Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.
Ball set with nickel-plated 1" diameter, 2-1/2" long shank. Three hitch balls with 1-7/8", 2" and 2-5/16" diameters. 10,000 lbs GTW. Corrosion and rust resistant.
Changing your hitch ball size is as easy as pushing out the integrated pin.
No need to get out the heavy wrenches. Convert-A-Ball's interchangeable balls are equipped with integrated pins, making it easy to change out your hitch ball for one of another size.
To switch balls, simply push in the integrated pin (using a pen or your finger) to release and remove installed ball. Then just replace with different-size ball, reversing the process.
This Convert-A-Ball interchangeable ball set exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
Video of Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank - Nickel
Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.
Today were to review part number 900B. This is the Convert-A-Ball Interchangeable Ball Set. This ball set will come with a chrome, one-inch diameter long shank, comes with a three hitch balls, a 1 7/8-inch which is usually marked right on the top, the two-inch which should be marked there and the largest 2 5/16. This does have a 10,000 pound gross towing rate capacity. It is corrosion and rust-resistant and what this does is it makes changing out your Convert-A-Ball hitch balls with another ball size very easy; you just pop out the pin like that pin there and you replace it with any ball size that youre going to be towing. It includes the shank and the three heavy-duty balls.
Now, this part does use a new non-electric nickel-plating technology that produces a strong protective finish. It is corrosion-resistant, non-magnetic and stain-repellant and when its done it does have uniform coverage which will cover even hard to hit to recesses and it is an eco-friendly plating method which is less harmful to the environment than the traditional chrome electro-plating. This part is made in the USA; now it also comes with the washer and a nut which uses a 1 -inch wrench size to install the shank to your ball mount; you put the washer on and then put the nut on and tighten it down. It also comes with a cotter key that would insert after the bolt shank is installed; put the cotter key in that will help keep the nut from coming loose.Now, the shank does fit the one-inch diameter ball hole. The shank length is 2 and again it does have all three of the ball sizes.
This part does come with a two-year limited warranty and basically what I want to show you is how the balls will install onto the shank. What you do is to have a pin that is inserted in them, youd find the side that has the dimple on the pin and you could actually push it with your finger but sometimes your finger wont push it out enough to be able to grip it so what you want to do maybe is you just get a pin or screwdriver or something. Push it out, pull it all the way out. The other neat feature on the pins is if you look on each end of the pin there like a rubber O ring on this end and on this end and whats nice is when this is installed and completely inserted, it will seal to keep any dirt or anything from getting in there and causing any corrosion or problems. So, again if you pull this all the way out and then you have the hole in your shank, you just line it up with that hole push it through all the way so its flush and that will give you your 1 7/8inch size hitch ball then if you need to go to a different size, in this case the two-inch, again, just push the pin out all the way and line it up with the hole, all the way in, youre fine to go.
Take if off with your hand and where you can do the last one. This is the larger 2 5/16; just line that up, push it in. So, right there in a few seconds youve covered all three of the hitch ball sizes. This part is made in the USA and that should do it for part number 900B. .
Average Customer Rating: 4.9 out of 5 stars (45 Customer Reviews)Ball set with nickel-plated 1" diameter, 2-1/2" long shank. Three hitch balls with 1-7/8", 2" and 2-5/16" diameters. 10,000 lbs GTW. Corrosion and rust resistant.
by: Mike D02/03/2014
Very ingenious idea. Saves the hassle of having to switch receivers every time I change the type of trailer I'm towing. Also bought the carry case and hitch cover - very pleased with the purchase and would recommend to a friend! Thanks to etrailer for shipping the items so quickly and their usual outstanding service. 115586
very nice convert a ball This was to replace an old convert a ball that I had with a lower tow rating. I love how the new convert a ball holds the pin for the ball in place when not in use. The old ones would always fall out and I would have to figure out which one went with which ball each time I used it. I also like how the new one has a cotter pin so the nut can’t back off. I never had an issue with the old one but this is a piece of mind that it can’t. So this is a great improvement over the older versions. 2686
The interchangeable ball set is great! They're all extremely solid and should be able to handle anything and everything I throw at them. I wouldn't advise letting any of the balls stay on the pin when you're not towing - even though the pins are tight to begin with, I've seen some come loose over time, and without a trailer to keep the ball down on the pin, I'm sure they could vibrate off. 65492
I love the nickel plated finish. I bought this product in conjunction with an Alumistinger ball mount. I believe the extra cost of having this interchangeable ball is more than offset by its versatility of having different size balls that can be quickly changed as well as having a finish that is very resistant to rust and corrosion. Very heavy duty as well. 48112
by: Tom S09/24/2013
