Solid Aluminum Ball Mount - 2" Drop, 1" Rise - Anti-Rattle Tensioned - 14,000 lbs

Diversi-Tech Ball Mounts - DTBM4200

Solid aluminum ball mount gives you a 2" drop or, when flipped over, a 1" rise. Fits balls with a 1" shank diameter. Supports tongue weight of up to 2,000 lbs and tows up to 14,000 lbs.

Features:

• Solid, one-piece ball mount with built-in drop or rise lets you match the ball height of your vehicle with the tongue height of your trailer
• Ball mount is machined from a solid piece of aircraft-grade billet aluminum
  • Solid aluminum produces a lightweight yet strong ball mount
    • Avoids welds, which can cause weak points that might break
  • Polished finish creates a high-quality appearance
• Built-in anti-rattle system keeps ball mount quiet and lessens wear
  • Stops movement of ball mount when no trailer is attached
• Made in the USA

Specs:

• Fits: 2" x 2" trailer hitch receivers
• Ball hole diameter: 1"
• Ball platform thickness: 1"
• Towing capacity: 14,000 lbs
• Tongue weight capacity: 2,000 lbs
• Rise: 1" from the top of the hitch receiver opening
• Drop: 2" from the top of the hitch receiver opening
• Distance from center of hitch pin hole to center of ball: 8-1/4"
• 1-Year limited warranty

DT-BM4200 Diversi-Tech 2" Drop, 1" Rise Hitch - Solid Billet Aluminum

Video of Solid Aluminum Ball Mount - 2" Drop, 1" Rise - Anti-Rattle Tensioned - 14,000 lbs

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Diversi-Tech Aluminum 2 Inch Drop, 1 Inch Rise, Ball Mount Review

Customers compare DTBM4200 to these similar products

Solid Aluminum Ball Mount - 2" Drop, 1" Rise - Anti-Rattle Tensioned - 14,000 lbs$59.95

Self-Locking, Aluminum Ball Mount - 2" Drop, 1" Rise - Anti-Rattle Tensioned - 14,000 lbs$69.95

QuietRide Aluminum Ball Mount w/Lock, 3/4" Rise, 2" Drop, 1-1/4" Hole, 10,000 lbs$80.99

Forged Ball Mount 1" Rise or 2" Drop, 16,000 lbs$38.95

Alumistinger Ball Mount with 2" Drop or 1" Rise - 8,000 lbs GTW$39.95

Customers Who Purchased This Ball Mounts Also Bought...

Hitch Ball with 2" Diameter and Medium Shank, 6,000 lbs GTW - Stainless Steel $29.95

Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank - Stainless $77.95

Hitch Ball Cover for 1-7/8" and 2" Diameter Hitch Balls $2.64

Pin and Clip For Class III, IV and V Trailer Hitch Receiver $5.16

Trailer D-Ring Tie Down, Bolt On 2-1/2" x 2-3/8" Surface Mount $5.99

Ask the Experts about this Diversi-Tech Ball Mounts

• Aluminum Ball Mount Selection For 2005 Jeep Liberty
  
• A difference in length of your hitch, or ball mount will effect the clearance from the trailer to the rear of your Jeep Liberty. What you would want to do is measure the clearance needed on your Jeep Liberty. To measure the clearance needed, you will want to measure from the center of the hitch pin hole out 8-1/4 Inches. This will be the location of your hitch ball. Then what you can do is move your trailer and position the coupler to that approximate location to see if there will be any issues
  view full answer...


• What Trailer Hitch Balls are Recommend for the Solid Aluminum Ball Mount, # DTBM4200
  
• A ball with a medium shank, 2-1/8 inches or longer, will work fine with the Solid Aluminum Ball Mount, # DTBM4200. You will just need to make sure that there are at least 2 threads past the nut when it is properly tightened to the ball mount. Here are some of the balls we recommend: For a 1-7/8 inch diameter, # 63851 For a 2 inch diameter, # 63852 For a 2-5/16 inch diameter, # 63853
  view full answer...