Jacob T

Updated by:
Adele M

Expert Research:
Brandon M

Video Edited:
Mike H

Updated by:
Laura H

Photos by:
Jim W

Expert Research:
Jeffrey L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.










Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com