Product as described, as pictured, and all the specs were correct. I needed an adjustable hitch for different trailers (height) with a drop/rise of 8" and had a 2" ball and needed a 1 7/8's, so I decided to install this to have a hitch that can adjust to any height within a 16" range, and always have the right size ball. Would buy again. 101389
These are great. I have a set in the truck and SUV for general trailer pulling. With one shank and an adjustable hitch, I can adjust for any height or drop (+/- 10") and any size ball for under 100 bucks!!!!. Can't be beat. I do prefer the solid shank balls for anything really heavy (over 10,000) as I do trust them a bit more. 190981
Very easy to use around the farm when we have trailers that need three diffrent balls. 74888
by: Jim M09/02/2009
Great product Great product so easy to install and change balls it makes life for a muti-trailer owner quick and simple thanks etrailer for a great product and a super price. The price even after shipping was $10 cheaper than wal-mart and the quality was 100% better.Loved the super fast shipping and great customer service. 2333
by: David L.05/10/2013
Love the flexibility this offers. Since I haul mostly rental trailers, I never know what size ball I'll have. This makes it quick and easy to change to whatever I need. I'd suggest a bag to carry them though, I keep them in the spare-tire well, and they roll around if they aren't contained in something. 79760
Etrailer is unlike any other I have dealt with. You are kept informed from beginning to end of order. And quick, my last order was shipped same day and received in two days. This convert a ball is like so many other convenient products Etrailer sells. 96242
by: Larry P.10/16/2014
After seeing the video review on e-trailers, I ordered a set for myself. I'm glad I did. Now I can change ball sizes fast and easy. Ordering and delivery was quick and easy and was on time. I would shop at e-trailers again 156324
This is a top notch product with true "Made in America" quality. The machining and finish are impressive. Took me less than 5 minutes to have it installed on my truck and hooked to my horse trailer. Highly recommended! 203025
by: Keith S.08/09/2011
Have used Convert-a-ball hitch assemblies on previous vehicles and have always been well satisfied with the performance. I am also a consumer that prefers to buy American made products when possible. 21480
by: B Dog11/13/2012
I had a set of these on my old truck that I sold. They were the chrome balls. They worked great. I hope this brushed nickel finish will not easily rust. Looking forward to towing! 59405
by: Ed R.12/02/2011
I have past experience with the Convert-A-Ball and think it is a great unit. The price was very competitive and the product was delivered promptly. Many thanks! 27535
RECEIVED ORDER ---- EVERYTHING WAS AS ORDERED ---- QUICK SHIPPING ---- GREAT PRODUCT ---- WOULD DO BUSINESS WITH AGAIN ---- THANKS ---- 63195
by: John M04/25/2015
Works as advertised. Easy swap of ball sizes.. very handy on my tractor rear lift for moving different trailers around the property! 188165
It seems to be very good quality. I haven't had a chance to use this set yet, but I'm stratified with the quality of the product. 106901
as always , with all my orders so far ,no problem or complaint juist pleasant people to talk with and good products and service 159910
i use etrialer for all my needs....this ball set is awesome since i have a vast amount of things being pulled...very well made 47495
by: jim m.08/19/2015
This ball set does just what they said it would, this is the way to go if you might pull more than one trailer. 220389
i got it for my husband for christmas, he say it online and so i got it for him as far as i know he loves it. 58778
A very well made unit that save a pant load of time and issues for all your tow needs at a moments notice. 93664
by: Robert B.05/19/2015
Awesome Product it is very easy to Change the balls out. Just hope it holds up and I don't lose a ball 194415
by: jim b.09/22/2009
the best ever i love this.. i have had this on three trucks now and will only use it 2420
by: Royce K.08/05/2015
top of the line service and 2 days early delivery. I highly recommend to all.... 216829
by: Michael V.02/27/2012
I like the set up. I like the design knowing that it is tough and secure. Thanks 32635
by: Julie B05/17/2013
Fast delivery+++it's going to be nice to be able to switch out balls quick! 80701
by: John Palacio02/16/2011
Great product!!!!!!!!!!!!!!! The package was here very quickly!!!!!! 7239
by: Johnny T05/13/2015
Item was delivered on time and assembled easy and works great! 192569
by: Jorge V. - Miami, FL.05/22/2012
Great for when I tow either my pwc or my boat. Just swap-n-go. 41277
by: Phillip Cotton05/02/2012
Great ball set easy to setup and change balls Thanks 39138
by: Anthony C.06/07/2011
great interchangeable ball set and the quality is great! 16260
came in a timely manor everything was just as promised 184098
by: Gary in Stafford Springs,ct04/07/2015
Just what I needed for the new truck and fast delivery 183840
Super Fast delivery, great product, well pleased 68174
by: Jason W.06/25/2014
Very nice and strong ball kit. made in america 137710
by: Scott G06/02/2014
Fit and finish was great and shipping was fast 133790
Solid built. Very convenient. Great pro duct! 157387
2 days to my front door cant beat it 58071
Fast shipping and great price. 65815
by: Tony L.10/22/2014
See review on the receiver. 157448
by: Jamie b06/27/2014
Works great. Looks great. 138079
by: Donna L02/22/2011
Great Job, Good Product 7625
great product 83345
Ask the Experts about this Convert-A-Ball Balls
Do you have a question about this Ball?
At etrailer.com we guarantee:
Highest quality balls for the best price.
Real product know-how.
Most detailed, accurate ball information available.
Information for this part was:
Installations, made easy.
Personalized service for life.
Trusted since 1946.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.