Pintle Hook Combo 2-5/16" Ball with 2" Shank, 12K

Tow Ready Ball Mounts - TR63042

Tow Ready Combination Pintle Hitch with 2-5/16" Ball by Draw-Tite, Hidden Hitch and Reese

Use as a pintle hook for trailers with lunette rings and as a regular ball hitch with your standard trailer.

• 2-5/16" Trailer hitch ball
• Fits 2" x 2" trailer hitches
• Tongue weight: 2,400 lbs
• Ball capacity: 12,000 lbs
• Pintle capacity: 12,000 lbs
• Distance from center of hitch pin hole to center of ball: 11-3/4"
• Overall length: 15-1/2"

Customers Who Purchased This Ball Mounts Also Bought...

Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot $1.00

Pin and Clip For Class III, IV and V Trailer Hitch Receiver $4.99

Shackle Bolt with Locknut for Double-Eye Springs - 3" Long $1.44

Trailer Hitch Receiver Lock - Flush Design for 2" Trailer Hitches $19.95

Coupler and Pintle Pin - 1/4" $3.19

Ask the Experts about this Tow Ready Ball Mounts
Do you have a question about this Ball Mounts?

• Distance From Center of Trailer Hitch Pin Hole to Center of Ball on Pintle Hook Combo # TR63042
  
• I went out to the warehouse to measure a Pintle Hook Combo 2-5/16 Inch Ball with 2 Inch Shank, # TR63042. From the center of the hitch pin hole to the center of the ball hole is 11-3/4 inches. There is actually another alternative. For a 2 inch trailer hitch receiver, you can use a ball mount with an extra long shank. Several of these are actually longer than the TR63042. The Brophy Ball Mount, # BM20, measures 13-1/4 inches from the center of the hitch pin hole to the center of the ball hole
  view full answer...


• Can Pintle Hook Combo, # TR63042 Secure the Trailer Coupler to the Ball
  
• What I recommend is using the Trailer Coupler Towing Lock, # 63236. This lock fits on a 2-1/2 inch wide ball mount platform and has a 1 inch diameter hole for the ball shank. You can use ball # 63853. I have included a link to a video review of this lock for you to view. If you were to use Pintle Hook Combo, # TR63042, with a regular coupler using the ball mount feature, it is unlikely that you will be able to close the pintle hook part far enough to put the pin through. It would also rub aga
  view full answer...