Pintle Hook, Bolt-On, 10K

Tow Ready Ball Mounts - 63013

10K Pintle Hitch

Pintle hook can be bolted to a pintle hitch mount or directly to a reinforced truck bumper.

• 10,000 lbs GTW
• 2,000 lbs TW
• Mounting hardware included
• Mounting holes:
  • 3-3/8" wide(center to center)
  • 1-3/4" up/down (center to center)
  • 17/32" hole diameter
• Outside length, back to tip of hook: 6-3/8"
• Hole when closed: 1-3/4"
• Hole when fully opened:
  • Narrowest point: 2-1/4"
  • Widest point: 3-1/4"

Customers compare 63013 to these similar products

Pintle Hook, Bolt-On, 20K$49.95

Pintle Hook Mount, 7-1/2" Tall, 12K$50.95

Pintle Hook, Bolt-On, 30K$65.95

Pintle Hook Mount, 12-1/2" Tall, 8K$79.95

Pintle Hook with Shank, 10K$77.95

Customers Who Purchased This Ball Mounts Also Bought...

Bonded 4 Wire - per foot $0.57

Pintle Hook Mounting Kit $10.49

Pintle Hook Mount, 12-1/2" Tall, 8K $79.95

Pintle Hook Mount, 7-1/2" Tall, 12K $50.95

Trailer Hitch Pintle Hook Mount, 5" Tall, 6K $28.95

Ask the Experts about this Tow Ready Ball Mounts

• Will The 10K Bolt On Pintle Hook # 63013 Work On 3/4 Ton Military Trailer
  
• On your 3/4 ton military trailer the weight capacity should not be a problem with this Pintle Hook, you would just need to measure where you are going to mount this to see if it will fit. The Pintle Hook, Bolt-On, 10K, # 63013, can be bolted to a reinforced bumper or a pintle hitch mount. The mounting holes on the pintle hook are 3-3/8 inches wide from center to center and 1-3/4 inches up/down from center to center. The mounting hole diameter is 17/32 inches. If you are going to attach th
  view full answer...